A selective encryption for H.264/AVC videos based on scrambling

H.264/Advanced Video Coding (H.264/AVC) is one of the video compression standards that is 50% more efficient than previously introduced standards. Given that the H.264/AVC standard is considered and used in a variety of video applications, it is essential to provide a suitable solution for video encryption with good security, high encryption speed, and to prevent bitrate increases. In this paper, we propose a method selective encryption of H.264/AVC for the digital rights management (DRM) applications. In this method, discrete cosine transform (DCT) coefficients, which affect the texture and content of the H.264/AVC video during compression, are encrypted after the zigzag scanning and based on Context-Adaptive Binary Arithmetic Coding (CABAC). The experimental results and encryption efficiency analysis demonstrate that the proposed method with the format compliance has good security and high encryption speed and it can prevent the bitrate from rising and is thus usable in industrial and the DRM applications.

     

Effects of Fe/SDS and Au nanoparticles on P. aeruginosa bacterial growth and biosurfactant production

The aim of this study was to evaluate the effects of iron (Fe)/SDS and gold (Au) nanoparticles on growth and biosurfactant production of Pseudomonas aeruginosa PBCC5. The concentrations of the nanoparticles used were 1, 500 and 1000 mg/l. In this research, the surface tension of biosurfactant, dry weight of biosurfactant and biomass, emulsification indexes (E₂₄) were measured and transmission electron microscopy analysis was used to monitor the nanoparticles. The test results showed that the effect of nanoparticles on the bacterial growth and biosurfactant production varied corresponding to the type and concentration of nanoparticles. Fe/SDS nanoparticles showed no bacterial toxicity when the concentration of nanoparticles was 1 mg/ml and increased the growth and biosurfactant production, 23.21 and 20.73%, respectively. While at higher concentrations (500, 1000 mg/l), the nanoparticles suppressed bacterial growth as well as biosurfactant production. Similarly, Au nanoparticles had no bacterial toxicity and also increased bacterial growth and biosurfactant production. The surface tensions of all samples decreased from 72 of distiled water to 32–35 mN/m.Inspec keywords: nanoparticles, iron, gold, nanofabrication, nanomedicine, surfactants, biomedical materials, surface tension, renewable materials, transmission electron microscopy, microorganismsOther keywords: Au nanoparticles, P. aeruginosa bacterial growth, biosurfactant production, Pseudomonas aeruginosa PBCC5, surface tension, biomass, emulsification indexes, dry weight, transmission electron microscopy, Fe‐SDS nanoparticles, distiled water, Fe, Au     

Effect of molybdenum on SCC of 17-4PH stainless steel under different aging conditions in chloride solutions

Type 17-4 PH martensitic precipitation-hardenable stainless steel, having a combination of high mechanical properties and good corrosion resistance is widely used in aerospace, chemical, and petrochemical and food industries This alloy has a high resistance to stress corrosion cracking but age hardening treatment, increases its sensitivity to stress corrosion cracking. There are several works investigating the influence of different aging treatments on the microstructure, mechanical properties and corrosion resistance of 17-4 PH steels, however there are little works studying the simultaneous effects of aging treatments and molybdenum content on corrosion properties of these steels. In this research, the effect of molybdenum on stress corrosion cracking resistance of 17-4 PH alloy using U-bend samples in chloride solutions, as well as its effect on passivity, has been investigated. Quantometer, Scanning Electron Microscope(SEM) and potentiostat were used to determine the chemical composition, microstructure and anodic polarization behavior of the alloys. It is found that molybdenum has a useful effect on stress corrosion cracking resistance under the peak aged conditions, and this is because of development of delta-ferrite phase by increasing the molybdenum content and subsequently decreasing the strength of the alloy.     

Solving a bi-objective cell formation problem with stochastic production quantities by a two-phase fuzzy linear programming approach

We propose a bi-objective cell formation problem with demand of products expressed in a number of probabilistic scenarios. To deal with the uncertain demand of products, a framework of two-stage stochastic programming model is presented. The proposed model considers minimizing the sum of the miscellaneous costs (machine constant cost, expected machine variable cost, cell fixed-charge cost, and expected intercell movement cost) and expected total cell loading variation. Because of conflicting objectives, we develop a two-phase fuzzy linear programming approach for solving bi-objective cell formation problem. To show the effectiveness of the proposed approach, numerical examples are solved and the results are compared with the two existing approaches in the literature. The computational results show that the proposed fuzzy method achieves lower objective functions as well as higher satisfaction degrees.     

Detection of individual activities in video sequences based on fast interference discovery and semi-supervised method

Multimedia Tools and Applications - Auto understanding of human activities in video is an increasing necessity in some application realms. The existing methods for human’s activity...     

Parallel‐series connected rectenna array using frequency selective surface (FSS) for power harvesting applications at 5.8 GHz

This article presents a frequency selective surface (FSS) and rectenna array in parallel‐series connection to harvest power of wireless power systems. To improve the basic antenna parameters, a frequency selective surface was mounted on the reverse side of the substrate. According to the results, the proposed method showed significant improvement in comparison to other methods in both single and rectenna array. Moreover, the conversion efficiency of the presented technique was increased to 76%. The output voltage of 4.5 and 9 V and the current of 60 and 120 mA were resulted for 5 and 10 rectenna units, respectively. The proposed arrays can be expanded to large scale integrated array without any significant degradation in conversion efficiency.     

Structural/texture evolution of CaO/MCM‐41 nanocatalyst by doping various amounts of cerium for active and stable catalyst: Biodiesel production from waste vegetable cooking oil

In present work, the aim of producing biodiesel from waste cooking oil was pursued by doping the cerium element into the MCM‐41 framework as catalyst with various Si/Ce molar ratio (5, 10, 25, 50, and Ce = 0). The catalytic performance and stability improved by employing the ultrasound irradiation in active phase loading step of catalyst preparation. The physicochemical characteristics of synthesized samples were investigated using various techniques as follows: Brunauer‐Emmett‐Teller (BET), X‐ray powder diffraction (XRD), Fourier transfer infrared (FTIR), energy‐dispersive X‐ray spectroscopy (EDX), transmission electron microscopy (TEM), and field emission scanning electron microscope (FESEM). The XRD patterns along with the results of FTIR and BET analysis revealed the MCM‐41 framework destruction while increasing the Ce content. The FESEM images of the nanocatalysts illustrated a well distribution and uniform morphology for the Ca/CeM (Si/Ce = 25). The particle size and size distribution of the Ca/CeM (Si/Ce = 25) were subsequently determined by TEM and FESEM images. The activity of fabricated nanocatalysts was evaluated by measuring the free acid methyl ester (FAME) content of produced biodiesel. The tests were carried out at constant operational conditions: T = 60°C, catalyst loading = 5 wt%, methanol/oil molar ratio = 9, and 6‐hour reaction time. A superior activity was observed for Ca/CeM (Si/Ce = 25) among other nanocatalysts with 96.8% conversion of triglycerides to biodiesel. The mentioned sample was utilized in five reaction cycles, and at the end of the fifth cycle, the conversion reached to 91.5% which demonstrated its significant stability.     

Properties and weldability of plasticized polylactic acid films

The objectives of the presented work were to investigate films based on polylactic acid (PLA) and polyethylene glycol (PEG) in order to improve ductility and weldability of PLA films. The effect of plasticizer amount on the thermal, rheological, and mechanical properties of PLA plasticized films was investigated. The PEG content does affect the glass transition and the cold crystallization temperature of PLA in blends, while the melting temperature was not affected by the addition of PEG. The complex viscosity of the neat PLA granules and of plasticized films showed strong temperature and angular velocity dependence. The Young's modulus and tensile strength of plasticized films were improved with increasing plasticizer concentration, while the elongation at break stays rather constant. Plasticized PLA films were furthermore heat welded. These investigations showed that plasticized PLA films can be welded by heat welding. The obtained weld strength is strongly depending on the PEG amount as well as on selected welding parameters. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40394.     

Screening of Food Samples for Zearalenone Toxin Using an Electrochemical Bioassay Based on DNA–Zearalenone Interaction

This study was conducted to design a biosensor as a new, rapid, and sensitive tool for investigation of binding of zearalenone with double-stranded DNA (dsDNA). Polydiallyldimethylammonium chloride (PDDA) as a polycation and multiwall carbon nanotubes (MWCNTs) provide a positively charged surface with a high surface area for the immobilization of dsDNA as a polyanion on the surface of pencil graphite electrode (PGE). Using the dsDNA/MWCNT–PDDA-modified PGE, it was possible to detect the interaction of zearalenone with dsDNA, which allowed us to apply the dsDNA-modified electrode for trace determination of zearalenone. The changes at the oxidation signal of adenine were evaluated before/after each modification/immobilization step. By using dsDNA/PDDA–MWCNT/PGE, zearalenone could be detected as low as 0.005 ng mL^?1. The relative standard deviation of five measurements of 0.5 ng mL^?1 zearalenone was found to be 4.2 %. Finally, the highly stable electrochemical biosensor was applied to analyze the zearalenone concentration in milk and wheat samples.

Open image in new window

Graphical Abstract xElectrochemical DNA Biosensor for Zearalenone detection