大力发展新型墙体材料促进经济可持续发展

在国家宏观政策的引导和浙江省委、省政府的领导下,经过社会各界10多年的共同努力,全省墙材革新工作取得显著成效.在政策制定、机构建设、产品开发、示范应用及开拓进取方面都取得突破性进展,取得了很好的社会效益和经济效益,为浙江经济社会可持续发展作出了应有的贡献.     

Grain Boundary Sliding in Fatigue of Pure Aluminum

The distributions of plastic strain near grain boundaries induced by fatigue loading were investigatedby the fiducial grid method in pure aluminum specimens, and the resulted grain boundary sliding(GBS) was systematically analysed. The results show that the strain field near a grain boundary isnonuniform. GBS is restricted by the junction of grain boundaries and causes discontinuities of bothdisplacement and strain. A peak value of shear strain was created in short-range area across the grainboundary. GBS plays an important role in cyclic softening and secondary hardening. The control fac-tor of GBS is the relative orientation between two grains and the macro orientation of the grainboundary rather than the ∑ value of the boundary.     

注射成形粘结NdFeB磁体:工艺·性能·应用

综合介绍了几种适于注射成形粘结NdFeB磁体的磁粉制备方法及特点；讨论了粘结剂、改性剂及磁场取向对注射成形NdFeB磁体最终磁性能的影响及其应用市场。在此基础上，指出了今后开展研究工作的方向。     

WC对Cu/WC_P复合材料性能及组织的影响

通过ＷＣ含量对ＷＣ／Ｃｕ复合材料性能的影响，确定了冷压－烧结法制备Ｃｕ／ＷＣ材料的适宜ＷＣ含量为１０ｖｏｌ％左右。并就ＷＣ对该材料组织和再结晶行为的影响进行了有益的探讨。     

The Effect of the Charge Fluctuation of Dust Parti-cles on Ion-acoustic Wave Excited Through Ionization Instability

The effect of the charge fluctuation of dust particles on ion acoustic wave (IAW) excited through ionization instability was investigated. The hydrodynamic equations and linear time-dependent perturbation theory served as the starting point of theory, by which the dispersion relation and growth rate of the IAW were given. By comparing the results with the case of constant dust charges, it was found that the charge fluctuation of dust particles reduces the instability of the wave mode.     

化学镀镍合金在电子工业中的应用

对化学镀镍合金铁工艺和性能特性及其在电子工业中的应有委展现状作了评述。化学镀镍合金具有镀层均匀，适用基材广，结合力高，硬度高，优良的耐磨、耐蚀性，可焊性好和特殊的电磁性能等特性，在电子工业中获得了广泛的应用。文中着重介绍了化学镀镍合金在磁盘、电磁屏蔽、微电路、半导体、连接器及薄膜电阻上的应用情况。这些案例说明，合理应用化学镀镍合金技术，有利于提高电子元器件的质量，降低成本，促进技术进步。     

Relationship between Relaxation Internal Friction Peak at about 200℃(f≈1Hz)and Bainitic Transformation In a CuZnAl Alloy

The present investigation showed that the re-laxation peak at about 200℃ (f≈1Hz) was relatedto bainitic transformation in a CuZnAl alloy.Thepeak decreased when bainite precipitated.Theactivation energy of the peak was the same as theapparent activation energy of bainitic transforma-tion.According to the relations between the peakand the bainitic transformation,the mechanism ofthe peak has been discussed.     

反应烧结法制备MgAlON的合成机理及烧结行为的研究

通过对以Al2 O3、MgO和AlN为起始原料 ,在氮气气氛中反应烧结合成MgAlON材料合成机理的研究发现 :在 12 0 0℃以前 ,MgO与Al2 O3反应生成镁铝尖晶石 ,此后 ,随着温度的升高 ,Al2O3不断向所形成的尖晶石中固溶 ;在 130 0℃以前 ,AlN基本上不参与反应 ,而在更高的温度下 ,AlN开始向尖晶石中固溶形成MgAlON ,约在 15 5 0℃时形成单一的MgAlON相。用热膨胀仪检测了试样的线变化率随温度和时间的变化 ,用最小二乘法回归分析了试样线变化率的实验数据 ,并根据烧结理论对MgAlON材料烧结初期的动力学进行了探讨。结果表明 ,MgAlON材料烧结初期的烧结机理以体积扩散为主     

金属材料中的稀土元素

本文论述了俄罗斯对稀土元素在高强度钢、高温合金、铝合金、镁合金、粉末冶金和磁性材料中的应用及其发展。     

ER流体特性及其研究现状

本文简要介绍了ER流体现象及其力学和电学性能,给出了描述ER流体行为的一般理论,提出了ER流体应用中目前存在的主要问题。