A new adaptation of mapping method to study mixing of multiphase flows in mixers with complex geometries

The main objective of the present work is to modify the traditional mapping method for the simulation of distributive mixing of multiphase flows in geometries involving moving parts such as, internal mixers or twin-screw extruders without a limitation on their geometrical periodicity. The periodicity condition, limits the results of traditional mapping method to tracking mapping mesh between specific discrete time intervals or distances for that geometry is repeated, hence, result is only for fixed orientation of rotors. Imaginary domain method is introduced to track mapping mesh from one state to the next free of geometrical periodicity limitations. In this work the method is introduced and its applicability and accuracy is discussed in details. A two-dimensional (2D) simulation of mixing of two Newtonian fluids with different viscosities in an intermeshing internal mixer is used as a test case study. In this example the key issues of ability to predict mixing state in details for all orientations of rotors is presented. To reduce diffusion errors of mapping method in the boundaries of the rotors, mapping mesh refinement technique that relies upon one single reference mesh is also presented.     

Predicting the compressibility factor of natural gas

Knowing compressibility factor (z-factor) values of natural gases is the basis of most petroleum engineering calculations. Shortage of available experimental data for the specified composition, temperature, and pressure conditions encourages researchers to propose efficient equations for calculating z-factor values.

This investigation presents a useful empirical model for determining natural gases compressibility factor values. The advantages of this correlation are that it is explicit in terms of z-factor and the results of calculating compressibility factor values by this method reveal the supremacy of the new equation over the other widely used correlations.     

Minimum achievable phase noise of RC oscillators

To make RC oscillators suitable for RF applications, their typically poor phase-noise characteristics must be improved. We show that, for a given power consumption, this improvement is fundamentally limited by the fluctuation-dissipation theorem of thermodynamics. We also present the analytical formulation of this limit for relaxation (including ring) oscillators using a time-domain phase-noise analysis method which is introduced in this paper. Measurement shows the maximum possible improvement is generally less than 6dB for ring oscillators, while it can be as high as 21dB for other relaxation oscillators. The suboptimal performance of relaxation oscillators is attributed to the continuous current flow in these oscillator topologies. These results provide useful insight for feasibility studies of oscillator design.     

Intelligent wireless mesh path selection algorithm using fuzzy decision making

Wireless mesh networks (WMNs) are expected to be widely deployed due to their ability to provide ubiquity, convenience, cost-efficiency, and simplicity for both service providers and end-users. Recently, the IEEE 802.11s standard introduces the hybrid wireless mesh protocol (HWMP) which is inspired by a combination of on-demand and tree-based pro-active routing algorithms. In this paper, we argue that the proposed unimetric path selection algorithm in the standard is not reliable. We introduce and examine a novel multimetric wireless mesh path selection algorithm using fuzzy decision making under realistic wireless channel conditions. The proposed path selection algorithm is designed to improve the performance of both re-active and pro-active routing protocols of HWMP for not only single-channel but also multi-channel WMNs. The reported results show the superior performance of the proposed path selection algorithm in terms of delay and packet delivery ratio without increasing overhead significantly. Although some fuzzy-based routing algorithms have been defined in literature recently, to the best of our knowledge, this paper is the first one to introduce and examine the use of fuzzy logic in the path selection of single- and multi-channel wireless local area network-based WMNs under realistic wireless channel conditions.     

Evaluation of performance enhancing proxies in internet over satellite

Performance enhancing proxies (PEPs) are widely used to improve the performance of TCP over high delay‐bandwidth product links and links with high error probability. In this paper we analyse the performance of using TCP connection splitting in combination with web caching via traces obtained from a commercial satellite system. We examine the resulting performance gain under different scenarios, including the effect of caching, congestion, random loss and file sizes. We show, via analysing our measurements, that the performance gain from using splitting is highly sensitive to random losses and the number of simultaneous connections, and that such sensitivity is alleviated by caching. On the other hand, the use of a splitting proxy enhances the value of web caching in that cache hits result in much more significant performance improvement over cache misses when TCP splitting is used. We also compare the performance of using different versions of HTTP in such a system. Copyright © 2003 John Wiley & Sons, Ltd.     

Stabilized finite elements for time-harmonic waves in incompressible and nearly incompressible elastic solids

The propagation of waves in elastic solids at or near the incompressible limit is of interest in many current and emerging applications. Standard low-order Galerkin finite element discretization struggles with both incompressibility and wave dispersion. Galerkin least squares stabilization is known to improve computational performance of each of these ingredients separately. A novel approach of combined pressure-curl stabilization is presented, facilitating the use of continuous, equal-order interpolation of displacements and pressure. The pressure stabilization parameter is determined by stability considerations, while the curl stabilization parameter is determined by dispersion considerations. The proposed pressure-curl–stabilized scheme provides stable and accurate results on a variety of numerical tests for incompressible and nearly incompressible elastic waves computed with linear elements.     

A Secure Communication Protocol for Unmanned Aerial Vehicles

Mavlink is a lightweight and most widely used open-source communication protocol used for Unmanned Aerial Vehicles. Multiple UAVs and autopilot systems support it, and it provides bi-directional communication between the UAV and Ground Control Station. The communications contain critical information about the UAV status and basic control commands sent from GCS to UAV and UAV to GCS. In order to increase the transfer speed and efficiency, the Mavlink does not encrypt the messages. As a result, the protocol is vulnerable to various security attacks such as Eavesdropping, GPS Spoofing, and DDoS. In this study, we tackle the problem and secure the Mavlink communication protocol. By leveraging the Mavlink packet’s vulnerabilities, this research work introduces an experiment in which, first, the Mavlink packets are compromised in terms of security requirements based on our threat model. The results show that the protocol is insecure and the attacks carried out are successful. To overcome Mavlink security, an additional security layer is added to encrypt and secure the protocol. An encryption technique is proposed that makes the communication between the UAV and GCS secure. The results show that the Mavlink packets are encrypted using our technique without affecting the performance and efficiency. The results are validated in terms of transfer speed, performance, and efficiency compared to the literature solutions such as MAVSec and benchmarked with the original Mavlink protocol. Our achieved results have significant improvement over the literature and Mavlink in terms of security.     

Out-of-Plane Flexural Performance of GFRP-Reinforced Masonry Walls

The objective of this paper is to assess the out-of-plane flexural performance of masonry walls that are reinforced with glass fiber-reinforced polymers (GFRPs) rods, as an alternative for steel rebars. Eight 1?m×3?m full-scale walls were constructed using hollow concrete masonry units and tested in four-point bending with an effective span of 2.4 m between the supports. The walls were tested when subjected to increasing monotonic loads up to failure. The applied loads would represent out-of-plane loads arising from wind, soil pressure, or inertia force during earthquakes. One wall is unreinforced; another wall is reinforced with customary steel rebars; and the other six walls are reinforced with different amounts of GFRP reinforcement. Two of the GFRP-reinforced walls were grouted only in the cells where the rods were placed to investigate the effect of grouting the empty cells. The force-deformation relationship of the walls and the associated strains in the reinforcement were monitored throughout the tests. The relative performance of different walls is assessed to quantify the effect of different design variables. The range of GFRP reinforcement ratios covered in the experiments was used to propose a capacity diagram for the design of FRP-reinforced masonry walls similar to that of reinforced concrete elements.     

Dynamic modeling of gas phase propylene homopolymerization in fluidized bed reactors

A new model with comprehensive kinetics for propylene homopolymerization in fluidized bed reactors was developed to investigate the effect of mixing, operating conditions, kinetic and hydrodynamic parameters on the reactor performance as well as polymer properties. Presence of the particles in the bubbles and the excess gas in the emulsion phase was considered to improve the two-phase model, thus, considering the polymerization reaction to take place in both the bubble and emulsion phases. It was shown that in the practical range of superficial gas velocity and catalyst feed rate, the ratio of produced polymer in the bubble phase to the total production rate is roughly between 10% and 13%, which is a substantial amount and cannot be ignored. Simulation studies were carried out to compare the results of the improved two-phase, conventional well-mixed and constant bubble size models. The improved two-phase and well mixed models predicted a narrower and safer window at the same running conditions compared with the constant bubble size model. The improved two-phase model showed close dynamic behavior to the conventional models at the beginning of polymerization, but starts to diverge with the evolution of time.