Methacrylic acid and dodecyl methacrylate (MAc‐DMA) hydrogel for enhanced catalytic activity of lipase of Bacillus coagulans MTCC‐6375

An alkaline thermotolerant bacterial lipase of Bacillus coagulans MTCC‐6375 was purified and immobilized on a methacrylic acid and dodecyl methacrylate (MAc‐DMA) hydrogel. The lipase was optimally bound to the matrix after 20 min of incubation at 55°C and pH 9 under shaking conditions. The matrix‐bound lipase retained approximately 50% of its initial activity at 70–80°C after 3 h of incubation. The immobilized lipase was highly active on medium chain length p‐nitrophenyl acyl ester (C: 8, p‐nitrophenyl caprylate) than other p‐nitrophenyl acyl esters. The presence of Fe³⁺, NH₄⁺, K⁺, and Zn²⁺ ions at 1 mM concentration in the reaction mixture resulted in a profound increase in the activity of immobilized lipase. Most of the detergents partially reduced the activity of the immobilized lipase. The immobilized lipase performed ～62% conversion in 12 h at temperature 55°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1420–1426, 2006     

Synthesis of ethyl propionate catalyzed by poly(N‐AEAAm‐co‐AAc)‐cl‐MBAm hydrogel‐immobilized lipase of Bacillus coagulans MTCC‐6375

A purified alkaline thermotolerant bacterial lipase of Bacillus coagulans MTCC‐6375 was efficiently immobilized onto poly(N‐AEAAm‐co‐AAc‐cl‐MBAm)‐hydrogel at pH 8.5 and at temperature 55°C in 16 h. The hydrogel‐bound matrix possessed 1.04 U/g (matrix) lipase activity with a specific activity of 1.8 U/mg of protein. The immobilized lipase resulted in formation of 52.5 mM of ethyl propionate (52% conversion) at 55°C in 9 h in n‐nonane. Ethanol and propionic acid when used in a ratio of 300 : 100 mM, respectively, in n‐nonane along with 10 mg of hydrogel‐bound lipase resulted in optimal synthesis of ethyl propionate (82.5 mM). Addition of molecular sieves (3 Å, 0.7 g/reaction volume) further enhanced the conversion rate to 82.4% resulting in 83.5 mM of ethyl propionate. Incubation temperature below or above 55°C had a marked effect on the synthesis of ethyl propionate. However, esterification performed in n‐heptane at 65°C resulted in 87.5 mM of ethyl propionate with a conversation rate of 89.3%. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Layered axial force coupled membrane based metal contact single-pole quad-throw RF MEMS switch: design,RF performance and mechanical modeling

Microsystem Technologies - RF MEMS is a perfect candidate to replace the conventional switches used for microwave frequency. Most of the RF MEMS switches developed generally concentrate on...     

Reliability evaluation and optimal design in heterogeneous multi-state series-parallel systems

This paper addresses the heterogeneous redundancy allocation problem in multi-state series-parallel reliability structures with the objective to minimize the total cost of system design satisfying the given reliability constraint and the consumer load demand. The demand distribution is presented as a piecewise cumulative load curve and each subsystem is allowed to consist of parallel redundant components of not more than three types. The system uses binary capacitated components chosen from a list of available products to provide redundancy so as to increase system performance and reliability. The components are characterized by their feeding capacity, reliability and cost. A system that consists of elements with different reliability and productivity parameters has the capacity strongly dependent upon the selection of constituent components. A binomial probability based method to compute exact system reliability index is suggested. To analyze the problem and suggest an optimal/near-optimal system structure, an ant colony optimization algorithm has been presented. The solution approach consists of a series of simple steps as used in early ant colony optimization algorithms dealing with other optimization problems and offers straightforward analysis. Four multi-state system design problems have been solved for illustration. Two problems are taken from the literature and solved to compare the algorithm with the other existing methods. The other two problems are based upon randomly generated data. The results show that the method can be appealing to many researchers with regard to the time efficiency and yet without compromising over the solution quality.     

Biochemical and nutritional characteristics of non-conventional protein sources

Some nutritional and antinutritional characteristics of Cucumis sativus L and Lagenaria vulgaris (Molina) Standl seeds ere studied. The mature seed kernels contained 312–318 g kg^?1 crude protein, 9–10 g kg^?1 crude fibre, 444–463 g kg^?1 crude fat, 43–45 g kg^?1 ash and 114–142 g kg^?1 carbohydrates. The biological values of cucumber and bottle gourd proteins ere 74.35 and 74.20 respectively. The essential amino acid profile compared ell ith the FAO/HO scoring pattern except for a deficiency of lysine and isoleucine. Lysine as the first limiting amino acid in both the proteins. The leucine:isoleucine and leucine:lysine ratios did not sho imbalance. Trypsin inhibitor, phytate, lectin and tannin levels ere determined in the defatted decorticated cucurbit seed meals. Heat treatment reduced the trypsin inhibitor and lectin activities in all samples to negligible levels. Levels of phytate and tannins ere found to be similar in all samples.     

Separation of strontium from low level radioactive waste solutions using hydrous manganese dioxide composite materials

⁹⁰Sr is one of the major isotopes present in the low level radioactive liquid waste (LLW) generated during operation of nuclear reactors and spent fuel reprocessing plants. A composite ion exchange material consisting of hydrous manganese oxide and poly methyl methacrylate (PMMA) was developed for removal of strontium from aqueous radioactive waste. The prepared composite material showed very good strontium adsorption properties in aqueous solutions. Sorption of strontium on the composite material as a function of pH, equilibration time and strontium ion concentrations were studied. The process of sorption of strontium from solution was analysed using different isotherm models like Langmuir, D-R and Freundlich. Four different error functions were employed to find out the most suitable isotherm model to represent the experimental data and it was found that Freundlich model best fits the sorption of strontium on the composite material. Analysis of the data obtained from the sorption kinetics studies showed that the data fitted better to the pseudo-second order kinetic model. Lab scale column performance study of the composite material revealed that the material could be effectively used in column operations to remove strontium from LLW solutions.