Use of weibull statistics to quantify property variability in TiAl alloys

Tensile experiments have been performed on specimens of four different investment-cast TiAl-based alloys with variations in casting conditions. The average ductilities obtained in these experiments vary between approximately 0.8 to 2.0 pct plastic strain to failure in tension. By using the three-parameter form of the Weibull relation, with the 0.2 pct offset yield strength as the minimum failure strength, the resulting variability in the data can be quantified and is found to be similar for those alloys with similar microstructural scale (grain size). Large variations in lamellar volume fraction, segregation, and phase distribution have a minor influence on property variability, compared to changes in the scale of the grain structure caused by either variations in cooling rate during casting or the addition of grain refiners.     

Performance evaluation of a water/silicone oil two‐phase partitioning bioreactor using Rhodococcus erythropolis T902.1 to remove volatile organic compounds from gaseous effluents

BACKGROUND: In the framework of biological processes used for waste gas treatment, the impact of the inoculum size on the start‐up performance needs to be better evaluated. Moreover, only a few studies have investigated the behaviour of elimination capacity and biomass viability in a two‐phase partitioning bioreactor (TPPB) used for waste gas treatment. Lastly, the impact of ethanol as a co‐substrate remains misunderstood. RESULTS: Firstly, no benefit of inoculation with a high cellular density (>1.5 g L^?1) was observed in terms of start‐up performance. Secondly, the TPPB was monitored for 38 days to characterise its behaviour under several operational conditions. The removal efficiency remained above 63% for an inlet concentration of 7 g isopropylbenzene (IPB) m^?3 and at some time points reached 92% during an intermittent loading phase (10 h day^?1), corresponding to a mean elimination capacity of 4 × 10^?3 g L^?1 min^?1 (240 g m^?3 h^?1) for a mean IPB inlet load of 6.19 × 10^?3 g L^?1 min^?1 (390 g m^?3 h^?1). Under continuous IPB loading, the performance of the TPPB declined, but the period of biomass acclimatisation to this operational condition was shorter than 5 days. The biomass grew to approximately 10 g L^?1 but the cellular viability changed greatly during the experiment, suggesting an endorespiration phenomenon in the bioreactor. It was also shown that simultaneous degradation of IPB and ethanol occurred, suggesting that ethanol improves the biodegradation process without causing oxygen depletion. CONCLUSION: A water/silicone oil TPPB with ethanol as co‐substrate allowed the removal of a high inlet load of IPB during an experiment lasting 38 days. Copyright © 2008 Society of Chemical Industry     

Erfolgsfaktoren bei der Einführung von Wissensmanagementsystemen in die Praxis

Neben der Gestaltung technischer Systeme zur Unterstützung des Wissensmanagements ist die Ausgestaltung organisatorischer Ma?nahmen gleichbedeutend wichtig.     

Psychopathy, IQ, and Violence in European American and African American County Jail Inmates.

The accuracy of the prediction of criminal violence may be improved by combining psychopathy with other variables that have been found to predict violence. Research has suggested that assessing intelligence (i.e., IQ) as well as psychopathy improves the accuracy of violence prediction. In the present study, the authors tested this hypothesis by using a contemporary measure of psychopathy, the Psychopathy Checklist-Revised (R. D. Hare, 2003), in a sample of 326 European American and 348 African American male offenders. The postdictive power of psychopathy was evident for both ethnic groups and robust across most changes in the operationalization of violence and the analysis conducted, whereas the postdictive power of IQ was not. No Psychopathy x IQ interactions were identified. Implications of these results for violence prediction are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Dynamique motivationnelle de l'epuisement et du bien-etre chez des enseignants africains.

This study examines the links between antecedents and consequences of Gabonese teachers' (N= 152) work motivation. The theoretical underpinnings are based on the Motivational Model of Job Burnout (MMJB) which is grounded in Self-Determination Theory (SDT) and states that the more supervisors satisfy an employee's need for self-determination, competence, and relatedness, the more self-determined is the latter's work motivation. The level of self-determined motivation has an impact on job satisfaction, which in turn determines life satisfaction. Higher levels of self-determined motivation also buffer emotional exhaustion and psychological distress. The model was confirmed via structural equation modeling and provides support for the validity and generalizability of the MMJB and SDT. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Narcissism, sexual refusal, and aggression: Testing a narcissistic reactance model of sexual coercion.

Laboratory analog studies investigated the theory that narcissism and reactance contribute to causing rape. In Study 1, narcissism correlated positively with rape-supportive beliefs and negatively with empathy for rape victims. In Study 2, narcissists reported more enjoyment than other men of film depictions that presented consensual, affectionate activity followed by rape (but not in response to either affection or rape alone). In Study 3, narcissists were more punitive than other men toward a female confederate who refused to read a sexually arousing passage aloud to them. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A histological and histomorphometrical evaluation of screw-type calciumphosphate (Ca-P) coated implants; an in vivo experiment in maxillary cancellous bone of goats

The bone response to different calcium phosphate (Ca-P) coated implants was evaluated in a goat animal model. Two types of plasma spray coatings were applied to a commercially pure titanium (cpTi) tapered, conical screw-design implant (BioComp^®); hydroxyapatite (HA-PS) and a dual coating, consisting of FA and HA (FA/HA-PS). In addition an amorphous RF magnetron sputter coating (Ca-P-a) and uncoated implants were investigated. Forty-eight implants were inserted in the maxilla of 12 adult female goats. After implantation periods of 3 and 6 months, the bone implant interface was evaluated histologically and histomorphometrically. After both implantation periods all plasma spray coated implants were maintained. On the other hand three Ca-P-a and two cpTi implants were lost. Histological examination revealed a better bone response to both plasma spray coated implants. Histomorphometrical evaluation confirmed this finding. At 3 and 6 months significantly higher percentages of bone contact (p<0.001, ANOVA) were measured for both plasma spray coated implants than for the cpTi and Ca-P-a implants, while no significant difference (p<0.05) existed between both implantation periods. Degradation of both plasma spray coatings was observed. Supported by the results, it is concluded that, although Ca-P coatings can improve the performance of dental implants, the presence of a Ca-P coating is not the only important factor for bone healing around implants placed in low density trabecular bone.     

Photoelectrocatalytic humic acid degradation kinetics and effect of pH,applied potential and inorganic ions

This study addresses the removal of humic acid (HA) dissolved in an aqueous medium by a photoelectrocatalytic process. UV₂₅₄ removal and the degradation of color (Vis₄₀₀) followed pseudo‐first order kinetics. Rate constants were 1.1 × 10^?1 min^?1, 8.3 × 10^?2 min^?1 and 2.49 × 10^?2 min^?1 (R² > 0.97) for UV₂₅₄ degradation and 1.7 × 10^?1 min^?1, 6.5 × 10^?2 min^?1 and 2.0 × 10^?2 min^?1 for color removal from 5 mg dm^?3, 10 mg dm^?3 and 25 mg dm^?3 HA respectively. Following a 2 h irradiation time, 96% of the color, 98% of the humic acid and 85% of the total organic carbon (TOC) was removed from an initial 25 mg dm^?3 HA solution in the photoanode cell. Photocatalytic removal on the same photoanode was also studied in order to compare the two methods of degradation. Results showed that the photoelectrocatalytic method was much more effective than the photocatalytic method especially at high pH values and with respect to UV₂₅₄ removal. The effect of other important reaction variables, eg pH, external potential and electrolyte concentration, on the photoelectrocatalytic HA degradation was also studied. Copyright © 2003 Society of Chemical Industry     

The MITRE E3 family of models structure and results

A family of energy/economic/environmental (E³) models is presented as a mechanism for analysing national policy issues. The family consists of discrete models which are designed to be run in an integrated manner. The outputs of certain models provide the inputs to the next. This structure allows the analyst to readily incorporate an understanding of regional factors such as local energy prices, concerns over air quality, water availability, or attitudes towards construction of new energy facilities, into national assessments of energy policies. This paper reviews the analytic framework within which energy policy issues are currently addressed. The initial family of E³ models is described with the emphasis on the data linkages and feedback which are provided when these models are run sequentially. The ongoing MITRE research programme with the E³ family of models is presented and plans and opportunities for future work are outlined.