Development of AAS resin by the emulsion–suspension polymerization method

In order to improve the weatherability of acryonitrile—styrene—butadiene rubber graft polymer (ABS resin), an attempt was made to develop a resin (AAS resin) in which acrylic rubber of good weatherability was used instead of butadiene rubber. First, by copolymerizing dicyclopentenyl-methacrylate (DCP-MA,3%) with butyl acrylate, crosslinked acrylic rubber was obtained. This also introduced grafting sites into the rubber. Next, methods of graft copolymerizing styrene and acrylonitrile with this rubber were examined. An emulsion–suspension polymerization method was developed in which the initial stage of the polymerization, emulsion polymerization, changed into suspension polymerization during the process. By this method of polymerization, rubber particles were combined and enlarged, bringing about a graft-type resin with high impact resistance. This polymerization method is industrially useful because particle-shaped resins are obtained without the need of a salting-out process. The AAS resin, obtained in this way, has much improved weatherability over ABS resin and shows strength equal to that of ABS resin. © 1992 John Wiley & Sons, Inc.     

Characterisation of volatile sulphur-containing compounds generated in crushed leaves of Chinese chive (Allium tuberosum Rottler)

To characterise the composition of sulphur-containing constituents in Chinese chive (Allium tuberosum Rottler), GC–MS and HPLC analyses were carried out, using 12 varieties of Chinese origin, 4 varieties of Japanese origin and 6 commercially available cultivars. Five disulphides (dimethyl, allyl methyl, methyl 1-(E)-propenyl, diallyl, and allyl 1-(E)-propenyl), two trisulphides (dimethyl and allyl methyl), and two vinyldithiins (3-vinyl-[4H]-1,2- and 2-vinyl-[4H]-1,3-) were identified on the basis of their mass spectral and GC-retention data. Among the detected sulphur compounds, sulphides with a methyl group predominated over those with an allyl group. This was supported by the HPLC estimations, suggesting that all cultivars examined had much greater amounts of methiin than alliin. Also, two novel compounds were tentatively identified as [3H,4H]-1,2-dithiin and [2H,4H]-1,3-dithiin on the basis of their mass spectral features, GC-retention data, and some experimental results on their formation in reaction mixtures with different proportions of methiin and alliin. Their formation mechanism was proposed.     

Clinicopathological features in HLA-DR-negative acute myeloid leukemia

From a series of 176 patients with acute myeloid leukemia (AML), we have identified 11 patients with HLA-DR-negative AML excluding acute promyelocytic leukemia. All patients showed not (15; 17) or consistent chromosomal abnormalities. According to the French-British-American criteria, seven, three, and one patients were classified into M1, M2, and M4, respectively. Blasts from these patients were CD33+, HLA-DR-, and lymphoid-antigen-. All patients entered complete remission after induction therapy. Of these, blasts from four patients had strikingly invaginated nuclear membrane and finely granular peroxidase activity. The phenotype of the blasts was CD33+, CD34-, CD2-, and HLA-DR-. All four patients showed hyperleukocytosis on initial presentation. One patient received all-trans retinoic acid at relapse, however, the drug did not induce the differentiation of the blasts. These four patients were suspected to have acute myeloid/natural killer (NK) leukemia because of the prominent morphological feature of the blasts and the initial hyperleukocytosis, although NK cell activity of the blasts was not examined. Since HLA-DR-negative AML is heterogeneous, it is necessary for identifying acute myeloid/ NK leukemia within the disorder.     

Terpendole E and its Derivative Inhibit STLC‐ and GSK‐1‐Resistant Eg5

Terpendole E is first natural product found to inhibit mitotic kinesin Eg5, but its inhibitory mechanism remains to be revealed. Here, we report the effects of terpendole E and 11ketopaspaline (a new natural terpendole E analogue) on the Eg5–microtubule interaction and in several Eg5 mutants. 11‐Ketopaspaline is a shunt product from terpendole E, and it shows potent inhibitory activity against the microtubule‐stimulated ATPase activity of Eg5. Unlike other Eg5 inhibitors, such as S‐trityl‐L ‐cysteine (STLC) and GSK‐1, both terpendole E and 11‐ketopaspaline only partially inhibited Eg5–microtubule interaction. Furthermore, terpendole E and 11‐ketopaspaline inhibited several Eg5 mutants that are resistant to STLC (Eg5^D130A, Eg5^L214A) or GSK‐1 (Eg5^I299F, Eg5^A356T), but with the same extent of inhibition against wild‐type Eg5. Because Eg5^D130A and Eg5^L214A show cross‐resistance to most known Eg5 inhibitors, which bind the L5 loop, these results suggest that terpendole E and its analogues have a different binding site and/or inhibitory mechanism to those for L5 loop‐binding type Eg5 inhibitors.     

Half-data-page insertion method for increasing recording density in angular multiplexing holographic memory

We have developed a method to use a half-size data page between two full-size data pages to increase the recording density in angular multiplexing holographic memory up to 1.5× as much as the conventional angular multiplexing sequence. In our recording sequence, the full- and half-size data pages are alternately multiplexed. This is because each plane wave from various points in a data page has different angular selectivity. A half-size data page has higher angular selectivity than a full-size data page. The required angular intervals were estimated by numerical simulation taking holographic medium tilt into account. Also, an angular multiplexing experiment using the half-data-page insertion method resulted in a low bit error rate of the order of 10(-3), which is sufficient for practical use.     

Difference in environmental degradability between poly(ethylene succinate) and poly(3-hydroxybutyrate)

A chemosynthetic aliphatic polyester, poly(ethylene succinate) (PESu), was degraded by a poly(3-hydroxybutyrate) (P(3HB)) depolymerase in vitro. While P(3HB) exhibited good biodegradability in all environments, PESu hardly underwent biodegradation in a marine environment. To understand the difference in environmental degradability between PESu and P(3HB), we investigated the distribution of P(3HB)- and PESu-degrading microbes in various environments. PESu-degrading microbes were never detected in marine environments. PESu-degrading bacteria isolated from various environments in this study belonged to the phyla Firmicutes and Proteobacteria. Most PESu-degrading bacterial isolates could not degrade P(3HB), suggesting that PESu was not degraded by P(3HB) depolymerase in actual environments. In addition, all bacterial isolates that were screened for P(3HB) degrading activity from various environments in this study did not degrade PESu, suggesting that PESu does not induce P(3HB) depolymerase in their bacteria and P(3HB)-degrading bacteria are not involved in biodegradation of PESu in actual environments. Taken together, these results could be related with the low biodegradability of PESu in marine environments.     

Direct Observation of k∥ and k⊥ Stripe Excitations in La2?x Sr x CuO4

The superconducting transition temperature in the cuprate is pointed to be enhanced by the self-organized spin-charge separated stripes. The magnetic excitations are very different in k?? and k???stripes. Therefore if one detects the different excitations, it is a clear evidence of the stripe. Neutron scattering, however, always observes the mixed excitations. We first succeeded to detect the k???stripe excitations of the separated dispersion induced by the super-lattice structure of the stripe in distinction from the k???stripe excitations by two-magnon Raman scattering. The stripe structure is ubiquitous in the whole carrier density range at low temperatures.     

α-Fe2O3 nano-platelets prepared by mechanochemical/thermal processing

A new method to prepare plate-shaped Fe₂O₃ nanoparticles was investigated and their magnetic properties were characterised. First, Fe₂O₃ nanoparticles of ~ 6 nm in diameter were synthesised by mechanochemical processing, involving the solid-state exchange reaction Fe₂(SO₄)₃ + 3 Na₂CO₃ → Fe₂(CO₃)₃ + 3 Na₂SO₄ → Fe₂O₃ + 3 Na₂SO₄ +  3 CO₂ (g) effected by high-energy ball milling and subsequent heat treatment at 400 °C. Next, nano-platelets were grown from the nanoparticles by further heat treatment in a salt matrix at 700 °C. Removal of the salt and by-product phases after heat treatment led to well-dispersed platy haematite particles of 20-200 nm in diameter with aspect ratio of 4-10. The hematite nano-platelets were weakly ferromagnetic with coercivity of ~ 160 Oe and remanent magnetisation of 0.2 emu/g.     

Biweekly cyclophosphamide, epirubicin, vincristine and prednisolone (CEOP) chemotherapy for the elderly patients with aggressive non-Hodgkin''s lymphoma. Tochigi Malignant Lymphoma Study Group for the Elderly Patients

Changes in cerebral blood oxygenation and flow during prolonged activation of human visual cortex (6-min video projection) were monitored using high-resolution T2*- and T1-weighted gradient-echo MRI in identical sessions. Oxygenation-sensitive recordings displayed an initial signal increase (oxygenation "overshoot"), a subsequent signal decrease extending over 4-5 min (relative deoxygenation), and a signal drop after the end of stimulation that mirrored the initial response (oxygenation "undershoot"). Flow-sensitive MRI demonstrated that the inflow effect remained elevated during the entire period of stimulation. The observation of gradually decreasing cerebral blood oxygenation, despite persisting elevation of blood flow, may be understood to be an accumulation of deoxyhemoglobin due to the progressive up-regulation of oxidative phosphorylation. The present findings support a concept in which transitions between functional states lead to an uncoupling of perfusion (oxygen delivery) from oxidative metabolism (oxygen consumption) whereas steady-state activity achieves their recoupling.