Ultrafast IR Laser Writing of Strong Bragg Gratings Through the Coating of High Ge-Doped Optical Fibers

Strong fiber Bragg gratings were written through the standard polymer coatings of "off-the-shelf" high numerical aperture single-mode optical fibers after a few seconds exposure with femtosecond pulse durations of infrared radiation through a phase mask. While writing through the acrylate coating, we obtained index modulations of up to 1.4 x 10^-3 and 7 x 10^-4 with and without H₂ -loading, respectively.     

Coupling GIS with Hydrologic and Hydraulic Flood Modelling

Geographic Information Systems (GIS) have been recognised as a powerful means to integrate and analyse data from various sources in the context of comprehensive floodplain management. As part of this comprehensive approach to floodplain management, it is very important to be able to predict the consequences of different scenarios in terms of flooded areas and associated risk. Hydrologic and hydraulic modelling plays a crucial role and there is much to gain in incorporating these modelling capabilities in GIS. This is still a rather complex task and research is being done on the full integration of these models. Interfacing between these models and GIS may be a very efficient way of overcoming the difficulties and getting very good results in terms of engineering practice. This paper presents results based on the use of Intergraph GIS coupled with Idrisi GIS. Using these two systems substantially increased the flexibility of using GIS as a tool for flood studies. A lumped (XSRAIN) and a distributed (OMEGA) hydrologic models were used to simulate flood hydrographs. The well known HEC-2 Hydraulic model was used to compute flooded areas. These models were applied in the Livramento catchment with very good results. The computation of flooded areas for different flood scenarios, and its representation in GIS, can be used in the assessment of affected property and associated damages. This is a very useful GIS-based approach to floodplain management.     

Correlation between synthesis conditions, coherently diffracting domain size and cubic phase stabilization in barium titanate

The Constant Rate Thermal Analysis method has been used under different experimental conditions to obtain barium titanate powder of very small grain size. Both a crystallographic and a dielectric study ham been carried out on samples sintered at different temperatures. It is deduced that the formation of small coherently diffracting domains is improved by the generation of oxygen vacancies and the cubic phase stabilization depends on the coherently diffracting domain size rather than on the particle size.     

Two distinct DNA ligase activities in mitotic extracts of the yeast Saccharomyces cerevisiae

Four biochemically distinct DNA ligases have been identified in mammalian cells. One of these enzymes, DNA ligase I, is functionally homologous to the DNA ligase encoded by the Saccharomyces cerevisiae CDC9 gene. Cdc9 DNA ligase has been assumed to be the only species of DNA ligase in this organism. In the present study we have identified a second DNA ligase activity in mitotic extracts of S. cerevisiae with chromatographic properties different from Cdc9 DNA ligase, which is the major DNA joining activity. This minor DNA joining activity, which contributes 5-10% of the total cellular DNA joining activity, forms a 90 kDa enzyme-adenylate intermediate which, unlike the Cdc9 enzyme-adenylate intermediate, reacts with an oligo (pdT)/poly (rA) substrate. The levels of the minor DNA joining activity are not altered by mutation or by overexpression of the CDC9 gene. Furthermore, the 90 kDa polypeptide is not recognized by a Cdc9 antiserum. Since this minor species does not appear to be a modified form of Cdc9 DNA ligase, it has been designated as S. cerevisiae DNA ligase II. Based on the similarities in polynucleotide substrate specificity, this enzyme may be the functional homolog of mammalian DNA ligase III or IV.     

Augmented rectangular load flow model

This paper presents some improvements to the load flow solution in rectangular coordinates. First, in an attempt to use as linear a model as possible, both the nodal equations and the bus constraints are retained. The Newton-Raphson (NR) method is then applied to the enlarged set of equations, and written in terms of bus voltages and currents. This scheme, combined with a simple procedure to handle PV buses, leads to a computationally efficient algorithm, particularly advantageous in the presence of zero-injection buses. Experimental results are provided comparing the performance of the proposed approach with that of the conventional formulation     

Nonlinear distortion generated by DSF-based optical-phase conjugators in analog optical systems

In this paper, the nonlinear distortion induced by dispersion-shifted-fiber-based optical-phase conjugators (OPCs) in intensity-modulated subcarrier multiplexing optical systems is evaluated. In this study, it is shown that the nonlinear distortion mainly arises from the four-wave mixing (FWM) process during the phase conjugation, although there also exists influences from other nonlinear effects. Closed expressions for calculating the second- and third-order harmonic distortions due to FWM, self-phase modulation, cross-phase modulation and group-velocity dispersion effects in the dispersion-shifted-fiber-based OPC are also reported for the first time. The influence of several system design parameters, such as the optical modulation index, the number of channels, the input optical powers, and the effective area of the dispersion-shifted fiber on the compensation of fiber-induced nonlinear distortions employing the optical-phase conjugation technique, is considered.     

Ecophysiology of ochratoxigenic Aspergillus ochraceus and Penicillium verrucosum isolates. Predictive models for fungal spoilage prevention - a review

Ochratoxin A (OTA) is a secondary metabolite produced by several species of Aspergillus and Penicillium; among them Aspergillus ochraceus and Penicillium verrucosum are two ochratoxigenic species capable of growing in different climates and thus contamination of food crops with OTA can occur worldwide. OTA can be found in a wide range of foods such as cereals, coffee, cocoa, spices, beer, wine, dried vine fruit, grapes and meat products. OTA is toxic to animals, it presents neurotoxic, immunotoxic and nephrotoxic effects. It has been implicated in a human kidney disorder known as Balkan Endemic Nephropathy. This review focuses on the ecophysiology of ochratoxin-producing Aspergillus ochraceus and Penicillium verrucosum, the effect of environmental factors on their germination, mycelial growth, and OTA production. Knowledge of environmental conditions required for sucessive stages of fungal development represent the first step towards preventing mycotoxin formation. Predictive models for different stages of fungal development are presented, which allow prediction of the time before spoilage as a function of the abiotic factors. Finally, the implications of these studies in management of barley, coffee and grapes are described. This can help to identify the critical control points in their production, storage and distribution processes.     

Fractionation and characterisation for antioxidant activity of hydrolysed whey protein

Whey protein isolate (WPI) was hydrolysed for 1 h using Alcalase, Protamex and Flavourzyme. Native WPI, hydrolysed WPI and two commercial WPI hydrolysates were subjected to fractionation by size exclusion chromatography. Antioxidant activity of WPI fractions was measured with a liposome‐oxidising system (50 µM FeCl₃/0.1 µM ascorbate, pH 7.0). Lipid oxidation was measured as thiobarbituric acid‐reactive substances (TBARS). Gel electrophoresis and amino acid analysis were run to identify the peptide composition. The influence of amino acid composition on antioxidant activity was evaluated using multivariate analysis methods (correlation analysis, principal component analysis, multiple linear regression and discriminant analysis). TBARS assays indicated the presence of antioxidant activity in all protein fractions, including non‐hydrolysed WPI. For native and hydrolysed WPI samples the first fraction (> 45 kDa) showed a higher TBARS inhibition effect (24–27%) when compared with lower‐molecular‐weight fractions and hydrolysate mixtures. In contrast, for commercial WPI hydrolysates a higher inhibitory effect was found in most of the lower‐molecular‐weight fractions (30–55%). The ability of WPI fractions to delay lipid oxidation was found to be related to the prevalence of histidine and hydrophobic amino acids. Copyright © 2004 Society of Chemical Industry     

An effect of side chain length on the solution structure of poly(9,9-dialkylfluorene)s in toluene

The effect of side chain length of π-conjugated poly(9,9-dialkylfluorene)s has been studied in semi-dilute (10 mg/mL) toluene solutions using small-angle neutron scattering (SANS) and ¹H and ²H NMR spectroscopies. Under these conditions, SANS data indicate that poly(9,9-dinonylfluorene) and poly(9,9-dioctylfluorene) are dissolved down to the molecule level and appear as elongated one-dimensional chains (length >20-30 nm). In contrast, the shorter side chain polymers exhibit a self-association so that poly(9,9-diheptylfluorene) forms thin sheet-like (∼1 nm) and poly(9,9-dihexylfluorene) thin (∼1 nm) and thick sheet-like (>6 nm) aggregates. ¹H NMR data, together with the density functional theory (DFT) calculations, however, show that this occurs without changes in the conformation of the polymer backbone.