Novel strategy for encapsulation and targeted delivery of poorly water-soluble active substances

Carriers for targeted delivery and controlled release of poorly water-soluble active substances (PWSAS) are facing three challenges: (a) the encapsulation issues, (b) limitations of PWSAS water solubility, and (c) burst drug release which can be pharmacologically dangerous and economically inefficient. The present study brings a novel strategy for encapsulation and controlled release of PWSAS—caffeine in concentrations which are higher than its maximal water solubility without the possibility of burst effect. The modification of hydrophilic carrier based on poly(methacylic acid) was done using casein and liposomes. To further increase the maximal caffeine loading inside the carrier nicotinamide was used. The release study of the encapsulated PWSAS was elaborated with respect to morphology of the carriers and interactions that could be established between its structural components. The carriers swelling and the release of caffeine and nicotinamide were also investigated depending on caffeine concentration, the presence of different liposomal formulations and the volume ratio of liposomal formulation, in three media with different pH simulating the path of the carrier through the human gastrointestinal tract. The synthesized carriers are promising candidates for encapsulation of PWSAS in concentrations which are higher than its maximal water solubility and for the targeted delivery of those dosages.     

Measuring probe for fast transients monitoring in gas insulatedsubstation

This paper describes the construction of four probes adjusted for fast transient monitoring in 123 kV SF₆ insulated substations. The primary requirement was the ability to monitor without distortion very fast transients containing frequencies up to 200 MHz. The measuring system was tested and calibrated with the help of computer modeling techniques. The verified experimental apparatus was then used for testing and calibrating the measuring probes. During the test, various effects on the measuring system characteristics were analyzed with respect to materials used for the components of the system     

Electrooxidation of CO and CO/H2 mixtures on a Pt-Sn catalyst prepared by an implantation method

A new type of ion implantation technique is used to create a non-equilibrium Pt-Sn(IMP) near-surface alloy with ca. 8.6 at% Sn. The surface composition was determined by low-energy ion-scattering (LEIS). The kinetics of the electrooxidation of CO and 2% CO/H₂ mixtures on Pt-Sn(IMP) is essentially identical to that of Pt₃Sn(110). The fact that any non-equilibrium composition can be easily prepared by this implantation method opens an interesting practical opportunity to create a new Pt-Sn alloy fuel cell catalyst having an otherwise unobtainable surface composition of Sn. This method also appears to have general utility in alloy catalysis as a means of exploring compositions in thermodynamically unfavorable regions of the bulk phase diagram. This revised version was published online in July 2006 with corrections to the Cover Date.     

Chemical correlates of α-tocopherol (Vitamin E) alteredMalacosoma disstria herbivory inFraxinus pennsylvanica var.Subintegerrinia,green ash

The antioxidant -tocopherol (vitamin E), applied in a basal trunk band to the green ash tree,Fraxinus pennsylvanica var.subintergerrinia, elicited an alteration of foliar feeding byMalacosoma disstria larvae (Lepidoptera: Lasiocampidae). The bioassayed effects were dependent on the dosage of elicitor, the time after elicitation, and the position in the tree. Leaves for chemical analysis were collected from trees receiving two dosages and at two intervals after elicitation. Compounds in the ethyl acetate extractables from the ash tree leaves were separated by TLC and HPLC. TLC separations showed differences in the nonhydrolyzed extractables attributable to elicitor dosage and time after elicitation. TLC-resolved differences were also evident among acid-hydrolyzed samples. HPLC-resolved profiles revealed eight peaks in the nonhydrolyzed extractables that were quantitatively negatively correlated with larval feeding preference between elicited versus control foliage on at least one of the two sampling dates. Results from this study and other investigations reported in the literature indicate that the antioxidant-tocopherol (vitamin E) can function as an environmental-stress elicitor of alterable defensive chemistry in green ash and other plants.     

Structural components in needle-cokes as studied by etching with chromic acid

Structures within commercial calcined needle-cokes are characterized by optical microscopy to reveal optical texture and by scanning electron microscopy before and after etching with chromic acid solution at 400 to 423 K. The needle-cokes exhibit an optical texture of medium and coarse-grained mosaics, acicular flow domains and flow domains. The etching studies indicate that the acicular flow domains are made up of rolled and convoluted lamellae which etch to form laths (needle-like) 3 m across. The mosaics appear when the rolled structures are viewed microscopically sectioned perpendicular to the lamellae. The acicular flow domains appear in longitudinal section. The etching of the flow domains shows that they have a sedimentary structure, 1 to 2 m layer thickness, suggesting that mesophase coalesces within a layer but not between layers. A model is proposed to explain the origin and separation of structures in needle-cokes as created in the delayed coker.     

An exact formula for "Tooth-to-Tooth" permeance

We present a new, completely original exact method to determine the permeance between two opposing iron teeth. This configuration is important because it is often encountered in electrical machines and apparatus. The method is based on conformal mapping. The given "tooth-to-tooth" configuration is mapped into a simpler one, in which the same permeance can be analytically determined. We derive an explicit formula for this permeance, and confirm our results using the finite-element method.     

Determination of tooth cogging force in a hard-disk brushless DC motor

The paper proposes a new method to determine the tooth cogging force in a brushless DC (BLDC) motor which is used in a hard-disk application. This force might be a source of tooth vibrations and motor noise. In the new method, the permanent-magnet (PM) poles are substituted with their equivalent currents. Then, the conformal mapping (CM) method is applied to determine the PM magnetic field. Finally, the cogging force is determined by integrating the magnetic field pressure over the tooth surface. The paper also analyzes the harmonic content of both radial and tangential force components.     

Progress in application of high temperature superconductor in tokamak magnets

It has long been known that high temperature superconductors (HTS) could have an important role to play in the future of tokamak fusion research. Here we report on first results of the use of HTS in a tokamak magnet and on the progress in design and construction of the first fully-HTS tokamak.     

Thermal analysis and microscopic characterization of the piston alloy AlSi13Cu4Ni2Mg

In this research paper, the phases identified by thermal and microscopic analysis of the piston alloy AlSi13Cu4Ni2Mg, which was solidified under different conditions, are presented and compared with different piston alloys. Piston alloys are a group of casting Al–Si alloys, well-known as wear resistant materials, which are widely used as the piston materials for internal combustion engines because of their low thermal expansion coefficient and high wear resistance when alloyed with other elements such as copper, magnesium and nickel. Depending on the combination of alloying elements and other impacting factors, pistons alloys with different mechanical and physical properties are obtained.     

Electrochemical routes for environmentally friendly recycling of rare-earth-based (Sm–Co) permanent magnets

Journal of Applied Electrochemistry - The consumption of critical raw materials, especially those in permanent magnets of Nd–Fe–B and Sm–Co-type, has significantly grown in the...