Superabsorbent hydrogel based on modified polysaccharide for removal of Pb2+ and Cu2+ from water with excellent performance

This contribution describes the absorption percentage of Pb²⁺ and Cu²⁺ from water by a superabsorbent hydrogel matrix (SH) made from an anionic polysaccharide copolymerized with acrylic acid (AAc) and acrylamide (AAm). Metal‐absorption tests, upon sequential pH variation, indicated that the SH has pH‐sensitivity for the absorption of both metals from solution, attributed to the functional ionic groups (? COOH) present in the AAc and arabic gum (AG) segments. At the pH 5.0, the SH exhibited good absorption capacity: 73.10% for Pb²⁺, 81.99% for Cu²⁺ in water and 63.64% for Pb²⁺, and 76.67% for Cu²⁺ in saline water with 0.1 mol kg^?1 ionic strength. A replicated 2² full factorial design with a central point was built to evaluate the maximum absorption capacity of the metals into the SH. It was found that both the interaction and main effects of the pH and the initial concentration of metal solution on absorption percentage of the metals were statistically significant. Surface response plots indicated that the absorption capacity of both metals into the SH may be appreciably improved by using the solutions with lower initial concentration of metal and with higher pH values. Metal‐absorption results demonstrated that the SH is a convenient material for absorption of Pb²⁺ and Cu²⁺ from pure aqueous and saline aqueous environments. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Experimental design to evaluate properties of electrospun fibers of zein/poly (ethylene oxide) for biomaterial applications

The production of polymer fibers from the combination of zein and PEO might have great potential in the field of biomaterial. Zein/PEO fibers were obtained in this work through solution electrospinning. An experimental design, 2^4-1, was used for evaluating the influences of PEO content in the blend, distance from the needle tip to the collector, applied electric voltage and solution flow for average fiber diameter and relative-yield process. Beyond this, the relationship between PEO content in the blend and the fiber properties were evaluated through FTIR, DSC, TG, tensile tests, and cytotoxic tests. The factor that exerts the greatest effect on the average fiber diameter response was the electrical voltage. The increase in PEO content in the blend decreased the thermal stability and increased the degree of the fibers' crystallinity. The mechanical tests showed that fibers with higher elongation were obtained at richer PEO blends. The fibers presented cytocompatible characteristics.     

Experience with model-based performance, reliability, and adaptability assessment of a complex industrial architecture

In this paper, we report on our experience with the application of validated models to assess performance, reliability, and adaptability of a complex mission critical system that is being developed to dynamically monitor and control the position of an oil-drilling platform. We present real-time modeling results that show that all tasks are schedulable. We performed stochastic analysis of the distribution of task execution time as a function of the number of system interfaces. We report on the variability of task execution times for the expected system configurations. In addition, we have executed a system library for an important task inside the performance model simulator. We report on the measured algorithm convergence as a function of the number of vessel thrusters. We have also studied the system architecture adaptability by comparing the documented system architecture and the implemented source code. We report on the adaptability findings and the recommendations we were able to provide to the system’s architect. Finally, we have developed models of hardware and software reliability. We report on hardware and software reliability results based on the evaluation of the system architecture.     

Influence of heat-treatment environment on Ni-ferrite nanoparticle formation from coconut water precursor

The kinetics of formation of NiFe₂O₄ nanoparticles were investigated where the nanoparticles were produced by the proteic-sol–gel method using coconut water followed by annealing in (i) air, (ii) air in the presence of boron nitride (BN), or (iii) nitrogen. The sample dried at 473 K for 5.5 h was composed of small disordered NiFe₂O₄ nanoparticles in a superparamagnetic state as determined from Mössbauer spectroscopy. In general, heat treatment at high temperature leads to a nanocomposite rich in NiFe₂O₄. In air, annealing at 1173 K for 8 h favored the formation of the magnetically ordered NiFe₂O₄ inverse spinel structure, with bulk characteristics and average crystal sizes of approximately 66 nm. In a nitrogen atmosphere and in compacted BN powder under air atmosphere, the NiFe₂O₄ spinel structure stabilized for temperatures up to 873 and 773 K, respectively, however, decomposition of the NiFe₂O₄ phase into other undesired structures was observed above 873 K.     

Highly translucent nanostructured glass-ceramic

Transparent and translucent glass-ceramics (GCs) are found in an increasing number of domestic and high-technology applications. In this paper, we evaluated and optimized the effects of two-stage heat treatments on the resulting crystalline phases and microstructure of a glass of the SiO₂–Li₂O–P₂O₅–TiO₂–CaO–ZnO–Al₂O₃ system. The objective was to develop a transparent nanostructured glass-ceramic (GC). After numerous heat treatment trials, we found that a long nucleation period of 72 h at 455 °C followed by a crystal growth treatment at 660 °C for 2 h resulted in a highly translucent GC having homogenously distributed nanocrystals. The relatively high amount of P₂O₅ (2.5 mol%) induced the formation of lithium disilicate as the main crystal phase. We thus developed a GC having crystals under 50 nm, with a high crystallized fraction (52%vol. Li₂Si₂O₅ and 26% vol Li₂SiO₃), transmittance of approximately 80% in the visible spectrum for 1.2 mm thick specimens, nano hardness of 8.7 ± 0.1 GPa (load of 400 mN), a high elastic modulus of 138 ± 3 GPa as measured by nanoindentation, and good flexural strength (350 ± 40 MPa) as measured by ball-on-3 balls tests. Due to its high content of Li⁺, this GC has the potential to be chemically strengthened and can be further developed to be used in a number of applications, such as on displays of electronic devices.     

Sustained release of potassium diclofenac from a pH‐responsive hydrogel based on gum arabic conjugates into simulated intestinal fluid

This work describes the preparation, the swelling properties and the potassium diclofenac (KDF) release profile of hydrogels of gum arabic (GA), N′,N′‐dimethylacrylamide, and methacrylic acid. In order to convert GA into a hydrogel, the polysaccharide was vinyl‐modified with glycidyl methacrylate. The hydrogels showed pH‐responsive swelling changes, which were more expressive in the basic environment. Release data of KDF were adjusted to a diffusion‐based kinetic model that provides an important insight on affinity of the drug for hydrogel and solvent, which may be the leading parameter for release of guest molecules from polymers. The KDF release from the hydrogels into simulated intestinal fluid decreases when the amount of modified GA increases. This was demonstrated to be due to the higher affinity of KDF for GA‐richer hydrogel, which makes the anti‐inflammatory release less favorable. The analysis of released drug half‐time (t_1/2 = 16.10 and 21.51 h) indicated sustained release characteristics. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43319.     

Binding of Sulpiride to Seric Albumins

The aim of this work was to study the interaction of sulpiride with human serum albumin (HSA) and bovine serum albumin (BSA) through the fluorescence quenching technique. As sulpiride molecules emit fluorescence, we have developed a simple mathematical model to discriminate the quencher fluorescence from the albumin fluorescence in the solution where they interact. Sulpiride is an antipsychotic used in the treatment of several psychiatric disorders. We selectively excited the fluorescence of tryptophan residues with 290 nm wavelength and observed the quenching by titrating HSA and BSA solutions with sulpiride. Stern-Volmer graphs were plotted and quenching constants were estimated. Results showed that sulpiride form complexes with both albumins. Estimated association constants for the interaction sulpiride–HSA were 2.20 (±0.08) × 10⁴ M⁻¹, at 37 °C, and 5.46 (±0.20) × 10⁴ M⁻¹, at 25 °C. Those for the interaction sulpiride-BSA are 0.44 (±0.01) × 10⁴ M⁻¹, at 37 °C and 2.17 (±0.04) × 10⁴ M⁻¹, at 25 °C. The quenching intensity of BSA, which contains two tryptophan residues in the peptide chain, was found to be higher than that of HSA, what suggests that the primary binding site for sulpiride in albumin should be located next to the sub domain IB of the protein structure.     

Characterization of novel thermoresponsive poly(butylene adipate-co-terephthalate)/poly(N-isopropylacrylamide) electrospun fibers

Polymer Bulletin - In this work, electrospun fibers of poly(butylene adipate-co-terephthalate) (PBAT) and poly(N-isopropylacrylamide) (PNIPAAm) blends, PBAT/PNIPAAm, with different mass ratios,...     

Dual-network hydrogels based on chemically and physically crosslinked chitosan/chondroitin sulfate

The formation of a novel type of hydrogel that combines chemically and physically crosslinked networks in a dual-network approach is presented here. Chitosan (CHT) and chondroitin sulfate (CS) were chemically modified with glycidyl methacrylate (GMA) and then crosslinked. The chemical hydrogels (CHT- and CS-gel) were deposited in different vials filled with CS or CHT stock solutions to form the dual-network hydrogels. FTIR, TGA and XRD analyses were used to characterize the chemical and the dual-network hydrogels. The percentages of CS or CHT complexed to the CHT- and CS-gel networks were calculated from the HPLC data. SEM images and swelling assays indicated that the formation of a secondary network by polyelectrolyte complexation changes the morphologies and liquid uptake capacities of the chemical hydrogels. Hence, the data and discussion presented here enable the formation of dual-network hydrogels with very interesting properties, such as the ability to interact with charged specimens (i.e., drugs, proteins or metal ions), a desirable feature for a wide range of applications.     

Cholesterol and fatty acids profile of Brazilian commercial chicken giblets

This study was carried out to determine the chemical composition, cholesterol contents and fatty acids profile of Brazilian commercial chicken giblets. The analysis were performed in gizzard, liver and heart in natura and also in cooked gizzard, fried liver and roasted heart. Fat and cholesterol contents ranged from 0.88% and 72.68 mg/100 g, in cooked gizzard, to 22.19% and 213.18 mg/100 g, in roasted heart. As the fat content gets higher, so does the cholesterol content. Palmitic (C16:0) and stearic acids (C18:0) were the predominant saturated fatty acids (SFA). The C16:0 ranged from 6.39% in cooked gizzard to 18.51% in fried liver. The C18:0 level ranged from 6.62% in roasted heart to 19.19% in cooked gizzard. Linoleic acid (C18:2 omega 6) was the predominant polyunsaturated fatty acid (PUFA). The data revealed that the three different analysed giblets presented a good PUFA/SFA ratio, with values of 1.11, 1.14 and 1.40 for cooked gizzard, fried liver and roasted heart, respectively.