Nonuniformity of phase structure in immiscible polymer blends

This article is focused on the phase structure development in immiscible polymer blends during melt mixing. Nonuniformity of the phase structure, i.e., the coexistence of areas containing particles with markedly different size distribution, was detected in quenched and compression molded samples of a number of various blends prepared by long and intensive mixing in the chamber of a Plasticorder. The same effect was found also for polystyrene/polyamide blends prepared in a twin‐screw extruder. It was shown that neglecting nonuniformity of the phase structure can lead to considerable error in evaluation of the effect of system parameters on the blend morphology. The reasons for the effect were discussed and it was found that inhomogeneous flow field in mixers is a plausible explanation of the nonuniform phase structure. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Microstructural and compositional aspects of ZnO-based varistor ceramics prepared by direct mixing of the constituent phases and high-energy milling

ZnO-based varistor samples were prepared by the direct mixing of the constituent phases (DMCP) and sintering at 1100 °C for 2 h. The influence of the starting powder mixture's composition – the amounts of the pre-reacted varistor compounds and their composition – and its preparation, either with or without mechano-chemical activation (MCA), on the microstructure, phase composition and electrical characteristics of the varistor samples was studied. It showed that MCA improved the density and microstructural homogeneity of the varistor samples. MCA strongly affected the grain growth: it enhanced the nucleation of inversion boundaries (IBs) in the ZnO grains and the IBs-induced grain-growth mechanism resulted in uniform grain growth and hence a microstructure with smaller ZnO grains and a narrower grain size distribution. The final phase composition of the samples prepared by the DMCP method mainly depended on the presence of varistor dopants that can prevent the formation of the pyrochlore phase, especially Cr₂O₃, while MCA can affect it mostly by providing a homogeneous distribution of those dopants. The DMCP varistor samples prepared with MCA had much better current–voltage characteristics than the samples of the same composition prepared from unactivated powders.     

Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

A unified approach for the analysis of grating-assisted couplers

Two coupled-mode theories based on individual waveguide modes and compound system modes, respectively, are briefly reviewed with proper modification and new comments. The relation between these two theories is built and it is found that one theory is actually an efficient approximation of the other. Also, the reason why the results obtained with the first more accurate than those obtained with the second is found. The constraint on both approaches is shown     

Einsatz von alternativen Reaktionsmedien für eine umweltverträglichere chemische Produktion

Use of alternative reaction media for an environmentally safer chemical production. The way in which a chemical reaction is carried out and the composition of the reaction mixture diotate the degree of difficulty of downstream processing operations, not only in terms of energy consumption but also with respect to environmental pollution. A specific environmental protection that is an integral part of the production process must therefore begin with the examination of the chemical rection step. Restructuring a process from a reaction engineering point of view includes two important aspects of which the technical implementation has not yet been systematically examined and which therefore should promise a significant potential for innovation. These are the integration of modern separation operations in the chemical reactor with the aim of shifting the chemical equilibrium and the choice of an alternative reaction medium; although the latter also serves the same purpose, it can bring about a significant reduction in environmental pollution. This aspect is the focus of this paper, in which the advantages of molten salts, supercritical fluids and microemulsions as alternative reaction media are discussed.     

An approach to emulating separable graphs

A technique foremulating multicomputer interconnection networks that are based onseparable graphs (graphs having bounded degree and sublinear multicolor recursive bisectors) is presented. Efficient emulations among interconnection networks are necessary for porting programs designed for one network to another.Emulations are formalized asgraph embeddings, where the nodes (processors) of theguest graph (emulated network) are assigned to nodes of thehost graph (emulator), while the edges (communication links) of the guest are routed via paths in the host. The communication slowdown in an emulation depens on thedilation (length of the longest routing path) and thecongestion (number of paths that contend for a host edge) of the embedding. Theexpansion of the embedding (the ratio of the sizes of the host to guest) determines the inefficiency of processor utilization. Cell trees are introduced as interconnection networks whose special communication properties enable them to serve as intermediate devices in these emulations. Nodes in cell trees are organized into equinumerous parts calledcells; the cells are labeled by nodes of a complete binary tree. Communication in cell trees is restricted to two specific and distinct primitives:cell communication is confined within cells, whiletransfer communication occurs between adjacent cells. Rather than solved directly, the emulation problem for the original guest-host pair is decomposed into two independent parts: emulating the guest by the cell tree, and emulating the cell tree by the host.In emulations of separable graphs by cell trees, the node assignment that ensures small dilation is derived from the separator-based decomposition of guest graphs. The congestion-free edge routing is achieved by coordinatingglobal andlocal phases, which are based on two characteristic cell-tree communication primitives.The technique is instantiated by emulating cell trees on specific host graphs. Withshuffle-like hypercube-derivative networks as hosts new constant-expansion emulations are obtained that have both dilation and congestion logarithmic in the size of the multicolor bisector of guest graphs. These emulations are the first such to have optimal (up to constants)congestion; they provide the firstoptimal algorithm for emulating arbitrary separable graphs on shuffle-like networks. The application of the technique tohypercubes as hosts also produces optimal emulations that differ from those previously known by having smaller expansion constants.This research was supported in part by NSF Grants CCR-88-12567 and CCR-90-13184, and by the University of Massachusetts Graduate School Fellowship for the academic year 1991-92. A preliminary version of this paper was presented at the 3rd ACM Symposium on Parallel Algorithms and Architectures, July 22–24, 1991, in Hilton Head, South Carolina, USA.     

Correlation between magnetic hysteresis and magnetic relaxation in YBaCuO single crystals

The dependence of the magnetic momentm obtained from the hysteresis loops on the speed of the magnetic field sweep =dH _ext/dt is explained on the basis of Anderson's interpretation of the magnetic flux creep. In addition, a phenomenological model is suggested which predicts a linear dependence ofm on ln with the slope m/ ln , numerically equal to the relaxation rate m/ ln(t) from the usual magnetic relaxation. Such linear relations betweenm and ln were observed experimentally in single crystals of YBaCuO. Preliminary experiments on the complementary time dependent relaxation ofm after a simulated step change ofH _ext gave mostly relaxation rates close to the predicted values. The model here presented also enables one to compare the critical state in the superconductor at a field sweep rate with the critical state at some timet _eff after a step change ofH _ext. The values of analyzed in our experiments actually correspond to the critical state at timest _eff between0.04 and4 sec after an imaginary large step change ofH _ext.