Visceral leishmaniasis: II. Histiocyte ultrastructure in bone marrow associated with low level of parasitaemia and mimicking malignant histiocytosis

The ultrastructural features of histiocytes in the bone marrow (BM) were studied in a febrile, splenomegalic and pancytopenic Sudanese patient who was diagnosed by one of us as visceral leishmaniasis (VL) associated with low level of parasitaemia and mimicking malignant histiocytosis (MH). Serial thick (STS) and ultrathin (SUT) sections showed that the BM was hypercellular and markedly infiltrated by large histiocytes with prominent phagocytosis. A thorough examination of various ST and UT section revealed only a single, typical Leishman-Donovan body. At transmission electron microscopy (TEM) level, two principal types of histiocytic cells were identified: Type I, subdivided into two subtypes, were actively phagocytic histiocytes (PH) with large digestive vacuoles and primary lysosomes; type II were nonphagocytic histiocytes (nPH) with primary lysosomes only. The rate of PH to nPH ws 7:2 in plastic STS. The interaction between the PH and ingested cells is described. Both types of cell were morphologically similar to previously described malignant histiocytic cells. However, this study showed a better characterization of PH during VL.     

A mashup based framework for multi level healthcare interoperability

Healthcare delivery is evolving from disease-centered to patient-centered care delivery where patients are active participants in their healthcare delivery. This calls for more communication and collaboration among all healthcare actors. There is also an increasing demand for personalized healthcare systems that provide effective information management, facilitate communication and collaboration, and support applications to meet user requirements. To address these challenges, we need to advance the integration and interoperability of healthcare applications in a controlled manner. Drawing upon a conceptual model from a collaborative care case study, we identified a set of interoperability requirements and developed a Mashup based interoperability framework. Our framework allows patients and other healthcare actors to engage in collaborative processes through online applications facilitated by mashups. We then use proof-of-concept implementations to demonstrate how our framework is able to facilitate different types of interoperability. We believe that collaborative technologies such as mashups can implement process interoperability requirements to support collaborative care delivery, particularly for asynchronous care delivery.     

Physico-Chemical Properties of the Egyptian Tamarind Seed Oil

The physico-chemical properties of the Egyptian Tamarind seed oil were investigated. The seeds were found to contain a fair amount of oil (16.25%). It was found that the oil has a high acid and iodine values in comparison with cotton seed oil. Arachidic, linoleic, oleic, stearic, palmitic, myristic, and lauric were fractionated by gas liquid chromatography from the tamarind seed oil. More than 50% of the total acids are unsaturated. The infrared spectroscopy showed the presence of 7 absorption bands at wave-number cm^?1 (730, 1150, 1380, 1480, 1750, 2900 and 2950) in the investigated oil. On the other hand chemical analysis of the cake showed a lower protein content and higher sugar content.     

Tomato Seed Oil II Evaluation of the Egyptian Tomato Seed Oil and the Residual Meal

The oil extracted from tomato seeds and the resultant cake were evaluated. The whole seeds were analyzed for the gross composition. The oil extracted with hexane was examined for its physical and chemical properties. The residual meal was evaluated for the gross, minerals and amino acids. The obtained results were compared with those of cotton seeds.     

Instance of hidden instability traps in intermittent transition of moving masses along a flexible beam

The problem of an elastic beam under the periodic loading of successive moving masses is investigated as a pragmatic case for studying dynamic stability of linear time-varying systems. This model serves to highlight the odds of multi-solutions coexistence, a form of hidden instability which reveals dangerous as it may be precipitated by the slightest disturbance or variation in the model. Since no engineering model perfectly represents a physical system, such situations for which Floquet theory naively predicts stability are potentially inevitable. The harmonic balancing method is used in order to thoroughly explore the stability diagrams for detecting these instability gaps. Although this phenomenon has also been described in other physical systems, it has not been addressed for beam–moving mass systems. This result may find particular importance in applications involving self-induced vibrations of elastic structures and hence also appears of practical relevance.     

A Layered-Encoding Cascade Optimization Approach to Product-Mix Planning in High-Mix–Low-Volume Manufacturing

High-mix-low-volume (HMLV) production is currently a worldwide manufacturing trend. It requires a high degree of customization in the manufacturing process to produce a wide range of products in low quantity in order to meet customers' demand for more variety and choices of products. Such a kind of business environment has increased the conversion time and decreased the production efficiency due to frequent production changeover. In this paper, a layered-encoding cascade optimization (LECO) approach is proposed to develop an HMLV product-mix optimizer that exhibits the benefits of low conversion time, high productivity, and high equipment efficiency. Specifically, the genetic algorithm (GA) and particle swarm optimization (PSO) techniques are employed as optimizers for different decision layers in different LECO models. Each GA and PSO optimizer is studied and compared. A number of hypothetical and real data sets from a manufacturing plant are used to evaluate the performance of the proposed GA and PSO optimizers. The results indicate that, with a proper selection of the GA and PSO optimizers, the LECO approach is able to generate high-quality product-mix plans to meet the production demands in HMLV manufacturing environments.     

Sensitivity of CFP/YFP and GFP/mCherry pairs to donor photobleaching on FRET determination by fluorescence lifetime imaging microscopy in living cells

Fluorescent protein-based FRET is a powerful method for visualizing protein-protein interactions and biochemical reactions in living cells. It can be difficult, however, to avoid photobleaching when observing fluorescent cells under the microscope, especially those expressing CFP. We compared the sensitivity of two protein-based FRET pairs to light-induced fluorescence changes in the donor, on FRET determination by fluorescence lifetime imaging microscopy (FLIM). Thanks to the very low excitation light levels of the time- and space-correlated single photon counting (TSCSPC) method, FLIM acquisitions were achieved without donor photobleaching. Here, we show that photobleaching of CFP by a mercury lamp under the microscope induced a decrease in the mean fluorescence lifetime, which interfered with FRET determination between CFP and YFP. Importantly, the range of light-induced variation of the mean fluorescence lifetime of CFP was not proportional to the decrease in the steady state fluorescence intensity and varied from cell to cell. The choice of the CFP/YFP pair therefore requires that the cells be observed and analyzed at very low light levels during the whole FRET experiment. In contrast, the GFP/mCherry pair provided an accurate FRET measurement by FLIM, even if some GFP photobleaching took place. We thus demonstrate that CFP can be an unreliable donor for FRET determination in living cells, due to its photosensitivity properties. We demonstrate that the GFP/mCherry pair is better suited for FRET measurement by FLIM in living cells than the CFP/YFP pair.     

Modification of the electric properties of molecular devices via gradual increase of number of nitrogen atoms: A computational study

This paper introduces a new means to manipulate electronic structures and, consequently, the electrical properties of molecular devices via gradual increase of number of nitrogen atoms in the backbone of conjugated organic molecular systems. Diblock molecules were selected for this purpose. Density functional theory (DFT) was used to investigate geometrical and electronic structures in the absence and presence of external electric field. Furthermore, the tendency of the anchor sulfur atoms toward electrodes in a simulated closed circuit was estimated from the relative condensed Fukui function. The obtained results indicated that HOMO–LUMO gap decreases steadily with increasing the number of nitrogen atoms, which would be used as a means for modifying the electrical properties in a regular mode.     

Thermal performance and energy saving investigation in a modified baseboard radiator and compare it with conventional heating systems—Experimental and CFD approach

In the present work, thermal performance of a new modified baseboard radiator is investigated experimentally based on the European Standard EN-442. Temperature distribution and thermal comfort conditions of the floor heating system and panel radiator is compared with the present system numerically. To validation of the simulation results, a comparison has been made between the simulation and the experimental obtained results. Comparison shows that there is a good agreement between them. The heat output rate of the new system increased about 46.06% compared with conventional baseboard radiant model and also the baseboard heating system is capable of providing better thermal comfort conditions than two other systems. Energy consumption in three systems is investigated experimentally by smart temperature control mechanism. Results show that energy consumption in the baseboard radiant is 83.03% and 55.96% lower than floor heating system and panel radiator, respectively.     

Product properties of a two-phase magneto-electric composite: Synthesis and numerical modeling

Magneto-electric (ME) materials are of high interest for a variety of advanced applications like in data storage and sensor technology. Due to the low ME coupling in natural materials, composite structures become relevant which generate the effective ME coupling as a strain-mediated product property. In this framework, it seems to be possible to achieve effective ME coefficients that can be exploited technologically. The present contribution investigates the realization of particulate ME composites with a focus on their experimental and computational characterization. We will show that different states of pre-polarizations of the ferroelectric material have a decisive influence on the overall obtainable ME coefficient. Details on the synthesis of two-phase composite microstructures consisting of a barium titanate matrix and cobalt ferrite inclusions will be discussed. Subsequently we will employ computational homogenization in order to determine the effective properties of the experimental composite numerically. We investigate the influence of different states of pre-polarization on the resulting ME-coefficients. For the numerical incorporation of the pre-polarization we use a heuristic method.