Nanolayer CrAlN/TiSiN coating designed for tribological applications

With the goal to produce a hard and tough coating intended for tribological applications, CrAlN/TiSiN nanolayer coating was prepared by alternative deposition of CrAlN and TiSiN layers. In the first part of the article, a detailed study of phase composition, microstructure, and layer structure of CrAlN/TiSiN coating is presented. In the second part, its mechanical properties, fracture and tribological behavior are compared to the nanocomposite TiSiN coating. An industrial magnetron sputtering unit was used for coating deposition. X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were used for compositional and microstructural analysis. Mechanical properties and fracture behavior were studied by instrumented indentation and focused ion beam techniques. Tribological properties were evaluated by ball-on-disk test in a linear reciprocal mode. A complex layer structure was found in the nanolayer coating. The TiSiN layers were epitaxially stabilized inside the coating which led to formation of dislocations at interfaces, to introduction of disturbances in the coating growth, and as a result, to development of fine-grained columnar microstructure. Indentation load required for the onset of fracture was twice lower for the nanolayer CrAlN/TiSiN, compared to the nanocomposite TiSiN coating. This agrees very well with their mechanical properties, with H³/E² being twice higher for the TiSiN coating. However, the nanolayer coating experienced less severe damage, which had a strong impact on tribological behavior. A magnitude of order lower wear rate and four times lower steady state friction coefficient were found for the nanolayer coating.     

Use of the Retarded Solution-Reprecipitation Process to Attain a Higher Initial Permeability in MnZn Ferrites

We investigated the effect of various amounts of liquid phase on microstructure development during sintering and the resulting magnetic permeability of MnZn ferrite (MZF) samples. Our results revealed that the microstructure and the final magnetic permeability depend on the thickness of the liquid-phase film during sintering. The solution-reprecipitation (S-R) process, which is associated with an intensive microstructure development in MZF, starts when a continuous liquid-phase film of critical thickness δ_o, which wets the MZF grains, is formed. The solid-state sintering that takes place before the formation of the continuous liquid-phase film is essential for the final microstructure of MZF.     

A VLIW processor with reconfigurable instruction set for embedded applications

This paper describes a new architecture for embedded reconfigurable computing, based on a very-long instruction word (VLIW) processor enhanced with an additional run-time configurable datapath. The reconfigurable unit is tightly coupled with the processor, featuring an application-specific instruction-set extension. Mapping computation intensive algorithmic portions on the reconfigurable unit allows a more efficient elaboration, thus leading to an improvement in both timing performance and power consumption. A test chip has been implemented in a standard 0.18-/spl mu/m CMOS technology. The test of a signal processing algorithmic benchmark showed speedups ranging from 4.3/spl times/ to 13.5/spl times/ and energy consumption reduced up to 92%.     

Synthesis and Evaluation of Voltage-Gated Sodium Channel Blocking Pyrroline Derivatives Endowed with Both Antiarrhythmic and Antioxidant Activities

Under the hypothesis that cardioprotective agents might benefit from synergism between antiarrhythmic activity and antioxidant properties, a small series of mexiletine analogues were coupled with the 2,2,5,5-tetramethylpyrroline moiety, known for its antioxidant effect, in order to obtain dual-acting drugs potentially useful in the protection of the heart against post-ischemic reperfusion injury. The pyrroline derivatives reported herein were found to be more potent as antiarrhythmic agents than mexiletine and displayed antioxidant activity. The most interesting tetramethylpyrroline congener, a tert-butyl-substituted analogue, was at least 100 times more active as an antiarrhythmic than mexiletine.     

Enabling customers engagement and collaboration for small and medium-sized enterprises in ubiquitous multi-channel ecosystems

Over the last few years, we have encountered an exponential growth in online communication opportunities. Organizations have more and more ways to connect and engage with their current or future customers. The existence of more opportunities in connecting to people can be both an enabler and a burden. Being present at a multitude of different channels requires the effective management of a very large number of adapted contents, formats, and interaction patterns fulfilling the communication and cooperation needs of distributed target groups. In this respect, we integrate existing fragmented communication and monitoring approaches into a full-fledged communication model as a basis for an adequate engagement approach. We describe applications of our approach in both the eTourism and manufacturing domain. In this paper, we introduce an approach that will enable communication, collaboration and value exchange of users through a multitude of online interaction possibilities based on the use of semantic technology. Finally, we also compare our approach with existing solutions with respect to the identified challenges in this subject.     

Prediction of the natural gas consumption in chemical processing facilities with genetic programming

Cinkarna Ltd. is a chemical processing company in Slovenia and the country’s largest manufacturer of titanium oxides (TiO₂). Chemical processing and titanium oxide manufacturing in particular requires high natural gas consumption, and it is difficult to accurately pre-order gas from suppliers. In accordance with the Energy Agency of the Republic of Slovenia regulations, each natural gas supplier regulates and determines the charges for the differences between the ordered (predicted) and the actually supplied quantities of natural gas. Yearly charges for these differences total 1.11 % of supplied natural gas costs (average 50,960 EUR per year). This paper presents natural gas consumption prediction and the minimization of associated costs. The data on daily temperature, steam boilers, sulfur acid and TiO₂ production was collected from January 2012 until November 2014. Based on the collected data, a linear regression and a genetic programming model were developed. Compared to the specialist’s prediction of natural gas consumption, the linear regression and genetic programming models reduce the charges for the differences between the ordered and the actually supplied quantities by 3.00 and 5.30 times, respectively. Also, from January until November 2014 the same genetic programming model was used in practice. The results show that in a similar gas consumption regime the differences between the ordered and the actually supplied quantities are statistically significant, namely, they are 3.19 times lower (t test, p < 0.05) than in the period in which the specialist responsible for natural gas consumption made the predictions.     

Multifunctional Gadolinium‐Doped Mesoporous TiO2 Nanobeads: Photoluminescence,Enhanced Spin Relaxation,and Reactive Oxygen Species Photogeneration,Beneficial for Cancer Diagnosis and Treatment

Materials with controllable multifunctional abilities for optical imaging (OI) and magnetic resonant imaging (MRI) that also can be used in photodynamic therapy are very interesting for future applications. Mesoporous TiO₂ sub‐micrometer particles are doped with gadolinium to improve photoluminescence functionality and spin relaxation for MRI, with the added benefit of enhanced generation of reactive oxygen species (ROS). The Gd‐doped TiO₂ exhibits red emission at 637 nm that is beneficial for OI and significantly improves MRI relaxation times, with a beneficial decrease in spin–lattice and spin–spin relaxation times. Density functional theory calculations show that Gd³⁺ ions introduce impurity energy levels inside the bandgap of anatase TiO₂, and also create dipoles that are beneficial for charge separation and decreased electron–hole recombination in the doped lattice. The Gd‐doped TiO₂ nanobeads (NBs) show enhanced ability for ROS monitored via ^?OH radical photogeneration, in comparison with undoped TiO₂ nanobeads and TiO₂ P25, for Gd‐doping up to 10%. Cellular internalization and biocompatibility of TiO₂@x Gd NBs are tested in vitro on MG‐63 human osteosarcoma cells, showing full biocompatibility. After photoactivation of the particles, anticancer trace by means of ROS photogeneration is observed just after 3 min irradiation.     

Study of DNA Origami Dimerization and Dimer Dissociation Dynamics and of the Factors that Limit Dimerization

Organizing DNA origami building blocks into higher order structures is essential for fabrication of large structurally and functionally diverse devices and molecular machines. Unfortunately, the yields of origami building block attachment reactions are typically not sufficient to allow programed assembly of DNA devices made from more than a few origami building blocks. To investigate possible reasons for these low yields, a detailed single‐molecule fluorescence study of the dynamics of rectangular origami dimerization and origami dimer dissociation reactions is conducted. Reactions kinetics and yields are investigated at different origami and ion concentrations, for different ion types, for different lengths of bridging strands, and for the “sticky end” and “weaving welding” attachment techniques. Dimerization yields are never higher than 86%, which is typical for such systems. Analysis of the dynamic data shows that the low yield cannot be explained by thermodynamic instability or structural imperfections of the origami constructs. Atomic force microscopy and gel electrophoresis evidence reveal self‐dimerization of the origami monomers, likely via blunt‐end interactions made possible by the presence of bridging strands. It is suggested that this mechanism is the major factor that inhibits correct dimerization and means to overcome it are discussed.     

Sensitive Label-Free Immunoassay by Colorimetric Plasmonic Biosensors Using Silver Nanodome Arrays

The sensitive direct detection of biomolecules is demonstrated by a colorimetric plasmonic biosensor utilizing the surface colors of plasmonic metasurfaces named Ag nanodome arrays. The Ag nanodome arrays consist of polystyrene bead monolayers coated with Ag thin films whose surface colors are optimized by changing the size of the polystyrene beads. The bulk refractive index sensitivity of colorimetric detection evaluated using the hue angle is 590° RIU⁻¹ (RIU: refractive index unit). For selected geometry, the refractive index resolution (5.0 × 10⁻⁵ RIU) obtained by colorimetric detection surpasses that of spectroscopic detection evaluated via the dip wavelength in the reflection spectrum. The numerical simulations predict an enhanced sensing performance when the hue angle of the surface colors of the Ag nanodome arrays changes from 300° to 200°, corresponding to changes in the dip wavelength from 570 to 600 nm in the reflection spectra. Furthermore, the detection sensitivity of the biomolecules is characterized using a direct IgG immunoassay format. The detection limit of the IgG concentration is as low as 134 pM using simple colorimetric detection. The feasibility of sensitive label-free immunoassays using a colorimetric plasmonic biosensor is expected to accelerate the development of highly sensitive and reliable smartphone-based plasmonic biosensors.     

Multiple spatial sounds in hierarchical menu navigation for visually impaired computer users

This paper describes a user study on the benefits and drawbacks of simultaneous spatial sounds in auditory interfaces for visually impaired and blind computer users. Two different auditory interfaces in spatial and non-spatial condition were proposed to represent the hierarchical menu structure of a simple word processing application. In the horizontal interface, the sound sources or the menu items were located in the horizontal plane on a virtual ring surrounding the user’s head, while the sound sources in the vertical interface were aligned one above the other in front of the user. In the vertical interface, the central pitch of the sound sources at different elevations was changed in order to improve the otherwise relatively low localization performance in the vertical dimension. The interaction with the interfaces was based on a standard computer keyboard for input and a pair of studio headphones for output. Twelve blind or visually impaired test subjects were asked to perform ten different word processing tasks within four experiment conditions. Task completion times, navigation performance, overall satisfaction and cognitive workload were evaluated. The initial hypothesis, i.e. that the spatial auditory interfaces with multiple simultaneous sounds should prove to be faster and more efficient than non-spatial ones, was not confirmed. On the contrary—spatial auditory interfaces proved to be significantly slower due to the high cognitive workload and temporal demand. The majority of users did in fact finish tasks with less navigation and key pressing; however, they required much more time. They reported the spatial auditory interfaces to be hard to use for a longer period of time due to the high temporal and mental demand, especially with regards to the comprehension of multiple simultaneous sounds. The comparison between the horizontal and vertical interface showed no significant differences between the two. It is important to point out that all participants were novice users of the system; therefore it is possible that the overall performance could change with a more extensive use of the interfaces and an increased number of trials or experiments sets. Our interviews with visually impaired and blind computer users showed that they are used to sharing their auditory channel in order to perform multiple simultaneous tasks such as listening to the radio, talking to somebody, using the computer, etc. As the perception of multiple simultaneous sounds requires the entire capacity of the auditory channel and total concentration of the listener, it does therefore not enable such multitasking.