Multiply Charged Conjugated Polyelectrolytes as a Multifunctional Interlayer for Efficient and Scalable Perovskite Solar Cells

A series of anionic conjugated polyelectrolytes (CPEs) is synthesized based on poly(fluorene-co-phenylene) by varying the side-chain ionic density from two to six per repeat units (MPS2-TMA, MPS4-TMA, and MPS6-TMA). The effect of MPS2, 4, 6-TMA as interlayers on top of a hole-extraction layer of poly(bis(4-phenyl)-2,4,6-trimethylphenylamine (PTAA) is investigated in inverted perovskite solar cells (PeSCs). Owing to the improved wettability of perovskites on hydrophobic PTAA with the CPEs, the PeSCs with CPE interlayers demonstrate a significantly enhanced device performance, with negligible device-to-device dependence relative to the reference PeSC without CPEs. By increasing the ionic density in the MPS-TMA interlayers, the wetting, interfacial defect passivation, and crystal growth of the perovskites are significantly improved without increasing the series resistance of the PeSCs. In particular, the open-circuit voltage increases from 1.06 V for the PeSC with MPS2-TMA to 1.11 V for the PeSC with MPS6-TMA. The trap densities of the PeSCs with MPS2,4,6-TMA are further analyzed using frequency-dependent capacitance measurements. Finally, a large-area (1 cm²) PeSC is successfully fabricated with MPS6-TMA, showing a power conversion efficiency of 18.38% with negligible hysteresis and a stable power output under light soaking for 60 s.     

On teletraffic applications to OBS

We provide teletraffic models for loss probability evaluation of optical burst switching (OBS). We show that the popular Engset formula is not exact for OBS modeling and demonstrate that in certain cases it is not appropriate. A new exact model is provided. The various models are compared using numerical results for various OBS alternatives with and without burst segmentation.     

Improvement in hydrogen storage characteristics of magnesium by mechanical alloying with nickel

The hydriding and dehydriding kinetics of Mg are reviewed. It is reported that the hydriding and dehydriding reactions of Mg are nucleation-controlled under certain conditions and progress by a mechanism of nucleation and growth, and that the hydriding rates of Mg are controlled by the diffusion of hydrogen through a growing Mg hydride layer.The hydriding and dehydriding kinetics of Mg can be improved in consequence by a treatment such as mechanical alloying, which can facilitate the nucleation by creating defects and shorten diffusion distances by reducing the effective particle size of Mg.The hydriding and dehydriding characteristics of mechanically-treated Mg and mechanically-alloyed mixtures with the compositions Mg-x wt Ni (x=5, 10,25 and 55) are studied.The Mg₂Ni phase develops in the mechanically-alloyed mixtures. The Mg-10wt% Ni and Mg-25 wt% Ni mixtures are activated easily, show much larger hydrogen storage capacities and much higher hydriding rates, and higher dehydriding rates, than other magnesium- based alloys or mixtures.     

New queueing strategies employing service interval-based priority for real-time communications in atm networks

In this paper, we propose queueing strategies employing the service interval-based priority (sip) which can provide delay-bounded, and loss-free services, while maximizing bandwidth utilization in the atm network. We also describe a variation of the sip, the residual service interval-based priority (rsip) which can achieve almost full utilization by assigning priorities dynamically on the basis of the residual service interval. We store the realtime cells belonging to different connections in logically separated queues, and for each queue, we set a parameter called service interval, during which only one cell is allowed to be transmitted. The sip server takes and transmits the head-of-line (hol) cell of the queue which has the smallest service interval, while the rsip server selects the queue with the smallest residual service interval. When there is no eligible real-time cell, it transmits non-real-time cell, thus enabling a maximized bandwidth utilization. Employing the above queueing strategies, we analyze the delay characteristics deterministically with the leaky bucket bounded input traffic and then dimension the optimal service interval. In dimensioning the service interval and buffer space of each real-time service queue, we consider burstiness of traffic in conjunction with delay constraints, so that bandwidth utilization can get maximized. In addition, we consider the issues of protection from malicious users, average bandwidth utilization, and coupling between the delay bound and the bandwidth allocation granularity.     

Recent advances in theory and applications of scrambling techniquesfor lightwave transmission

This paper discusses recent advances in the theory and applications of scrambling techniques for digital lightwave transmission. It introduces the theories of sequence space and shift register generator (SRG) space which enable systematic analysis and mathematical manipulation of the behavior of sequences in general and the related SRG's. It discusses the behavior and realization of frame synchronous scrambling (FSS) and distributed sample scrambling (DSS) with emphasis on parallel sequences and the related parallel SRG's (PSRG). In addition, it describes self synchronous scrambling (SSS). Then the paper applies the theories to today's lightwave transmission systems by demonstrating practical parallel designs of FSS for SDH/SONET transmission, DSS for cell-based ATM transmission, and SSS for SDH-based ATM transmission. It finally considers how DSS can be used for scrambling of mixed isochronous and nonisochronous data in future high-speed data networks. The paper employs various new concepts and terminology, such as PSRG engine, generating vector discrimination matrix, (M,N) PSRG, sampling vector, correction vector, correction matrix, predictable scrambling concurrent sampling, and immediate correction     

Vertex-based inter-frame boundary encoding scheme

The boundary is approximated by a polygon which can be encoded with the smallest number of bits for maximum distortion. The temporal redundancy between two successive frames is efficiently removed with the proposed scheme, resulting in a lower bit rate than the conventional algorithms     

On the modelling of scalar and mass transport in combustor flows

The results of a numerical study of swirling and non-swirling combustor flows with and without density variations are presented. Constant-density arguments are used to justify closure assumptions invoked for the transport equations for turbulent momentum and scalar fluxes, which are written in terms of density-weighted variables. Comparisons are carried out with measurements obtained from three different axisymmetric model combustors. The three experiments cover recirculating flow, swirling flow and variable-density, swirling flow inside model combustors. Together, they offer wide ranging flow conditions to test the validity of the models. Results show that the Reynolds stress/flux models do a credible job of predicting constant-density, swirling and non-swirling combustor flows with passive scalar transport. However, their improvements over algebraic stress/flux models are marginal. The extension of the constant-density models to variable-density flow calculations shows that the models are equally valid for such flows. Therefore, the present results argue well for the adoption of constant-density models for variable-density flows until a successfully validated variable-density model is available.