Properties of poly(ethylene terephthalate)–poly(ethylene naphthalene 2,6‐dicarboxylate) blends with montmorillonite clay

The production and properties of blends of poly(ethylene terephthalate) (PET) and poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) with three modified clays are reported. Octadecylammonium chloride and maleic anhydride (MAH) are used to modify the surface of the montmorillonite–Na⁺ clay particles (clay–Na⁺) to produce clay–C18 and clay–MAH, respectively, before they are mixed with the PET/PEN system. The transesterification degree, hydrophobicity and the effect of the clays on the mechanical, rheological and thermal properties are analysed. The PET–PEN/clay–C18 system does not show any improvements in the mechanical properties, which is attributed to poor exfoliation. On the other hand, in the PET–PEN/clay–MAH blends, the modified clay restricts crystallization of the matrix, as evidenced in the low value of the crystallization enthalpy. The process‐induced PET–PEN transesterification reaction is affected by the clay particles. Clay–C18 induces the largest proportion of naphthalate–ethylene–terephthalate (NET) blocks, as opposed to clay–Na⁺ which renders the lowest proportion. The clay readily incorporates in the bulk polymer, but receding contact‐angle measurements reveal a small influence of the particles on the surface properties of the sample. The clay–Na⁺ blend shows a predominant solid‐like behaviour, as evidenced by the magnitude of the storage modulus in the low‐frequency range, which reflects a high entanglement density and a substantial degree of polymer–particle interactions. Copyright © 2005 Society of Chemical Industry     

Red-green colour blindness in the Tormes-Alberche Valley (Avila-Central Spain)

A population from a Central Spanish region (Tormes-Alberche Valley) has been investigated for the presence of red-green colour vision defects. A sample of 998 subjects (469 male and 529 female) was analyzed. To identify colour vision defects, Ishihara test plates were used. The red-green colour blindness percentage obtained was 4.69 +/- 0.976% for males (2.13% protan and 2.56% deutan types) and none of the females tested were found to be colour blind. These results are within the variation range of Mediterranean populations and lower than the usual frequencies among non-Mediterranean European samples.     

Spectral domain analysis of conductor losses in a multiconductorsystem via the incremental inductance rule

Spectral domain analysis is adapted to analyse the conductor losses of a multiconductor system embedded in a multilayered medium using a quasi-TEM approach and assuming a strong skin effect. After adapting the incremental rule to a multiconductor system, the conductor losses are computed in terms of the derivative of the inductance matrix     

Analysis of the propagation of leaky magnetostatic modes in normally magnetized microstrip and slot lines

The propagation of leaky forward magnetostatic (MS) volume waves along ferrite-loaded microstrip and slot lines is analyzed. This phenomenon is studied by means of a numerical approach based on the residue calculus technique because of its good numerical convergence and stability. The proposed method allows for a quick and accurate computation of the phase and attenuation constants of the leaky MS modes. A comparative analysis between both microstrip lines and slot lines is carried out, and some new physical effects, such as MS resonances in the radiation loss, are reported. The advantages of the proposed method of analysis over other numerical methods, such as Galerkin's or moment methods, are also discussed.     

Fundamental properties of radiation from a leaky mode excited on a planar transmission line

By using a specific normalization, it is shown that the TM/sub 0/ radiation field from a leaky mode that is excited by a source on any printed-circuit structure can be represented in a unified manner. The general properties of the normalized leaky-mode radiation field are examined in detail for a variety of phase and attenuation constants, as well as distances from the source, and for different types of source excitations. The normalized leaky-mode radiation field is compared to similarly normalized geometrical-optics and far-field radiation expressions to provide further insight into the nature of the radiation fields in the near- and far-field regions. The results provide a general view of leaky-mode radiation properties independent of the type of planar transmission line or background structure.     

Evaluation of the antimicrobial action of honey against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, Escherichia coli, Salmonella enteritidis, Listeria monocytogenes and Aspergillus niger. Evaluation of its microbiological charge

The evaluation of the microbiological charge present in Costa Rican samples as the evaluation of its antimicrobial activity over different microorganisms, including those associated to wound infections, will allow to emit criteria referred to its use in therapeutic treatments, specially as alternative therapy for cases involving antibiotic resistant bacteria. The microbiological charge of 25 honey samples, acquired in Costa Rican markets was evaluated through several indicators including total plate aerobic count, total plate anaerobic count, total aerobic spore count, total anaerobic spore count and molds and yeast count. Also, samples were inoculated in tubes with chopped meat media and plated in egg yolk agar in order to determine the presence of Clostridium botulinum. For the antimicrobial activity evaluation, the diffusion method in Muller Hinton agar was performed, testing different honey concentrations (100, 75, 50, 25, 12,5 and 6,25 % v/v) against Staphylococcus aureus (ATCC 25923), Staphylococcus epidermidis (UCR 2902), Pseudomonas aeruginosa (ATCC 9027), Escherichia coli (ATCC25922), Salmonella enteritidis (ATCC 13076), Listeria monocytogenes (ATCC 19116) and Aspergillus niger. The results obtained for the microbiological characterization of honey show that 91% of samples had counts equal or lower than 1,0 x 10(1) CFU/g. No positive result was obtained for the isolation of C. botulinum. 24 of the samples analyzed inhibited the growth of S. aureus even in a 25% v/v concentration, nevertheless, A. niger was no inhibited by any of the samples tested.     

Finding an Euclidean anti--centrum location of a set of points

An obnoxious facility is to be located inside a polygonal region of the plane, maximizing the sum of the k smallest weighted Euclidean distances to n given points, each protected by some polygonal forbidden region. For the unweighted case and k fixed an O(n²logn) time algorithm is presented. For the weighted case a thorough study of the relevant structure of the multiplicatively weighted order-k-Voronoi diagram leads to the design of an O(kn³+n³logn) time algorithm for finding an optimal solution to the anti-t-centrum problem for every t=1,…,k, simultaneously.     

EDUCA: A web 2.0 authoring tool for developing adaptive and intelligent tutoring systems using a Kohonen network

This paper presents a Web 2.0 Learning Environment, for a systematic creation of adaptive and intelligent tutoring systems. Authoring contents is made by a community of users including teachers and students. The tutoring systems adapt the contents according to the best learning style using self-organizing maps (SOMs). The SOM was trained for classifying Felder–Silverman learning styles. The most important advantage of these unsupervised neural networks is that they do not require an external teacher for presenting a training set. The approach was implemented under an authoring tool that allows the production of personalized learning material to be used under collaborative and mobile learning environments. The tutoring systems together with the neural network can also be exported to mobile devices. We present different results to the approach working under the authoring tool.