Matrix influence on the piezoelectric properties of piezoelectric ceramic/polymer composite exhibiting particle alignment

This study was addressed to the influence of an electric field strength applied at fabrication process and matrix properties, such as the dielectric constant and the Young's modulus, on “pseudo‐1‐3 piezoelectric ceramic/polymer composite” in order to further enhance the piezoelectricity of that. The pseudo‐1‐3 piezoelectric ceramic/polymer composite consists of linearly ordered piezoelectric ceramic particles in polymer material. Silicone gel, silicone rubber, urethane rubber, and poly‐methyl‐methacrylate, which exhibit different dielectric constants and Young's modulus, were used as matrices to evaluate the matrix influence. The piezoelectricity of the pseudo‐1‐3 piezoelectric ceramic/polymer composite was evaluated using the piezoelectric strain constant d₃₃. The d₃₃ is one of the indices of the piezoelectric properties for piezoelectric materials. As a result, it was confirmed that d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite increased with the increase of the electric filed strength applied at fabrication process, though, it reached a constant value at a certain strength value. Further it was confirmed that dielectric constant of the matrix had a small influence on d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite, however, in case of matrix of lower Young's modulus, d₃₃ was increase. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41817.     

Unperturbed dimension of poly(4-acetoxystyrene) measured in good and theta solvents

In order to obtain the additional data concerning the unperturbed dimension of poly-4-substituted styrene, light scattering measurements are performed on the twenty-two fractions with molecular weight of (0.91–352)·10⁴ of poly(4-acetoxystyrene) in dioxan at 25°C, from which the molecular weight obtained was found easily to be evaluated with the gel permeation chromatography using THF. Phase separation experiments for this polymer indicate that the theta state is attained in isopropyl acetate at 19.7°C and butyl acetate at 26.8°C. By making viscosity measurements at that state, the value of K_Θ is directly evaluated as 5.4·10^?4 dl g^?1. The limiting viscosity number is also obtained in good solvents, THF and dioxan, at 25°C and constants of the Mark-Houwink-Sakurada equation in each solvent are determined. Further, approximately the same K_Θ as above is obtained from these data with the Stockmayer-Fixman plot. The calculated value of steric factor, 2.37, on this polymer may be plausible, compared with those of polyvinylaromatic derivatives.     

Impulse breakdown voltages of triggered multistage vacuum gap

Several sealed-off triggered vacuum gaps are connected in series to improve hold-off voltage. The characteristics of impulse breakdown voltage of these series-connected gaps are investigated experimentally. The sum hold-off voltage of series-connected gaps decreases to a unit hold-off voltage when the maximum value of voltage division ratio across the gaps increases to unity. Self-breakdown probability of the series-connected gaps is always higher than that of a single gap under the same conditions. Hence, stage efficiency of the multistage gap decreases with increasing number of stages. Its value is 90 percent with 2-stage gap and 75 percent with 5-stage gap, respectively, under the same voltage division ratio and the same gap length (2.0 mm) in each stage. Triggered breakdown voltage of 2- or 3- stage gap is several hundred volts when all gaps are triggered simultaneously at the peak of the main impulse wave and a working voltage range is nearly 100 percent in this case. The working voltage range decreases with number of stages. Its value is 45 percent with 3-stage gap and 15 percent with 5-stage gap, respectively, when one triggered gap is fired for switching.     

Extensions of polyacrylic acid ammonium salts in the adsorption layer to fluidize alumina slurries

An average shell volume occupied in the adsorption layer on alumina by a polyacrylic acid ammonium salts molecule (PAA) defined as the average area occupied by an adsorbed PAA on alumina multiplied by the average thickness of the water layer at the limit of thickening, has been calculated from the adsorbed amount of PAA and from the flow points of alumina in the presence of PAA of different molecular weights. A steric effect of the PAA dispersant on the dispersion of alumina resulted in a flow with no yield stress. This was due to the change of the extension of PAA in the adsorption shell from a sphere to an ellipsoid with a long axis which exceeded the effective distance that the van der Waals attraction force reaches at a molecular weight for the PAA of between 10 000–20 000.     

Photochemical identification of transmembrane segment IVS6 as the binding region of semotiadil, a new modulator for the L-type voltage-dependent Ca2+ channel

To identify the binding domain of a new Ca2+ antagonist semotiadil on L-type Ca2+ channels from skeletal muscle, photolabeling was carried out by using an azidophenyl derivative of [3H]semotiadil. Photoincorporation was observed in several polypeptides of membrane triad preparations; the only specific photoincorporation was in the alpha1 subunit of the Ca2+ channel. After solubilization and purification, the photolabeled alpha1 subunit was subjected to proteolytic and CNBr cleavage followed by antibody mapping. Specific labeling was associated solely with the region of transmembrane segment S6 in repeat IV. Quantitative immunoprecipitation was found in the tryptic and the Lys-C/Glu-C fragments of 6.6 and 6.1 kDa, respectively. Further CNBr cleavage of the Lys-C digests produced two smaller fragments of 3.4 and 1.8 kDa that were included in the tryptic and Lys-C/Glu-C fragments. The smallest labeled fragments were: Tyr1350-Met1366 and Leu1367-Met1381 containing IVS6, a possible pore-forming region. The data suggest that semotiadil binds to a region that is overlapped with but not identical to those for phenylalkylamines, dihydropyridines and benzothiazepines. The present study also provides evidence that region IV represents an important component of a binding pocket for Ca2+ antagonists.     

Rates for intramolecular excimer formation of poly(α-methylstyrene) measured by using picosecond pulse radiolysis

Summary The rate constants for intramolecular excimer formation, k_DM, of poly(α-methylstyrene) with different molecular weight were determined by using picosecond pulse radiolysis. Values of k_DM for poly(α-methylstyrene) are a little smaller than those for polystyrene with nearly same molecular weight. It appears to be mainly due to steric hindrance by methyl substituent of main chain.     

Preparation of poly(p-phenylene terephthalamide)/poly(vinyl chloride) molecular composite and its thermal and mechanical properties

Poly(p-phenylene terephthalamide) (PPTA) was blended with poly(vinyl chloride) (PVC) by solution-blending method. PPTA was metalated for dissolving in dimethyl sulfoxide. Dimethyl sulfoxide was used as a common solvent. In PPTA/PVC composite, PPTA accelerated the thermal degradation of PVC. PPTA molecules are aggregated as microfibrillar form in PVC matrix. Such microfibrils are dispersed homogeneously in PVC matrix, according to polarizing microscopic observation. The average diameter of the microfibrils becomes smaller in the composite with lower content of PPTA. In the surface region of PPTA microfibrils the intermolecular hydrogen bonds between C? Cl of PVC and N? H of PPTA are formed. Young's modulus and the yield stress at room temperature were higher in the composites than those in PVC. The modulus of the composites was higher, especially at the high temperatures above their glass transition temperatures, than that in PVC. The temperature dependence of modulus can be calculated by using the mechanical model equivalent to the quasi-3-dimensional microfibrillar model which will be approximately applied to the composite structure. It becomes apparent that the modulus of the PPTA microfibrils evaluated by using the mechanical model is higher in the higher molecular weight PPTA.     

Interactions oftrans-cinnamic acid,its related phenolic allelochemicals,and abscisic acid in seedling growth and seed germination of lettuce

Phenolic compounds have been identified as the most common allelochemicals produced by higher plants. Inhibitions of cinnamic acid, its related phenolic derivatives, and abscisic acid (ABA) on seedling growth and seed germination of lettuce were studied.trans-Cinnamic acid, ando-,m-, andp-coumaric acids inhibited the growth of etiolated seedlings of lettuce at concentrations higher than 10^–4 M and seed germination above 10^–3 M. Coumarin inhibited seedling growth and seed germination at 10^–5 M or above. Chlorogenic acid inhibited seedling growth above 10^–4 M, but did not inhibit seed germination at 10^–5–5×10^–3 M. Low concentrations (below 10^–3 M) of caffeic and ferulic acids promoted the elongation of hypocotyls, but higher concentrations (over 10^–3 M) inhibited seedling growth and seed germination. These phenolic compounds and abscisic acid had additive inhibitory effects both on seedling growth and seed germination. The inhibition on lettuce was reversed by caffeic and ferulic acids at concentrations lower than 10^–3 M except for the inhibition of germination by coumarin. These results suggest that in naturetrans-cinnamic acid,o-, m-, p-coumaric acids, coumarin, and chlorogenic acid inhibit plant growth regardless of their concentration. However, caffeic and ferulic acids can either promote or inhibit plant growth according to their concentration.     

Basic study about cooperative movement between a human and an agent with entrainment

The use of an agent in the environment, as in medical treatment, welfare, the construction field, and the home, is examined. It is necessary for the agent to be able to work cooperatively with a human, and that may be a problem. Therefore, this study pays attention to the phenomenon that is called entrainment. This is the phenomenon where the rhythm of a certain person and the partner in the communication is synchronized. The purpose of this study is to perform a basic examination into applying an entrainment in order to realize cooperation in operations between a human and an agent. Since many human rhythms are expressed by a nonlinear oscillator, we simulated limited cycle oscillators, which are one of two nonlinear oscillators that cause interactions between agents, as the basic examination for this achievement. Consequently, entrainment of limited cycle oscillators with rhythms which differ has been checked in certain conditions. As a result, the possibility that cooperative movement could be gained was suggested.