Experimental investigation of Co and Fe-Doped CuO nanostructured electrode material for remarkable electrochemical performance

The current research work presents a facile and cost–effective co-precipitation method to prepare doped (Co & Fe) CuO and undoped CuO nanostructures without usage of any type of surfactant or capping agents. The structural analysis reveals monoclinic crystal structure of synthesized pure CuO and doped-CuO nanostructures. The effect of different morphologies on the performance of supercapacitors has been found in CV (cyclic voltammetry) and GCD (galvanic charge discharge) investigations. The specific capacitances have been obtained 156 (±5) Fg^?1, 168(±5) Fg^?1 and 186 (±5) Fg^?1 for CuO, Co-doped CuO and Fe-doped CuO electrodes, respectively at scan rate of 5 mVs^?1, while it is found to be 114 (±5) Fg^?1, 136 (±5) Fg^?1 and 170 (±5) Fg^?1 for CuO, Co–CuO and Fe–CuO, respectively at 0.5 Ag^-1 as calculated from the GCD. The super capacitive performance of the Fe–CuO nanorods is mainly attributed to the synergism that evolves between CuO and Fe metal ion. The Fe-doped CuO with its nanorods like morphology provides superior specific capacitance value and excellent cyclic stability among all studied nanostructured electrodes. Consequently, it motivates to the use of Fe-doped CuO nanostructures as electrode material in the next generation energy storage devices.     

The effect of copper on the crystallization of hexagonal boron nitride

The crystallization process of hexagonal boron nitride in the presence of copper has been investigated. The positive effect of copper on the crystallinity of boron nitride was observed in the three studied systems of: nitrided boron, nitrided boron–carbon, and previously prepared turbostratic boron nitride. However, the presence of copper hindered the formation of boron carbonitride and produced graphite and boron nitride phases separately. Poor crystallinity was found as a conditio sine qua non for the existence of such a compound. Well-crystallized boron nitride had a very low spacing parameter 0.3328 nm and a regular hexagonal shape.     

Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

NUCLEAR MAGNETIC RESONANCE STUDIES OF ASPHALTENES AND COALS. A NEW APPROACH TO OBTAINING ASPHALTENE STRUCTURAL PARAMETERS WITH DIPOLAR DEPHASING

Apparent carbon aromaticities, fa, of some asphaltenes have been measured by n.m.r. in solution and compared with those obtained by the CP/MAS technique on solid samples. The aromaticities were also measured for several Alberta plains coals. From the 1H solution spectra and 13C solid nmr spectra of asphaltenes, some of their skeletal features, not obtainable from solution spectra only, have been suggested.     

Chronic headaches and sleep disorders

BACKGROUND: Headaches and sleep problems are common complaints in the daily practice of the general practitioner. Since the relationship between headaches and sleep complaints is complex, clear models of interaction are needed for adequate diagnosis and treatment. METHODS: All subjects, successively seen in a headache clinic during a defined period, were subdivided based on the time of onset of cephalalgia. Subjects who reported onset of headache on a long-term basis, during the nocturnal or early morning (before final awakening) period, were systematically studied by a headache clinic and a sleep disorders center. This subgroup represented 17% of the total headache group. RESULTS: Although the results of the headache clinic study did not differentiate this subgroup from the other patients, the sleep disorders center's interviews and questionnaires demonstrated a significant impact of the sleep disorders on headache and daytime function. Nocturnal monitoring during sleep identified specific sleep disorders in 55% of the subjects with onset of headache during the nocturnal sleep period. Follow-up after treatment of the sleep disorder showed that all subjects with an identifiable sleep disorder reported either an improvement or absence of their headache. The subjects identified with periodic limb movement syndrome were mostly those who reported only an improvement in their sleep and still needed treatment for their headaches. The question of the interaction and association of sleep-related headache and periodic limb movement syndrome is unresolved. CONCLUSION: Headaches occurring during the night or early morning are often related to a sleep disturbance.     

Nephrotic syndrome. What is new since the 1988 study?

Hormone-refractory prostate cancer (HRPC) patients often have nonmeasurable disease. In such patients, predictive biomarkers other than tumor response may be required to compare therapeutic effects. We examined the predictive value for survival of various clinical and laboratory parameters, including prostate-specific antigen (PSA), in HRPC patients treated with suramin. Data from 103 HRPC patients were analyzed using various survival analyses, the likelihood ratio approach, and logistic regression analyses. When pretreatment factors, percentage decrease in PSA at 4 weeks from start of treatment (deltaPSA), and updated survival data were fit by a multivariate Cox proportional hazards model, acid phosphatase, lactate dehydrogenase, and deltaPSA were significant, with risk ratios close to 1. There was a decrease in likelihood ratio with increasing APSA. A logistic regression model was developed to predict the probability of <1 year of survival from the start of treatment. Hemoglobin and deltaPSA were found to be significant variables. However, in view of the complexities involving the relationship between PSA expression and prostate cancer growth and possible selective effect of treatment on PSA, further prospective testing is necessary. Therefore, deltaPSA cannot necessarily be used as a biomarker for survival response in individual patients during the evaluation of the therapeutic response of HRPC to new antineoplastic drugs.     

Correction to: “SPOCU”: scaled polynomial constant unit activation function

Neural Computing and Applications - Addendum on SPOCU fitting and Erratum.     

A case of using the Semantic Interoperability Framework for custom orthopedic implants manufacturing

The efficiency and effectiveness of the daily practice in orthopedic surgery depend on the availability, interoperability and unique access to a wide set of information, related to the patient’s medical record and diagnosis, domain knowledge and available resources and staff. The most important of the tangible resources, needed for the therapeutic or preventive actions are orthopedic implants. In some cases, the implants may be highly complex and customized products, which need to be manufactured (assembled) on basis of the above information in a shortest possible timeframe. In this paper, the case of the custom orthopedic implants manufacturing is described from the perspective of the collaborative enterprising, with special consideration of the interoperability issues of the involved enterprise collaboration. It is shown how the previously developed Semantic Interoperability Framework can be used to improve the efficiency of the manufacturing and other relevant processes.