钛白粉副产物硫酸亚铁生产硫酸铵和氧化铁红的研究

以硫酸法钛白粉副产物绿矾为原料 ,生产硫酸铵和铁红粉 .用含臭氧 ( 5 0 0mg/h)的空气在5 0℃将FeCO3氧化成Fe2 O3·nH2 O .通过煅烧制铁红产品 ,其质量达HO0 1 - 0 2 一级品要求 ;硫酸铵通过净化、除杂、浓缩、结晶 ,生产一级品硫铵 .实验证明 ,本工艺氧化时间短 ,产品质量稳定     

TEM method for rapid and precise evaluation of continuous recrystallization

With the aid of a double-tilt holder in a transmission electron microscope, a new method for a rapid and precise determination of the misorientations of a large number of subgrain or grain boundaries is given in this article. By use of the method, the continuous recrystallization can be rapidly and precisely evaluated when compared to the other conventional methods.     

Effect of polymerization conditions on o‐phenylenediamine and o‐phenetidine oxidative copolymers

A series of new o‐phenylenediamine (OPD)/o‐phenetidine (PHT) copolymers with partly phenazine‐like structures has been successfully synthesized at three polymerization temperatures by chemically oxidative polymerization in four different polymerization media. The molecular structures and properties of the resulting OPD/PHT polymers were investigated by IR, UV–vis and high‐resolution ¹H NMR spectroscopies, and DSC, in order to ascertain the effect of reaction temperature, comonomer ratio and acid medium. The copolymerization mechanism of OPD with PHT monomers has been proposed. It is found that the statistical OPD/PHT copolymer obtained at a temperature of 118 °C has a higher degree of polymerization than that obtained at 12–17 °C. The OPD content in the copolymers calculated from NMR spectroscopic analysis is higher than that in the feed OPD content, whereas the OPD content calculated from element analysis is slightly lower than the feed OPD content. It can be predicted that denitrogenation takes place in the OPD units during the polymerization process at OPD/PHT molar ratios of 90/10 and 100/0. These OPD/PHT copolymers exhibit a much better solubility than the OPD homopolymer, hence suggesting an incorporation of PHT units into the phenazine structure of the homopolymer. The thermal behavior of the copolymers was also studied. Copyright © 2004 Society of Chemical Industry     

Synthesis and aqueous solution behaviors of sodium sulfonate‐terminated dendritic poly(ester‐amine)

Sodium sulfonate‐terminated dendritic poly(ester‐amine) (SPEA) was synthesized by sulfonation of acrylic double bond‐terminated dendritic poly(ester‐amine) (APEA) with sodium hydrogen sulfite (NaHSO₃) in mixture of diglycol and 2‐butanone under normal pressure. The structure of SPEA was characterized by IR, ¹H‐NMR, and elemental analysis. SPEA was water‐soluble. 1.0–40.0% (mass) SPEA aqueous solutions appeared as dilatant fluid. When pH value varied from 1.5 to 12.0, the viscosity of 1–5% (mass) SPEA aqueous solutions changed very small, and the electric conductivity almost kept stable within pH 3.0–10.0. The relationship between the viscosity and the concentration of SPEA water solutions was similar to that of NaCl water solutions. The surface tension of SPEA water solutions was lower than that of polyethylene glycol 2000 water solutions with the same concentration. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Study on phase behavior–impact strength relationship of unsaturated polyester/polyurethane hybrid polymer network

The phase behavior of a hybrid polymer network (HPN) composed of poly[(propylene glycol maleate)-co-(propylene glycol phthalate)] crosslinked with styrene and polyester–urethane crosslinked with methylene-bis-ortho-chloroaniline was examined. The correlation between phase separation and impact strength of the HPNs is discussed. The composition of HPNs has an effect on their properties.     

新型高性能脉冲峰值保持电路

本文介绍了两种新型跨导型脉冲峰值保持器，分别用于多丝正比室（ＭＷＰＣ）和复合晶体闪烁探测器（Ｐｈｏｓｗｉｃｈ）输出脉冲信号的形状和幅度分析。电路的跨导放大级采用跨导型集成运算放大器，使电路结构简单化，且性能优良可靠，能响应输入脉冲最小上升时间分别为５０ｎｓ（Ｐｈｏｓｗｉｃｈ）和５００ｎｓ（ＭＷＰＣ）的信号，在４０ｄＢ的动态范围内，两电路的积分非线性均好于０．１％，特别适用于空间γ射线观测。     

文科《多媒体技术与应用》课程设置与教学研究

多媒体技术是以数字技术为基础的综合技术。本文结合文科学生的特点,探讨了《多媒体技术与应用》课程设置与教学。     

Cationic ring-opening polymerization of 2-phenyl-1,3,6,2-trioxaphosphocane

Summary The ring-opening polymerization of 2-phenyl-1,3,-6,2-trioxaphosphocane (4), an eight-membered cyclic phosphonite, has been investigated. Cationic initiators of PhCH₂-Cl and MeOTf gave polymers, whereas anionic and radical initiators did not yield polymer. The structure of polymer was examined by IR, ¹H, ³¹P, and ³¹C NMR spectroscopy of polymers and elemental analysis as well as the alkaline hydrolysis products. The polymer consisted of two different units, i.e., the major part is the normal phosphinate structure 5 and the minor part is the isomerized unit 6 in 7% with PhCH₂Cl initiation and in 34% with MeOTf initiator. The difference in nature of propagating species from these two initiators are discussed in connection with their reactivities.On leave from the Institute of Chemistry, Academia Sinica, Beijing, China     

Polyesterification and isomerization of maleic anhydride and 1,6-hexane diol as studied by 1H and 13C n.m.r.

The polyesterification and isomerization reaction of 1,6-hexane diol and maleic anydride in a melt without catalyst was studied by ¹³C and ¹H n.m.r. spectroscopy. The structure and concentration of oligoester species during the polyesterification and isomerization were determined depending on the reaction temperature and time. According to the number and configuration of repeating units determined from ¹H n.m.r. spectra kinetics of both reactions were also considered. The degree of isomerization is continuously increasing in the investigated reaction range.     

单束纤维增强树脂基复合材料的热水老化性能研究

在96℃水中,对开芙拉29(Kevlar29),开芙拉49(Kevlar49)和聚苯撑苯并唑(PBO)纤维束增强的环氧树脂和双马树脂基复合材料进行老化实验后,再在60℃下进行干燥脱水处理。实验测定了吸水和脱水阶段的含水率及热水老化试样和干燥试样的弯曲性能。结果表明:在热水作用下,复合材料的弯曲强度和模量随热水老化时间的延长呈下降趋势,纤维与树脂基体间的界面发生破坏;再干燥脱水后,材料的弯曲强度和模量恢复,但仍低于未老化试样的性能,纤维与树脂基体间的界面破坏情况也类似。