Microstructure, mechanical property and chemical property in Ni3Al-Ni3Ti-Ni3Nb-based multi-intermetallic alloys

Microstructure, high-temperature compressive and tensile deformation, and corrosion property of multi-phase alloys based on Ni₃Al-Ni₃Ti-Ni₃Nb pseudo-ternary alloy system were investigated. The microstructures of these alloys were largely dependent on alloy composition but independent of annealing temperature. Alloys composed of multi-phase microstructures of L1₂, D0₂₄ and D0_a showed substantially enhanced compressive yield stress as well as a certain amount of compressive plasticity at whole temperature, while they did not show reasonable tensile elongation at whole temperature. Also, alloys composed of lamellar-like multi-phase microstructures are effective in enhancing compressive yield stress particularly at high temperature. Multi-phase alloys with low Nb contents have good corrosion resistance, especially in high concentration of sulfuric acid.     

Morphological and crystallographic features of γ-γ′ Ni-Al and Ni-Al-Ti two-phase bicrystals

Several- Ni-Al and Ni-Al-Ti two-phase bicrystals were made by the solid-state diffusion couple method. Each couple consisted of a-phase single crystal and a pure-Ni polycrystal, and was annealed at 1473 K in an Ar gas atmosphere. Single crystal layers of-phase with uniform thickness always grow into the parent-phase single crystals. The resultant/ interface has no voids or facets regardless of the orientation of interface and the chemical composition of the-phase. Porosity formation due to the Kirkendall effect is observed in the diffused region. Concentration profiles exhibit nearly constant gradients in-phase. The orientation relationship between both phases is found to be 001//001, that is, the-phase grows epitaxially along the crystal orientation of-phase.     

Advanced compensation technologies for large‐sized UHD OLED TVs

In this paper, we present novel organic light‐emitting diode (OLED) display panel compensation technologies for large‐sized ultra‐high‐definition OLED TVs considering variations of threshold voltage, mobility, channel size, OLED efficiency, and OLED uniformity. Using these technologies, we have successfully launched 55‐, 65‐ and 77‐in. ultra‐high‐definition OLED TVs.     

Investigation of Precipitation Behavior in Age-Hardenable Cu-Ti Alloys by an Extraction-Based Approach

We investigated the precipitation processes in Cu-4 mol pct Ti alloy specimens aged at 723 K (450 °C), by means of X-ray diffraction and chemical analyses of the precipitates extracted from the parent alloy specimens. Aging-induced precipitate particles of a spinodally decomposed disorder, α′; those of a metastable order, β′-Cu₄Ti; and those of a stable order, β-Cu₄Ti, were continuously formed in the aged specimens. The extraction of the precipitate particles from the aged specimens by submergence in a nitric solution allowed for not only the structural analyses of the constituent precipitate phases but also the quantitative evaluation of their chemical compositions and volume fractions. Early during the aging process, the supersaturated Cu solid solution decomposes spinodally in a continuous manner, and an unstable disorder, α′, appears. Then, fine needle-shaped β′-Cu₄Ti particles, which have a Ti content of approximately 37.5 mol pct, form in the Cu matrix. During prolonged aging, coarse cellular components composed of the terminal Cu solid solution and stable β-Cu₄Ti particles which have a Ti content of 20.5 mol pct nucleate and grow, primarily in the grain boundaries, at the expense of the metastable β′-Cu₄Ti particles. The volume fraction of the β′-Cu₄Ti particles in the alloy reaches a maximum of approximately 1.7 pct after aging for 24 hours, while that of the β-Cu₄Ti particles increases steadily to more than 18 pct after 480 hours. The volume fraction of the fine β′-Cu₄Ti particles in the alloy specimens remained constant throughout the age-hardening, indicating that the hardening is primarily owing to the fine dispersion of the β′-Cu₄Ti particles and not because of the large volume fraction of coarse β-Cu₄Ti particles.     

Phase equilibria in the Co-rich Co-Al-W-Ti quaternary system

We determined phase equilibria in the Co-rich Co-Al-W-Ti quaternary system at a temperature range between 900 °C and 1200 °C with a close attention to the thermodynamic stability of the γ′-Co₃(Al, W, Ti) (L1₂) phase, based on micro-structure observation and electron microprobe analysis on bulk alloy samples heat-treated for periods up to 2000 h. In the quaternary system the single phase field of γ′ extends from the Co-Ti binary edge to a composition of Co-5Al-8.5W-8Ti (in at.%) at 900 °C. At the tip of the single phase field, the γ′ phase is in equilibrium with the γ-Co (A1), Co₂AlTi (L2₁) and Co₃W (D0₁₉) phases. The constructed vertical section of phase diagram between Co-9.4Al-9.6W and Co-16.5Ti indicates that there is a narrow composition range around Co-4.5Al-5.4W-7.5Ti in which the γ single phase field exists at high temperatures above 1200 °C and two-phase of γ+γ′ is thermodynamically stable at low temperatures below 1100 °C.     

Application of diamond-like Carbon (DLC) coatings for gravitational wave detectors

A laser interferometer gravitational wave detector requires an ultra high vacuum in the tubes in which the laser beams pass. To avoid noise due to scattered light from the surface of tubes, the surface should be treated with “black” coating without increasing the outgassing rate. We found that diamond-like Carbon (DLC) coatings are suitable for this aim. An outgassing rate of at was achieved for DLC coatings on SUS304 without baking. This rate was better than the surface of SUS316 with baking. The reflectivity of the DLC surface was 5% at minimum for a laser beam of Nd:YAG () which is used as a light source for the gravitational wave detector.     

Dynamic observations of the fracture phenomena in alpha/beta brass two-phase bicrystals

In situ dynamic observations of the deformation and fracture characteristics of alpha/beta brass two-phase bicrystals were made by the solid diffusion method. The results indicated clearly that the crack initiation site was at the interface. The crack propagation direction, in both the alpha and beta phases, was found to be orientation dependent. Complementary experiments on alpha and beta brass single crystals confirmed the theories and results obtained previously on ductile single crystals.On leave from the Mechanical Engineering Department, Al-Azhar University, Cairo, Egypt.     

Scanning electron microscopy of food-poisoning bacterium Bacillus cereus using a variable-pressure SEM

A variable-pressure scanning electron microscopy (VP-SEM) with a cooling stage permits long hours of observation of water-containing specimens in their natural or close to natural state, without the conventional specimen preparations of fixation, dehydration, drying and metal coating. It reduces water vaporization and beam damage by keeping the specimens at a low temperature. We observed Bacillus cereus colonies on nutrient agar, which would shrink significantly if any conventional specimen preparation technique were used. We also studied the growing process of the bacteria on raw and steamed rice using the VP-SEM without conventional preparation techniques. Original specimens were directly mounted onto specimen holders and their backscattered electron images observed under the following conditions: specimen stage temperature, -10 degrees C; specimen chamber vacuum level, 30-70 Pa; and accelerating voltage, 15-20 kV. We recognized that the VP-SEM minimized deformation of the colonies due to shrinkage of the nutrient agar, and successfully imaged the morphology of the colonies and bacteria without a decline in bacteria number, which is apt to occur during fixation and dehydration. Also, the growth process of the bacteria on raw or steamed rice could be observed promptly, since there is no specimen preparation step.     

Deformation and fracture of α-β brass two-phase bicrystals at 150 K

The deformation up to fracture at 150 K was undertaken on α-β brass two-phase bicrystals. The variation of the slip systems during the proceeding deformation was studied and explained on the basis of incompatible stresses. The normal stress-strain curves were analyzed for various types of bicrystals and the bending that appeared in the specimens when unloaded was explained with respect to the occurrence of the Bauschinger effect in the α phase. Fracture modes other than those observed at room temperature were present. The results, and other minor problems, were discussed.     

Texture evolution during hot-rolling and recrystallization in B2-type FeAl, NiAl and CoTi intermetallic compounds

The texture evolution during the hot-rolling and the recrystallization of B2-type Fe–48Al, Ni–50Al and Co–50Ti (expressed by at.%) intermetallic compounds were investigated. By hot-rolling at 973 K, Fe–48Al showed a microstructure with coarse grains elongated along rolling direction, while Ni–50Al and Co–50Ti showed a deformed microstructure featured by the heavily distorted (elongated) grains and/or the deformation bands. The hot-rolling texture of Fe–48Al was composed of {111}<uvw>, while those of Ni–50Al and Co–50Ti were composed of {111}<110> and {111}<112>, respectively. After annealing, the recrystallized grains were preferentially nucleated at the grain boundaries for Fe–48Al, and in the heavily distorted regions or the deformation bands for Ni–50Al and Co–50Ti. The orientations of the recrystallized grains were similar with those of the deformed matrix, especially for Ni–50Al and Co–50Ti. The recrystallization textures were generally more dispersive than the hot-rolling texture. Based on these results, the texture evolution during the hot rolling and the recrystallization of the B2-type intermetallic compounds were discussed.