On methods of defuzzification of parametrically represented fuzzy numbers

A comparative analysis of such methods of defuzzification of fuzzy numbers as WABL (Weighted Averaging Based on Levels), centroid, and mean of maxima (MOM) is presented in the study. Analytic formulas are presented for calculating the defuzzification values for parametrically represented fuzzy numbers of triangular and trapezoidal form.     

ADALINE based robust control in robotics: a Riemann-Liouville fractional differintegration based learning scheme

This paper presents an approach to improve the performance of intelligent sliding model control achieved by the use of a fundamental constituent of soft computing, named Adaptive Linear Element (ADALINE). The proposed scheme is based on the fractional calculus. A previously considered tuning scheme is revised according to the rules of fractional order differintegration. After a comparison with the integer order counterpart, it is seen that the control system with the proposed adaptation scheme provides (1) better tracking performance, (2) suppression of undesired drifts in parameter evolution and (3) a very high degree of robustness and insensitivity to disturbances. The claims are justified through some simulations utilizing the dynamic model of a two degrees of freedom (DOF) direct drive robot arm and overall, the contribution of the paper is to introduce the fractional order calculus into a robust and nonlinear control problem with some outperforming features that are absent when the integer order differintegration operators are adopted.     

Control of underactuated planar pronking through an embedded spring-mass Hopper template

Autonomous use of legged robots in unstructured, outdoor settings requires dynamically dexterous behaviors to achieve sufficient speed and agility without overly complex and fragile mechanics and actuation. Among such behaviors is the relatively under-studied pronking (aka. stotting), a dynamic gait in which all legs are used in synchrony, usually resulting in relatively slow speeds but long flight phases and large jumping heights. Instantiations of this gait for robotic systems have been mostly limited to open-loop strategies, suffering from severe pitch instability for underactuated designs due to the lack of active feedback. However, both the kinematic simplicity of this gait and its dynamic nature suggest that the Spring-Loaded Inverted Pendulum model (SLIP) would be a good basis for the implementation of a more robust feedback controller for pronking. In this paper, we describe how template-based control, a controller structure based on the embedding of a simple dynamical “template” within a more complex “anchor” system, can be used to achieve very stable pronking for a planar, underactuated hexapod robot. In this context, high-level control of the gait is regulated through speed and height commands to the SLIP template, while the embedding controller ensures the stability of the remaining degrees of freedom. We use simulation studies to show that unlike existing open-loop alternatives, the resulting control structure provides explicit gait control authority and significant robustness against sensor and actuator noise.     

An assessment of total RMR classification system using unified simulation model based on artificial neural networks

Engineering design has great importance in the cost and safety of engineering structures. Rock mass rating (RMR) system has become a reliable and widespread pre-design system for its ease of use and variety in engineering applications such as tunnels, foundations, and slopes. In RMR system, six parameters are employed in classifying a rock mass: uniaxial compressive strength of intact rock material (UCS), rock quality designation (RQD), spacing of discontinuities (SD), condition of discontinuities (CD), condition of groundwater (CG), and orientation of discontinuities (OD). The ratings of the first three parameters UCS, RQD, and SD are determined via graphic readings where the last three parameters CD, CG, and OD are estimated by the tables that are composed of interval valued linguistic expressions. Because of these linguistic expresions, the estimated rating values of the last three become fuzzy especially when the related conditions are close to border of any two classes. In such cases, these fuzzy situations could lead up incorrect rock class estimations. In this study, an empirical database based on the linguistic expressions for CD, CG, and OD is developed for training Artificial Neural Network (ANN) classifiers. The results obtained from graphical readings and ANN classifiers are unified in a simulation model (USM). The data obtained from five different tunnels, which were excavated for derivation purpose, are used to evaluate classification results of conventional method and proposed model. Finally, it is noted that more accurate and realistic ratings are reached by means of proposed model.     

Improved assignment with ant colony optimization for multi-target tracking

Detecting and tracking ground targets is crucial in military intelligence in battlefield surveillance. Once targets have been detected, the system used can proceed to track them where tracking can be done using Ground Moving Target Indicator (GMTI) type indicators that can observe objects moving in the area of interest. However, when targets move close to each other in formation as a convoy, then the problem of assigning measurements to targets has to be addressed first, as it is an important step in target tracking. With the increasing computational power, it became possible to use more complex association logic in tracking algorithms. Although its optimal solution can be proved to be an NP hard problem, the multidimensional assignment enjoyed a renewed interest mostly due to Lagrangian relaxation approaches to its solution. Recently, it has been reported that randomized heuristic approaches surpassed the performance of Lagrangian relaxation algorithm especially in dense problems. In this paper, impelled from the success of randomized heuristic methods, we investigate a different stochastic approach, namely, the biologically inspired ant colony optimization to solve the NP hard multidimensional assignment problem for tracking multiple ground targets.     

Parallel force measurement with a polymeric microbeam array using an optical microscope and micromanipulator

An image analysis method and its validation are presented for tracking the displacements of parallel mechanical force sensors. Force is measured using a combination of beam theory, optical microscopy, and image analysis. The primary instrument is a calibrated polymeric microbeam array mounted on a micromanipulator with the intended purpose of measuring traction forces on cell cultures or cell arrays. One application is the testing of hypotheses involving cellular mechanotransduction mechanisms. An Otsu-based image analysis code calculates displacement and force on cellular or other soft structures by using edge detection and image subtraction on digitally captured optical microscopy images. Forces as small as 250+/-50 nN and as great as 25+/-2.5 microN may be applied and measured upon as few as one or as many as hundreds of structures in parallel. A validation of the method is provided by comparing results from a rigid glass surface and a compliant polymeric surface.     

An adaptive signal compression system with pre-specified reconstruction quality and compression rate

Two essential properties of a signal compression method are the compression rate and the distance between the original signal and the reconstruction from the compressed signal. These two properties are used to assess the performance and quality of the method. In a recent work [B. Tümer, B. Demir?z, Lecture Notes in Computer Science-Computer and Information Sciences, volume 2869, chapter Signal Compression Using Growing Cell Structures: A Transformational Approach, Springer Verlag, 2003, pp. 952-959], an adaptive signal compression system (ACS) is presented which defines the performance of the system as a function of the system complexity, system sensitivity and data size. For a compression method, it is desirable to formulate the performance of the system as a function of the system complexity and sensitivity to optimize the performance of the system. It would be further desirable to express the reconstruction quality in terms of the same system parameters so as to know up front what compression rate to end up with for a specific reconstruction quality. In this work, we modify ACS such that the modified ACS (MACS) estimates the reconstruction quality for a given system complexity and sensitivity. Once this relation is identified it is possible to optimize either compression rate or reconstruction quality with respect to system sensitivity and system complexity while limiting the other one.     

Variable structure control of a class of uncertain systems

This brief paper proposes a method for tuning the parameters of a variable structure controller. The approach presented extracts the error at the output of the controller and applies a nonlinear tuning law using this error measure. The adaptation mechanism drives the state tracking error vector to the sliding hypersurface and maintains the sliding mode. In the simulations, the approach presented has been tested on the control of Duffing oscillator and the analytical claims have been justified under the existence of measurement noise, uncertainty and large nonzero initial errors.     

Active node determination for correlated data gathering in wireless sensor networks

In wireless sensor network applications where data gathered by different sensor nodes is correlated, not all sensor nodes need to be active for the wireless sensor network to be functional. Given that the sensor nodes that are selected as active form a connected wireless network, the inactive sensor nodes can be turned off. Allowing some sensor nodes to be active and some sensor nodes inactive interchangably during the lifecycle of the application helps the wireless sensor network to have a longer lifetime. The problem of determining a set of active sensor nodes in a correlated data environment for a fully operational wireless sensor network can be formulated as an instance of the connected correlation-dominating set problem. In this work, our contribution is twofold; we propose an effective and runtime-efficient iterative improvement heuristic to solve the active sensor node determination problem, and a benefit function that aims to minimize the number of active sensor nodes while maximizing the residual energy levels of the selected active sensor nodes. Extensive simulations we performed show that the proposed approach achieves a good performance in terms of both network lifetime and runtime efficiency.     

Rheological,Thermodynamic, and Gas Solubility Properties of Phenylacetic Acid‐Based Deep Eutectic Solvents

Choline chloride + phenylacetic acid‐based deep eutectic solvents are studied. Their most relevant experimental physicochemical properties at different mixing ratios together with the CO₂ solubility data obtained in wide pressure and temperature ranges are reported. The presented materials exhibit a significant CO₂ capture performance with low corrosion effect when compared with the most common amine‐based CO₂ capture agents. Detailed rheological measurements are carried out and various models are applied to describe the dynamic flow behavior of the solvents. The CO₂ absorption mechanism is evaluated by studying the behavior of the liquid gas and interface. Due to the advantages of low cost, nontoxicity, and favorable physical properties, these solvents are an environmentally promising alternative for effective CO₂ capture technological applications.