Localized corrosion of (lean) duplex stainless steels in immersion units of urban wastewater treatment plants

With lower alloying cost and higher mechanical properties, lean duplex stainless steels can be an alternative to the more commonly used austenitic stainless steels. However, these alloys are still not the preferred choice, probably due to a lack of field experience. A study was thus initiated in view of defining the limits of use of selected (lean) duplexes for urban wastewater treatment units. The present paper shows the localized corrosion performance of selected lean duplexes in chloride contaminated solutions. The results are compared with austenitic S30403 and S31603 and with the more standard duplexes S82441 and S32205. The effect of welding was also investigated. Exposures in field municipal wastewater plants were conducted for 1 year in low and high chloride content units. The results show that lean duplexes S32101 and S32202 can be used as alternatives to S30403 and S31603 in low chloride electrolytes. At 500 ppm of chloride content, duplex stainless steel S32304 showed better corrosion resistance than S30403 and S31603. For higher chloride contents (1000 ppm and above) the standard duplexes S82441 and S32205 shall be preferred.     

System identification from noisy measurements by using instrumental variables and subspace fitting

This paper considers the estimation of the parameters of a linear discrete-time system from noise-perturbed input and output measurements. The conditions imposed on the system are fairly general. In particular, the input and output noises are allowed to be auto-correlated and they may be cross-correlated as well. The proposed method makes use of an instrumental variable (IV)-vector to produce a covariance matrix that is pre- and postmultiplied by some prechosen weights. The singular vectors of the so-obtained matrix possess complete information on the system parameters. A weighted subspace fitting (WSF) method is then applied to the aforementioned singular vectors to consistently estimate the parameters of the system. The IV-WSF technique suggested herein is noniterative and easy to implement, and has a small computational burden. The asymptotic distribution of its estimation errors is derived and the result is used to motivate the choice of the weighting matrix in the WSF step and also to predict the estimation accuracy. Numerical examples are included to illustrate the performance achievable by the method.This work has been supported by the Swedish Research Council of Engineering Sciences under contract 93-669 and by the Göran Gustafsson Foundation.     

Fully automatic welding of thick-walled pressure vessels by the narrow gap subarc process

The demands for welding of thick-walled pressure vessels are very stringent. The cost of repairing a weld defect deep down in a weld joint could be very high. As submerged arc welding is considered to be a reliable process for both the welding of pressure vessels and other demanding applications, ESAB chose this process when developing their narrow gap welding technique. This two-pass narrow gap process is described together with the welding and control equipment. The welding results using two types of agglomerated fluxes are presented.     

用于便携无线设备的Wireless TrenchTM技术

射频电路设计人员常用的一条经验法则是:有源器件的fT至少应为工作频率的十倍时,现代无线设备中的射频电路才会具有良好的性能.     

Agglomeration and networks in spatial economies

We consider the parallel developments in the economics of agglomeration and the economics of networks. We explore the complementarities between the productivity benefits of agglomeration and those of network linkages, arguing that networks of actors dispersed over space may substitute for agglomerations of actors at a single point.JEL Classification: D20, L14, R30     

Manufacturing method for monolithic dye-sensitised solar cells permitting long-term stable low-power modules

A manufacturing technique for monolithic dye-sensitised solar cells is presented. Encapsulated modules designed for indoor low-power applications have been prepared using industrial methods and equipment. Under certain conditions (light intensity <5000 lx, temperature between –10°C and 50°C, and relative humidity of appr. 50%), the modules have performed well and shown excellent long-term stability. Moreover, modules withstand illumination in combination with storage at 100% relative humidity. However, a certain degradation of the module performance takes place at illuminations exceeding 5000 lx and temperatures exceeding 50°C.     

MODE-type algorithm for estimating damped, undamped, or explosive modes

We propose a new algorithm for estimating the parameters of damped, undamped, or explosive sinusoidal signals. The algorithm resembles the MODE algorithm, which is commonly used for direction of arrival estimation in the array signal processing field. It is derived as a natural approximation to an asymptotically (high-SNR) optimal parameter estimator and has excellent statistical accuracy. Nevertheless, it is computationally simple and easy to implement. Numerical examples are included to illustrate the performance of the proposed method.This work has been supported by the Swedish Research Council for Engineering Sciences (TFR).     

Structure and surface properties of diaminocyclohexane plasma polymer films

Plasma polymers of three isomers of diaminocyclohexane (DACH) were deposited on polyethylene, SiO₂, and mica at 20°C. The deposition rate was measured as a function of plasma density and power; a maximum was observed in the latter function. The deposition rate was highest for the monomer with the highest flow rate. The film refractive index was observed to increase with both power density and the degree of fragmentation in the plasma. Film composition was measured by elementary analysis, and was found to be almost identical for each of the three isomers; a mechanism for the polymerization reaction is proposed. The percentage of primary amino groups decreased with increasing power density and with film thickness. Surface force measurements of the thickness and refractive index agreed well with the corresponding ellipsometry values in dry air, and am adhesive force, independent of power density, was measured. When the film was exposed to water vapor, it swelled considerably and the adhesion was determined by capillary forces. Associated with swelling, at high power, was an extremely regular 2-ply rope pattern of protruding material. © 1993 John Wiley & Sons. Inc.