Synthesis and characterization of olivine LiNiPO4 for aqueous rechargeable battery

LiNiPO₄ belongs to a family of olivine type compounds, with members LiMPO₄ where M = Fe, Mn, Co or Ni are transition metals. The lithium nickel phosphate was prepared and characterized in order to evaluate a new potential cathode material for our ongoing research in aqueous rechargeable batteries. Annealing the final product is critical in obtaining the stoichiometric LiNiPO₄ pure phase; conventional cooling to a room temperature leads to an indication of Li₃PO₄ and NiO secondary phases as impurities. The synchrotron infrared radiation (SR-IR) as a source for IR spectroscopy pins down the differences in the chemical bonding for annealed and conventional cooled LiNiPO₄ samples. The cyclic voltammetric and galvanostatic studies showed annealed LiNiPO₄ is electrochemically active from which lithium ions can be de-intercalated during oxidation process leading to an amorphous NiPO₄ and a minor product of nickel(II) hydroxide (β-NiOOH). During subsequent reduction, lithium ions are not fully intercalated, however, the structure is reversible and adequate for multiple cycles. The high potential in LiNiPO₄ looks to be very attractive in terms of high energy density, given the efficiency is improved.     

Cyp1 Inhibition Prevents Doxorubicin-Induced Cardiomyopathy in a Zebrafish Heart-Failure Model

Doxorubicin is a highly effective chemotherapy agent used to treat many common malignancies. However, its use is limited by cardiotoxicity, and cumulative doses exponentially increase the risk of heart failure. To identify novel heart failure treatment targets, a zebrafish model of doxorubicin-induced cardiomyopathy was previously established for small-molecule screening. Using this model, several small molecules that prevent doxorubicin-induced cardiotoxicity both in zebrafish and in mouse models have previously been identified. In this study, exploration of doxorubicin cardiotoxicity is expanded by screening 2271 small molecules from a proprietary, target-annotated tool compound collection. It is found that 120 small molecules can prevent doxorubicin-induced cardiotoxicity, including 7 highly effective compounds. Of these, all seven exhibited inhibitory activity towards cytochrome P450 family 1 (CYP1). These results are consistent with previous findings, in which visnagin, a CYP1 inhibitor, also prevents doxorubicin-induced cardiotoxicity. Importantly, genetic mutation of cyp1a protected zebrafish against doxorubicin-induced cardiotoxicity phenotypes. Together, these results provide strong evidence that CYP1 is an important contributor to doxorubicin-induced cardiotoxicity and highlight the CYP1 pathway as a candidate therapeutic target for clinical cardioprotection.     

An efficient method for PET image denoising by combining multi-scale transform and non-local means

Multimedia Tools and Applications - The diagnosis of dementia, particularly in the early stages is very much helpful with Positron emission tomography (PET) image processing. The most important...     

New Insights into the Electrochemical Behavior of Hematite (<Emphasis Type="Italic">α</Emphasis>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>) Microparticles in Strong Aqueous Basic Electrolyte: Formation of Metallic Iron

A detailed electrochemical study of cubic α-Fe₂O₃ microparticles has been carried out in strong aqueous LiOH electrolyte. The α-Fe₂O₃ was synthesized hydrothermally and investigated in the form of an electrochemical cell using an alkaline solution, ‘α-Fe₂O₃|LiOH (saturated), ZnSO₄ (1 M)|Zn’. In this cell, the α-Fe₂O₃ cathode showed a reversible capacity of ca 220 mAh/g within cut-off voltages of 0 and 1.5 V under the constant current of 0.3 mA. The electrochemical performance was attributed to the reversible formation of both proton and lithium intercalation products (FeOOH and LiFeO₂) detected in the cathode material. Interestingly, at a lower discharge current of 0.1 mA, some of the hematite phase was reduced to metallic iron after yielding 336 mAh/g. The various possible electro-reduction reactions, which have direct electro-hydrometallurgical implications, are analyzed and discussed.     

Edge based features for content based image retrieval

The common problem in content based image retrieval (CBIR) is selection of features. Image characterization with lesser number of features involving lower computational cost is always desirable. Edge is a strong feature for characterizing an image. This paper presents a robust technique for extracting edge map of an image which is followed by computation of global feature (like fuzzy compactness) using gray level as well as shape information of the edge map. Unlike other existing techniques it does not require pre segmentation for the computation of features. This algorithm is also computationally attractive as it computes different features with limited number of selected pixels.     

Effect of glycidyl methacrylate (GMA) content on thermal and mechanical properties of ternary blend systems based on cardanol-based vinyl ester resin,styrene and glycidyl methacrylate

Cardanol-based vinyl ester resin (CVER) was prepared by reacting indigenously synthesized cardanol-based epoxidized novolac resin (CENR) with methacrylic acid (MA) in the presence of triphenylphosphine as catalyst. Five samples of cardanol-based vinyl ester resin containing styrene and glycidyl methacrylate (GMA), as diluents, in the weight ratios 40:0, 30:10, 20:20, 10:30 and 0:40 were prepared at room temperature. Sharp exotherms were observed in DSC scans in the temperature range of 60–170 °C. The onset temperature (T_onset), peak exothermic temperature (T_p) and completion temperature (T_stop) decreased with increase in GMA content in the ternary blend systems of CVER/styrene/GMA. A broad exotherm was observed after the initial sharp exotherm that was attributed to the etherification reaction. Cured samples were found to be stable up to 205–235 °C and started loosing weight above this temperature. Rapid decomposition was observed in the temperature range of 400–550 °C as evidenced by TGA analysis. Increase of GMA content in ternary blend systems of CVER/styrene/GMA lowered the tensile strength progressively and enhanced the impact strength and elongation-at-break. The cured films of VER containing mixture of styrene and GMA exhibited good gloss and impact resistance. The chemical resistance of cured films of VER containing mixture of styrene and GMA showed good resistance to acids, deionized water, synthetic sea water and mineral turpentine oil.     

The effect of B4C addition to MnO2 in a cathode material for battery applications

Boron carbide (B₄C) added manganese dioxide (MnO₂) used as a cathode material for a Zn-MnO₂ battery using aqueous lithium hydroxide (LiOH) as the electrolyte is known to have higher discharge capacity but with a lower average discharge voltage than pure MnO₂ (additive free). The performance is reversed when using potassium hydroxide (KOH) as the electrolyte. Herein, the MnO₂ was mixed with 0, 5, 7 and 10 wt.% of boron carbide during the electrode preparation. The discharge performance of the Zn|LiOH|MnO₂ battery was improved by the addition of 5-7 wt.% boron carbide in MnO₂ cathode as compared with the pure MnO₂. However, increasing the additive to 10 wt.% causes a decrease in the discharge capacity. The performance of the Zn|KOH|MnO₂ battery was retarded by the boron carbide additive. Transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy analysis (EDS) results show evidence of crystalline MnO₂ particles during discharging in LiOH electrolyte, whereas, manganese oxide particles with different oxygen and manganese counts leading to mixture of phases is observed for KOH electrolyte which is in agreement with X-ray diffraction (XRD) data. The enhanced discharge capacity indicates that boron atoms promote lithium intercalation during the electrochemical process and improved the performance of the Zn|LiOH|MnO₂ battery. This observed improvement may be a consequence of B₄C suppressing the formation of undesirable Mn(III) phases, which in turn leads to enhanced lithium intercalation. Too much boron carbide hinders the charge carrier which inhibits the discharge capacity.     

Burden of organochlorine pesticides in blood and its effect on thyroid hormones in women

Man has utilized a wide variety of pesticides to combat the crop pests and vectors of human diseases. However, in this process, he has overlooked the darker side of these noxious chemicals, the concentrations of which have reached the environment and pose serious threats, such as mutagenesis, teratogenesis, carcinogenesis and endocrine dysfunction in various components of the ecosystem. The present study was planned to assess the burden of organochlorine pesticides and their influence on thyroid function in women. The study included a total of 123 women from Jaipur City who visited the Thyroid clinic in SMS Medical College and Hospital. One hundred women showed normal thyroid hormone levels while the remaining 23 women had depleted T4 and high TSH levels. The qualitative and quantitative estimation of organochlorine pesticides was carried out by gas chromatography. Out of the analyzed pesticides, the concentration of p,p'-DDT and its metabolites was higher in all the subjects, but dieldrin was found to be significantly high in the hypothyroid women. The correlation analysis for dieldrin and depleted T4 levels in hypothyroid women elicited an inverse relationship between them.