Analysis of the MSS51 region on chromosome XII of Saccharomyces cerevisiae.

We have localized gene MSS51 on chromosome XII of Saccharomyces cerevisiae between the RDN1 and CDC42 loci. 'Head to head' with MSS51 is another gene, QRI5, the function of which is unknown. However, the proximity of these genes, the structure of the intergenic region and the presence of an ABF1 binding site right in the middle of this region suggest that the MSS51 and QRI5 expressions are submitted to a common regulatory process.     

A 63-mW H.264/MPEG-4 audio/visual codec LSI with module-wise dynamic Voltage/frequency scaling

A single-chip H.264 and MPEG-4 audio-visual LSI for mobile applications including terrestrial digital broadcasting system (ISDB-T / DVB-H) with a module-wise, dynamic voltage/frequency scaling architecture is presented for the first time. This LSI can keep operating even during the voltage/frequency transition, so there is no performance overhead. It is realized through a dynamic deskewing system and an on-chip voltage regulator with slew rate control. By the combination with traditional low power techniques such as embedded DRAM and clock gating, it consumes only 63 mW in decoding QVGA H.264 video at 15 frames/sec and MPEG-4 AAC LC audio simultaneously.     

Nanostructures for chemical recognition using ISFET sensors

The application of Langmuir-Blodgett (LB)-fabricated nanostructures on Ion selective Field Effect Transistors (ISFET) is of great interest since it permits the combination of a micro-scale device with a nanoscale material. In this article, the optimization of a LB-monolayer for calcium and sodium detection is carried out by characterization with XPS and AFM techniques, followed by electrochemical characterisation onto ISFET sensors. Physico-chemical modifications of the surface and good cation complexation of the ionophores fixed in the monolayers were observed with XPS studies. AFM images showed the presence of a unhomogeneous layer all over the ISFET surface. The electrochemical response of those monolayers onto ISFETs demonstrated the feasibility of this technology for sensor membrane fabrication and it opens further studies for other kind of devices such as optochemical sensors.     

0.5-μm 3.3-V BiCMOS standard cells with 32-kilobyte cache andten-port register file

BiCMOS standard cell macros, including a 0.5-W 3-ns register file, a 0.6-W 5-ns 32-kbyte cache, a 0.2-W 3-ns table look-aside buffer (TLB), and a 0.1-W 3-ns adder, are designed with a 0.5-μm BiCMOS technology. A supply voltage of 3.3 V is used to achieve low power consumption. Several BiCMOS/CMOS circuits, such as a self-aligned threshold inverter (SATI) sense amplifier and an ECL HIT logic are used to realize high-speed operation at the low supply voltage. The performance of the BiCMOS macros is verified using a fabricated test chip     

Phase study on solid fission products,Ba, Sr and Zr in oxide fuel

Behavior of pseudo-fission products (Ba, Sr, and Zr) as oxides in UO₂ has been investigated by means of high-temperature X-ray diffraction and microprobe analysis. Two identifiable compounds were formed as reaction products in the mixed oxides which initially consisted of UO₂, BaO, SrO, and ZrO₂ powder. These compounds were present and were identified crystallographically as (Ba, Sr) ZrO₃ and (Ba, Sr)UO₃ after heat treatment of the powders at 1500°C for 30 min. Both compounds are isostructural with perovskite, CaTiO₃, and the lattice parameters of both (Ba, Sr)ZrO₃ and (Ba, Sr)UO₃ decrease with increasing content of Sr. (Ba, Sr)UO₃ is decomposed almost completely at 1800°C while (Ba, Sr) ZrO₃ is stable up to 2000°C. The behavior of Ba, Sr, and Zr in fuel under irradiation is discussed.     

Awareness of prior success or failure: A critical factor in task performance.

Exp I, with 36 undergraduates, determined the effects of 2 levels of history of success (high or low) and the presence or absence of an audience on task performance. Results show that after prior failure, alone Ss performed significantly better than audience Ss, although after prior success, the performance of alone and audience Ss did not differ. These results counter K. J. Good's (1973) results, since his experiment produced a social facilitation effect after prior success, not after prior failure. Performance differences were probably due to differences in audience awareness. In the present experiment, the audience was presumably unaware; whereas in Good's experiment, the audience was presumably aware of S's prior performance level. Exp II (60 Ss) tested the merits of this explanation. Ss with a history of success or failure performed either alone or in 1 of 2 audience manipulations. Ss were told that the audience was either aware or unaware of their prior performance level. Results support the hypothesis. It is argued than an audience can affect the type of standard that an S uses to evaluate performance and that the quality of an S's performance is a function not only of the criterion but also of S's expectation of meeting the criterion (16 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Anisotropic Crystalline Protein Nanolayers as Multi‐Functional Biointerface for Patterned Co‐Cultures of Adherent and Non‐Adherent Cells in Microfluidic Devices

The spatial arrangement of cells in their microenvironment is known to significantly influence cellular behavior, thus making the control of cellular organization an important parameter of in vitro co‐culture models. However, recent advances in micropatterning co‐culture methods within biochips do not address the simultaneous cultivation of anchorage‐dependent and non‐adherent cells. To address this methodological gap we combine S‐layer technology with microfluidics to pattern co‐cultures to study the cell‐to‐cell and cell‐to‐surface interactions under physiologically relevant conditions. We exploit the unique self‐assembly properties of SbpA and SbsB S‐layers to create an anisotropic protein nanobiointerface on‐chip with spatially‐defined cytophilic (adhesive) and cytophobic (repulsive) properties. While microfluidics control physical parameters such as shear force and flow velocities, our anisotropic protein nanobiointerface regulates the biological aspects of the co‐culture method including biocompatibility, biostability, and affinity to non‐adherent cells. The reliability and reproducibility of our microfluidic co‐culture strategy based on laminar flow patterned protein nanolayers is envisioned to advance in vitro models for biomedical research.     

BER assessment accuracy and promptness in SDH networks

Error monitoring accuracy and promptness of the assessment methodology based on the violation computation of bit interleaved parity (BIP) codes are analysed and compared. It i show that the BIP (24, 801) code outperforms the other codes recommended for the synchronous digital hierarchy.<>