Endosonographic features of esophageal granular cell tumors

BACKGROUND AND STUDY AIMS: Granular cell tumors of the esophagus are rare tumors. A definite diagnosis is achieved by endoscopic biopsies in only 50% of cases. Endoscopic ultrasonography (EUS) is the best procedure in the evaluation of upper gastrointestinal tract submucosal tumors. The aim of this study was to describe the endosonographic findings of esophageal granular cell tumors. METHODS: From January 1989 to March 1994, 15 patients with 21 granular cell tumors which had negative biopsies were examined by EUS (Olympus GF UM3 or GF UM20,7,5 and 12 MHz). In five cases, the tumor was also studied with a 20 MHz Olympus miniprobe. The final histological diagnoses were obtained by subsequent endoscopic snare resection in 20 cases and surgically in one case. RESULTS: The endosonographic features (with the GF UM3 or GF UM20) of esophageal granular cell tumors were: a) a tumor size of less than 2 cm in 95% of cases; b) an hypoechoic solid pattern in 100% of cases; c) a tumor arising in the inner layers in 95% (second echo-poor layer n=15; third echo-rich layer n=5). In one case, the endosonographic finding was transmural malignant infiltration of the esophageal wall (histologically confirmed). CONCLUSION: When a granular cell tumor of the esophagus is suspected, EUS can show the inner layer location of the tumor and thus contribute to planning the endoscopic resection or follow up. When the tumor also invades the outer layers, EUS can contribute to planning the surgical resection.     

Reactivity of steam in exhaust gas catalysis III. Steam and oxygen/steam conversions of propane on a Pd/Al2O3 catalyst

A 1% Pd catalyst (38% dispersion) was prepared by impregnating a γ-alumina with palladium acetylacetonate dissolved in acetone. The behaviour of this catalyst in oxidation and steam reforming (SR) of propane was investigated. Temperature-programmed reactions of C₃H₈ with O₂ or with O₂ + H₂O were carried out with different stoichiometric ratios S(S =[O₂]/5[C₃H₈]). The conversion profiles of C₃H₈ for the reaction carried out in substoichiometry of O₂ (S < 1) showed two discrete domains of conversion: oxidation at temperatures below 350°C and SR at temperatures above 350°C. The presence of steam in the inlet gases is not necessary for SR to occur: there is sufficient water produced in the oxidation to form H₂ and carbon oxides by this reaction. Contrary to what was observed with Pt, an apparent deactivation between 310 and 385°C could be observed with Pd in oxidation. This is due to a reduction of PdO_x into Pd⁰, which is much less active than the oxide in propane oxidation. Steam added to the reactants inhibits oxidation while it prevents the reduction of PdO_x into Pd⁰. Compared to Pt and to Rh, Pd has a higher thermal resistance: no deactivation occurred after treatment up to 700°C and limited deactivation after treatment up to 900°C, provided that the catalyst is maintained in an oxygen-rich atmosphere during the cooling.     

An Analytical Solution to Circular Touch Mode Capacitor

In this paper, a simple but accurate analytical solution is presented to model the flexion of a circular diaphragm with clamped edges under an uniform load. The touch down effect and the evolution of touch radius are considered in this model, making it useful for touch down capacitor devices such as pressure sensors. This model is then compared to results obtained from Coventor, a finite elements analysis program designed for microelectromechanical systems     

Gluten-free diet induces regression of T-cell activation in the rectal mucosa of patients with celiac disease

OBJECTIVE: An increase in the number of intraepithelial lymphocytes (IEL) in the rectal epithelium of patients with active celiac disease has been described. No data are available about how they vary during a gluten-free diet. The aim of the study was to assess the effect of a gluten-free diet on T-cell activation in the rectal mucosa of adult patients with celiac disease. METHODS: Frozen duodenal and rectal biopsies were available in four celiac patients (one male, three female, mean age 39 yr) both before and after 7 to 24 months on a gluten-free diet. Biopsy samples were stained using monoclonal antibodies directed against CD3, betaF1, TcRdelta1, CD25, and HLADR. Numbers of IEL were estimated by counting the peroxidase-stained cells per 100 epithelial cells. Four patients without histological abnormalities were used as control subjects. RESULTS: In the four patients with active celiac disease but in none of the controls, CD25 was expressed by both duodenal and rectal lamina propria cells and HLADR was expressed by duodenal (4/4) and rectal (2/4) epithelial cells. In addition, two patients with active celiac disease had features of lymphocytic colitis, i.e., >20 IEL per 100 epithelial cells. After a gluten-free diet, the mean number of rectal CD3+ betaF1+ IEL decreased (9% vs 21%) and the expression of CD25 and HLADR was no longer present. These changes mirrored those found in the small intestinal biopsies. CONCLUSION: These results suggest that in celiac disease, gluten-driven T-cell activation is not restricted to the proximal part of the intestine but is present on the whole intestinal length. Assessment of the effectiveness of a gluten-free diet through rectal biopsies warrants investigation, as it could lessen discomfort for patients and prove more cost-effective.     

Transporting Deformations of Face Emotions in the Shape Spaces: A Comparison of Different Approaches

Studying the changes of shape is a common concern in many scientific fields. We address here two problems: (1) quantifying the deformation between two given shapes and (2) transporting this deformation to morph a third shape. These operations can be done with or without point correspondence, depending on the availability of a surface matching algorithm, and on the type of mathematical procedure adopted. In computer vision, the re-targeting of emotions mapped on faces is a common application. We contrast here four different methods used for transporting the deformation toward a target once it was estimated upon the matching of two shapes. These methods come from very different fields such as computational anatomy, computer vision and biology. We used the large diffeomorphic deformation metric mapping and thin plate spline, in order to estimate deformations in a deformational trajectory of a human face experiencing different emotions. Then we use naive transport (NT), linear shift (LS), direct transport (DT) and fanning scheme (FS) to transport the estimated deformations toward four alien faces constituted by 240 homologous points and identifying a triangulation structure of 416 triangles. We used both local and global criteria for evaluating the performance of the 4 methods, e.g., the maintenance of the original deformation. We found DT, LS and FS very effective in recovering the original deformation while NT fails under several aspects in transporting the shape change. As the best method may differ depending on the application, we recommend carefully testing different methods in order to choose the best one for any specific application.

     

Processing and fracture behaviour of hot pressed silicon carbide whisker reinforced alumina

The improvement of mechanical properties of silicon carbide whisker reinforced alumina has been investigated with emphasis on the effects of the whisker type and content, the hot pressing temperature and the influence of an interfacial film between the whisker and the matrix. The introduction of silicon carbide whiskers significantly improves the fracture toughness, flexural strength and creep resistance of polycrystalline alumina.

However, these properties are strongly dependent on the size and morphology of whiskers. Large diameter whiskers generate extensive micro-cracking which leads to a decrease in flexural strength. Also, the presence of carbon-coated SiC whiskers substantially increases the high temperature strain rate by promoting cavitation. A grain boundary glassy phase introduced by the carbon coating was also detected.     

3D MRI of explanted sheep hearts with submillimeter isotropic spatial resolution: comparison between diffusion tensor and structure tensor imaging

Magnetic Resonance Materials in Physics, Biology and Medicine - The aim of the study is to&nbsp;compare structure tensor imaging (STI) with diffusion tensor imaging (DTI) of the sheep heart...     

High Figure of Merit (FOM) of Bragg Modes in Au‐Coated Nanodisk Arrays for Plasmonic Sensing

Gold‐coated nanodisk arrays of nearly micron periodicity are reported that have high figure of merit (FOM) and sensitivity necessary for plasmonic refractometric sensing, with the added benefit of suitability for surface‐enhanced Raman scattering (SERS), large‐scale microfabrication using standard photolithographic techniques and a simple instrumental setup. Gold nanodisk arrays are covered with a gold layer to excite the Bragg modes (BM), which are the propagative surface plasmons localized by the diffraction from the disk array. This generates surface‐guided modes, localized as standing waves, leading to highly confined fields confirmed by a mapping of the SERS intensity and numerical simulations with 3D finite element method. The optimal gold‐coated nanodisk arrays are applied for refractometric sensing in transmission spectroscopy with better performance than nanohole arrays and they are integrated to a 96‐well plate reader for detection of IgY proteins in the nanometer range in PBS. The potential for sensing in biofluids is assessed with IgG detection in 1:1 diluted urine. The structure exhibits a high FOM of up to 46, exceeding the FOM of structures supporting surface plasmon polaritons and comparable to more complex nanostructures, demonstrating that subwavelength features are not necessary for high‐performance plasmonic sensing.     

The active GTP- and ground GDP-liganded states of tubulin are distinguished by the binding of chiral isomers of ethyl 5-amino-2-methyl-1,2-dihydro-3-phenylpyrido[3,4-b]pyrazin-7-yl carbamate

NSC 613862 (S)-(-) and NSC 613863 (R)-(+) are the two chiral isomers of ethyl-5-amino-2-methyl-1,2-dihydro-3-phenylpyrido[3, 4-b]pyrazin-7-yl carbamate. Both compounds bind to tubulin in a region that overlaps the colchicine site. They induce formation of abnormal polymers from purified GTP-Mg-tubulin, the active assembly form of tubulin, in glycerol-free buffer with magnesium [De Ines, C., Leynadier, D., Barasoain, I., Peyrot, V., Garcia, P., Briand, C., Rener, G. A., and Temple, C., Jr. (1994) Cancer Res. 54, 75-84]. In this study, we observed that the S-isomer can promote polymerization of GDP-tubulin, the inactive assembly-incompetent form of tubulin, into nonmicrotubular structures at a critical protein concentration of 1 mg/mL (12 mM MgCl2). Neither the R-isomer nor colchicine have this ability. By electron microscopy, these tubulin polymers showed the same poorly defined filamentous structure when GDP-tubulin or GTP-Mg-tubulin were used. By HPLC measurements, we demonstrated that a dissociated GTP hydrolysis and exchange of nucleotide occurred during the isomer-induced abnormal assembly. Both isomers inhibited the Mg2+-induced tubulin self-association leading to 42 S double ring formation from GTP-Mg-tubulin or GDP-tubulin. Measurement of their binding under nonassociation conditions revealed a 3-fold decrease in the apparent equilibrium binding constant of the R-isomer to GDP-tubulin relative to GTP-Mg-tubulin. For the S-isomer, the decrease in the binding constant was less pronounced. Binding data, analyzed in terms of a system of linked conformational and association equilibria, provide evidence that the active ("straight") rather than the inactive ("curved") conformation of tubulin differentially recognizes these ligands. Whereas binding of colchicine to tubulin is well-known to induce GTP hydrolysis, this is the first case in which the interaction of a ligand with the colchicine site is shown to be sensitive to the presence of GDP or GTP at the distant nucleotide binding site.