Albumin stimulates lysophosphatidic acid acyltransferase activity in T-lymphocyte membranes

Phosphatidic acid (PtdOH) and lysophosphatidic acid (lysoPtdOH) have been shown to enhance T-lymphocyte function. However, the FA preference and influence of acyl-CoA binding proteins on lysoPtdOH and PtdOH biosynthesis are not known. Therefore, we determined glycerol-3-phosphate acyltransferase (GPAT) and lysophosphatidic acid acyltransferase (LAT) activity in rat T-lymphocyte and liver membrane preparations in the presence of palmitoyl-CoA and oleoyl-CoA with or without BSA. We found two different properties of GPAT and LAT in whole T-lymphocyte membrane preparations relative to liver. First, T-lymphocyte basal GPAT and LAT activities were similar, whereas in liver membranes LAT activity was 10-fold higher than GPAT. Second, T-lymphocyte LAT, but not GPAT, activity was inducible (fivefold) by the addition of albumin in the presence of palmitoyl-CoA but not oleoyl-CoA. In contrast, albumin stimulated GPAT, but not LAT, activity in liver membranes in the presence of palmitoyl-CoA. These results show, for the first time, that T-lymphocyte LAT activity can be increased by the presence of an acyl-CoA binding protein, which may indicate a new important control mechanism for regulating intracellular lysoPtdOH and PtdOH levels in T-lymphocytes.     

Foley catheters functionalised with a synergistic combination of antibiotics and silver nanoparticles resist biofilm formation

Foley catheters are inevitable in health care unit. Pathogens colonise and form biofilm on catheter causing catheter‐associated urinary tract infection. Therefore, the authors aimed to functionalise catheter to resist biofilm formation. The authors impregnated urinary catheters with a synergistic combination of antibiotics and silver nanoparticles (SNPs) to evaluate antibiofilm efficacy in vitro and in vivo. SNPs were synthesised using Spirulina platensis. Synergy between the SNPs and antibiotics was determined by the checker‐board method. In vivo efficacy of the functionalised catheters was assessed in mice. Liver and kidney function tests of mice were performed. The in vitro anti‐adherence activity of the functionalised catheters was evaluated after 2 years. Nanoparticle sizes were 42–75 nm. Synergistic activity was observed among SNPs (2 µg/ml), amikacin (6.25 µg/ml), and nitrofurantoin (31.25 µg/ml). In mice, catheters functionalised with combinations of antibiotics and SNPs exhibited no colonisation until Day 14. Blood, liver, and kidney tests were normal. After 2 years, catheters functionalised with antibiotics exhibited 25% inhibition of bacterial adhesion, and catheters functionalised with the nanoparticle‐antibiotic combination exhibited 90% inhibition. Impregnation of urinary catheters with a synergistic combination of antibiotics and SNPs is an efficient and promising method for preventing biofilm formation.Inspec keywords: catheters, drugs, silver, nanoparticles, nanomedicine, liver, kidney, blood, microorganisms, adhesion, biomechanics, cellular biophysicsOther keywords: Foley catheters, synergistic nanoparticle‐antibiotics combination, silver nanoparticles, biofilm formation resitance, health care unit, pathogens, urinary tract infection, SNP, Spirulina platensis, checker‐board method, liver function, kidney function, vitro antiadherence activity, amikacin, nitrofurantoin, blood, bacterial adhesion, size 42 nm to 75 nm, Ag     

Cross-layer based congestion detection and routing protocol using fuzzy logic for MANET

Mobile Ad hoc Networks (MANET) is made up of mobile devices which form an infrastructure-less network. In MANET, the devices can change its location and configure itself at any time. Hence, there is a possibility for the network to be prone to abnormal network events due to certain factors like error in the links, overflow in the buffers, layers, and so forth. So, in this paper, a cross-layer based congestion detection and routing protocol is proposed using Fuzzy logic. In this protocol, whenever a network event occurs, the kind of event occurring is recognized in order to handle it accordingly. Next, the alternate routes for data transmission are determined by applying the concept of fuzzy logic on some of the critical factors. Based on the fuzzy inference rules, appropriate routes are selected and data messages are transmitted successfully.     

Tool materials influence on surface roughness and oversize in machining glass fiber reinforced polypropylene (GFR-PP) composites

Glass fiber reinforced Polypropylene (GFR-PP) is used in manufacturing industries like bicycles, auto bodies, aircraft, and civil applications due to superior properties. Machining of fiber-reinforced plastics is problematic especially when drilling due to their inherent in-homogeneity, anisotropy and limited plastic deformation. Drilling is often required to facilitate the assembly of the parts to get the final products. Surface quality in drilled composites is an essential design characteristic in many situations, such as accurate fits, aesthetic requirements, etc. The present work deals with detailed investigation on the influence of tool materials and machining parameters during drilling of GFR-PP composite material. The study mainly focused on machined surface quality such as surface roughness of the drilled hole and dimensional inaccuracies such as oversize of the hole. The better dimensional and surface quality of drilled hole is observed from solid carbide drill with a spindle speed of 2500?rpm and a feed rate of 0.05?mm/rev. Regression model is developed using experimental data for estimating the surface roughness and oversize. The developed model has high R-sq value which shows the strong relationship between the model and the response variables. The effect of drilling process parameters and associated interactions are discussed in detail.     

Surface modification and characterization of zirconium carbide particulate reinforced C70600 CuNi composite fabricated via friction stir processing

In the present research work, Friction stir processing (FSP) technique has been applied to develop a C70600 graded copper-nickel (CuNi) Surface metal matrix composite (SMMC) reinforced with and without addition of ZrCp. Rotational and traverse speeds were set as 1200 rpm and 30 mm/min, respectively. The fabricated SMMC were metallurgically characterized by using Optical microscope (OM) and Field emission scanning electron microscope (FESEM). The homogeneous distribution of ZrC particles and good interfacial bonding between matrix/reinforcement were observed via OM and FESEM microscopes. The microhardness of the CuNi/ZrC surface composite was observed by using microhardness tester at the cross section of the sample. The average higher microhardness of 148 Hv at CuNi/ZrC SMMC and lower microhardness of 115 Hv at FSPed CuNi was found. The Ultimate tensile strength (UTS) value was measured by using micro tensile testing machine. The UTS value of CuNi/ZrC composite and FSPed CuNi were observed to be 310 MPa and 302 MPa, respectively. The mode of fracture was also observed via FESEM. The X-ray diffraction (XRD) test was carried out to confirm the presence of CuNi & ZrC in the SMMC layer.     

MADE3D: Enabling the next generation of high-torque density wind generators by additive design and 3D printing

Forschung im Ingenieurwesen - Direct-drive wind turbine generators are increasing in popularity, thanks to recent project developments—especially offshore, where reliability and efficiency...     

Cytopathological and ultrastructural changes in the male reproductive organs of freshwater crab Paratelphusa jacquemontii (Rathbun) exposed to nurocombi

Accumulation of pollutants in the aquatic system has a high impact on the reproductive physiology of crustaceans. The objective of the present study was to assess the possible histopathological effects of combined chlorpyrifos and cypermethrin (nurocombi) exposure on reproductive tissue in male freshwater crab Paratelphusa jacquemontii using light and electron microscopy. The testis of experimental crabs showed disorganization of testicular lobules, increased inters cellular space, necrosis, and cellular damage in both germinal cells and Sertoli cells. The treated vas deferens exhibited epithelial degeneration, misshaped spermatophores, decline in the number of spermatophores, and dehiscence of spermatophore wall. These clinical manifestations expressed in crabs following the exposure of nurocombi significantly reduce the testicular activity and substantially inhibits the seminal secretions, which ultimately lead to impairment of reproduction.     

Use of Sb spray for improved performance of InAs/GaAs quantum dots for novel photovoltaic structures

Photoluminescence output from InAs/GaAs quantum dots has been improved by a Sb treatment immediately prior to capping with GaAs. Spectra taken at 300 and 80 K show a significant increase in output intensity when the quantum dots are exposed for 15 s under a Sb flux of approximately 0.1 monolayers per second, but this improvement is lost when the Sb exposure is extended to 30 s. There is no significant shift in the emission energies between samples indicating strain relief due to the cap layer is not responsible for the improvement. Analysis of temperature dependent photoluminescence taken between 80 and 300 K show increased activation energies at lower temperatures when an Sb spray is used, suggesting passivation of deep defect levels. For the higher temperature activation energy, corresponding to carrier escape from the QD to the barrier, whilst a 15 s Sb spray gives a substantial increase, the longer 30 s Sb spray sees the activation energy decrease, a result deduced to be due to Sb segregation providing shallow defect levels. A band structure including a very thin GaAsSb layer adjacent to the quantum dots is used to explain these results, with the 30 s Sb spray leading to shallow Sb segregation related defects and a lower activation energy. Depth dependent X-ray photoelectron spectroscopy data support the band structure proposed to explain the photoluminescence results and also reveals the highest concentration of Sb at the sample surface suggesting a ‘floating layer’ of Sb during growth of the GaAs cap. Some of the implications of these results, for growth of quantum dot samples and for two novel solar cell proposals, the intermediate band and hot carrier solar cells, are discussed.