Mathematical modelling and numerical simulation of ordered porosity metal materials formation

Ordered porosity metal materials belong to a relatively new class of porous materials named gasars. This paper presents a mathematical model of the complex physical phenomena in the production of gasars. Analyses for heat transfer, solidification kinetics and gas diffusion were coupled to describe the formation of unique gasar structure. Several criterial functions were introduced to provide significant quantitative information about the relationship between the operating technological parameters and the final structure. The computational outcomes of the numerical simulation were compared with the characteristics of real gasar ingots. The model was applied to determine the boundary conditions that would provide approximately constant physical conditions on the solidification front. The structure sensitiveness of gasars with respect to the different technological parameters is discussed.     

Effect of oxygen deficiency (δ) on transition temperature of yttrium cuprate superconductors

The nature of pairing mechanism as well as transition temperature of yttrium cuprates is discussed using the strong coupling theory. An interaction potential has been developed for the layered structure with two conducting CuO₂(a–b) layers in a unit cell. The interaction potential properly takes care of electron-electron, electron-phonon and electron-plasmon interactions. Furthermore, the electron-phonon coupling parameter (λ), the modified Coulomb repulsive parameter (μ*) and the 2D acoustic phonon (plasmon) energy as a function of oxygen deficiency is worked out. Finally, the superconducting transition temperature (T _c) is then evaluated by using these coupling parameters and obtainedT _c = 95(92)K for Y(Yb)Ba₂Cu₃O_7−δ superconductors withδ = 0·0. The model parameters estimated from the layered structure approach are consistent with the strong coupling theory. The result deduced on the variation ofT _c withδ are in fair agreement with the earlier reported data on yttrium cuprates. The analysis of the above results are discussed.     

A Monte Carlo simulation study of the mechanical and conformational properties of networks of helical polymers. I. General concepts

We study the mechanical and conformational properties of networks of helical polymers with a combination of Monte Carlo simulations based on the Wang-Landau algorithm and the three-chain model. We find that the stress-strain behavior of these networks has novel features not observed in typical networks made of synthetic polymers. In particular, we find that as these networks are stretched they first strengthen, then soften and finally strengthen again. This non-monotonic behavior of the stress correlates with the one of the helical content and is rationalized by the elongation-induced formation and melting of the helical structure of the polymer. We complement these results with a study of other conformational properties of the polymer strands that clarify the molecular mechanisms behind the mechanical behavior of these networks. Finally, we present a qualitative comparison of some of our results with the theoretical ones recently reported by Kutter and Terentjev.     

Target Location Estimation in Sensor Networks With Quantized Data

A signal intensity based maximum-likelihood (ML) target location estimator that uses quantized data is proposed for wireless sensor networks (WSNs). The signal intensity received at local sensors is assumed to be inversely proportional to the square of the distance from the target. The ML estimator and its corresponding Crameacuter-Rao lower bound (CRLB) are derived. Simulation results show that this estimator is much more accurate than the heuristic weighted average methods, and it can reach the CRLB even with a relatively small amount of data. In addition, the optimal design method for quantization thresholds, as well as two heuristic design methods, are presented. The heuristic design methods, which require minimum prior information about the system, prove to be very robust under various situations     

CO2 laser annealing of plasma-deposited high-Tcsuperconducting thick films

Recent advances in the fabrication of high-T _c superconducting thick films demand processing techniques which can eliminate film/substrate interdifiusion that occurs during subsequent post-annealing heat treatment after the film is deposited, thereby limiting the application of the thick films for devices. The present study evaluates laser annealing techniques for plasma-deposited Y-Ba-Cu-O thick films using a high-energy CO₂ laser (10.6m) in a continuous wave mode. The results are compared with those obtained by conventional furnace annealing techniques necessary for post-heat treatment of as-deposited superconducting thick films. The high-T _c superconducting phase is recovered by cationic diffusion during subsequent post-annealing heat treatment. Crystallographic phases and microstructural characterization have been performed using XRD, SEM, and EPMA analytical techniques. The significance of the technology lies in the elimination of film/substrate interdiffusion problems, thereby resulting in high-quality superconducting thick films. The technology will significantly reduce the post-annealing times usually required by conventional furnace annealing techniques.     

Particle distribution control in cast aluminium alloy-mica composites

A suspension of mica particles (40m diameter and 3.7 thick) obtained in a mechanically stirred Al-4 wt % Cu-1.5 wt % Mg melt was poured and solidified in a variety of moulds under different heat flow configurations. The resulting cast structure showed a non-uniform distribution of dispersed mica particles with mica-depleted and segregated zones due to their flotation before and during solidification. The experimentally observed profiles of mica-free regions deviate significantly from those computed on the basis of Stokes's law and freezing-time computations. In relatively thick castings, segregation of mica could be minimized by using low pouring temperatures and/or side as well as bottom chilling. It was found, however, that thin castings (12.5 mm) could easily be produced with a homogeneous distribution of mica particles.     

Hexamethyl cyclotrisiloxane–styrene block copolymers and their chemical composition

Triblock copolymers of hexamethyl cyclotrisiloxane (D₃) and styrene were synthesized by first preparing “living” species of polystyrene dianion followed by polymerization of D₃. The chain lenght of polymeric blocks could be controlled in a predictable fashion leading to a central hard block of polystyrene and the two end segments of amorphous polydimethylsiloxane having narrow molecular weight distribution, were characterized by gel permeation chromatography. The chemical composition of block copolymers was determined by silicon analysis and infrared and nuclear magnetic resonance spectra. Thermal aging of block copolymers at 150, 200, and 300°C was also discussed.     

Fabrication and characterization of electrospun psyllium husk-based nanofibers for tissue regeneration

The present study reports for first time the blending of psyllium husk (PH) powder/gelatin (G) in the polymer-rich composition of polyvinyl alcohol (PVA) to make an electrospinnable solution. The composite was prepared in 3 different ratios viz., 100% (wt/wt) (PVA + PH), 75% + 25% (PVA + 75PH + 25G) (wt/wt) and 50% + 50% (PVA + 50PH + 50G) (wt/wt) in 6% PVA solution. Optimum electrospinning parameters were evaluated for all the prepared blends. The fabricated nanofibers were characterized by scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared, differential scanning calorimetry, porosity percentage, and fiber orientation using ImageJ software. A qualitative in vitro degradation study at room temperature is supported by SEM images. The cellular interactions were characterized by MTT assay of NIH-3T3 fibroblast cells for 2 and 4 days with an optimum cell growth of >50% by fourth day of culture and long-term cultivation of L929-RFP cells was observed for 10 days. The nanofibers were formed in the range of 49–600 nm. PVA + 75PH + 25G when cultured with L929-RFP cells exhibited highest fluorescence intensity and thus supported cellular proliferation significantly. Based on the results obtained from various analyses, we anticipate that fabricated psyllium-based nanofiber can be used as a promising candidate for wound healing and other biomedical applications.