Modeling aviation baggage screening security systems: a case study

Aviation security protects vital national interests, as well as passengers and aircraft. Key components of an aviation security system include baggage and passenger screening devices and operations. Determining how and where to assign (deploy) such devices can be quite challenging. Moreover, even after such systems are in place, it can be difficult to measure their effectiveness. This paper describes how discrete optimization models can be used to address these questions, based on three performance measures that quantify the effectiveness of airport baggage screening security device systems. These models are used to solve for optimal airport baggage screening security device deployments considering the number of passengers on a set of flights who have not been cleared using a security risk assessment system in use by the Federal Aviation Administration (i.e., passengers whose baggage is subjected to screening), the number of flights in this set, and the size of the aircraft for such flights. Several examples are provided to illustrate these results, including an example that uses data available from the Official Airline Guide.     

Operating experience from the ehecatl wind turbines

This paper presents a summary of the mechanical features and the medium term operating experience from three small horizontal axis wind energy conversion systems covering a range of 500 to 5000 Watt, intented for rural and isolated communities. These turbines have a new regulator which reduces gyroscopic loads, is easy to adjust and could be manufactured stronger and in smaller sizes than the conventional tail vanes. It is concluded that is feasible to build cheaps and reliable wind turbine generators with an acceptable efficiency employing common-use elements, but is needed a careful and optimized design.     

All‐hexahedral element meshing: automatic elimination of self‐intersecting dual lines

There has been some degree of success in all‐hexahedral meshing. Standard methods start with the object geometry defined by means of an all‐quadrilateral mesh, followed by the use of the combinatorial dual to the mesh in order to define the internal connectivities among elements. For all of the known methods using the dual concept, it is necessary to first prevent or eliminate self‐intersecting (SI) dual lines of the given quadrilateral mesh. The relevant features of SI lines are studied, giving a method to remove them, which avoids deforming the original geometry. Some examples of resulting meshes are shown where the current meshing method has been successfully applied. Copyright © 2002 John Wiley & Sons, Ltd.     

In-laboratory removal of femoral sheath following protamine administration in patients having intracoronary stent implantation

Two hundred twenty-eight patients with successful coronary stent implantation were randomized either to protamine administration and femoral sheath removal (group I, n = 117) or no heparin neutralization and delayed sheath removal (group II, n = 111). The hospital stay after treatment was shorter in patients receiving protamine; therefore, protamine use for neutralizing circulating heparin may be safely administered immediately after stent implantation.     

An improved method for magnetic identification and localization of cracks in conductors

A SQUID magnetometer can be used to measure the magnetic field produced by flaws in a two-dimensional, conducting plate carrying a current. Identification of the flaw-induced magnetic field is difficult because of the large magnetic field associated with the edges of the plate and the current in the leads that connect the plate to the power supply. We have developed a technique by which the wire and edge fields can be cancelled prior to mapping the magnetic field. In this technique, a similar unflawed conducting sheet is placed adjacent to the flawed plate, with a connection between the sheet and the plate at one edge, and with the opposite edges of the sheet and of the plate connected to the two conductors of a coaxial cable. Thus, an applied current will flow along one conductor of the cable, across the cancelling sheet, cross into the flawed plate, return along the plate, and then return to the power supply along the other conductor of the coaxial cable. As a result of this geometry, there is no magnetic field from the lead-in wires because they are coaxial, and the magnetic field due to the edges of the plate is cancelled by the opposing magnetic field of the edges in the adjacent sheet. The extent of cancellation is determined primarily by the separation between the plate and the cancelling sheet, by the thickness of the plate, and by macroscopic inhomogeneities in their electrical conductivities.     

Attentional cues in chronic schizophrenia: Abnormal disengagement of attention.

M. I. Possner's 1980 reaction time (RT) paradigm was used to examine the engagement and disengagement operations of visual selective attention in patients with schizophrenia. In the 1st experiment 14 medicated, chronic schizophrenic Ss (diagnosed by criteria of the Diagnostic and Statistical Manual of Mental Disorders [DSM-I]), and 15 age-matched normal and control Ss made a speeded response to a target preceded by a valid, and invalid, or no cue. Control Ss showed the expected advantage and disadvantage in RT for valid and invalid cues, which suggests intact engagement and disengagement operations. For schizophrenic Ss, valid cues also enhanced RT, but invalid cues did not slow RT. Similar results were found in the 2nd experiment. The failure of unpredictable, invalid cues to inhibit RT in chronic schizophrenia may be related to an abnormality in the disengagement operation of selective attention. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Infants of diabetic mothers (IDM). II -- Fibronectin and perinatal morbidity

OBJECTIVE: The objective of this study was to determine fibronectin levels in umbilical cord blood of infants of diabetic mothers (IDM) and evaluate a possible correlation with perinatal pathology. PATIENTS AND METHODS: A prospective study of 58 IDM (33 males and 25 females) and 58 control newborns (NB) (33 males and 25 females) was carried out. RESULTS: There were no differences in fibronectin levels between the two groups nor between the sexes. Perinatal morbidity was higher in the IDM group, but there was no correlation between fibronectin levels and the presence of perinatal pathology. CONCLUSIONS: Fibronectin levels are not useful in the perinatal evaluation of infants of diabetic mothers.     

Cathepsin L2, a novel human cysteine proteinase produced by breast and colorectal carcinomas

We have identified and cloned a new member of the papain family of cysteine proteinases from a human brain cDNA library. The isolated cDNA codes for a polypeptide of 334 amino acids that exhibits all of the structural features characteristic of cysteine proteinases, including the active site cysteine residue essential for peptide hydrolysis. Pairwise comparisons of this amino acid sequence with the remaining human cysteine proteinases identified to date showed a high percentage of identity (78%) with cathepsin L; the percentage of identity with all other members of the family was much lower (<40%). On the basis of these structural characteristics, we have tentatively called this novel protein cathepsin L2. The cDNA encoding the mature cathepsin L2 was expressed in Escherichia coli, and after purification, the recombinant protein was able to degrade the synthetic peptide benzyloxycarbonyl-L-phenylalanyl-L-arginine-7-amido-4-methylcoumarin, which is commonly used as a substrate for cysteine proteinases. Cathepsin L2 proteolytic activity on this substrate was abolished by trans-epoxysuccinyl-L-leucylamido-(4-guanidino)butane, an inhibitor of cysteine proteinases, thus providing additional evidence that the isolated cDNA encodes a functional cysteine proteinase. Northern blot analysis of polyadenylated RNAs isolated from a variety of human tissues demonstrated that cathepsin L2 is predominantly expressed in the thymus and testis. This finding is in marked contrast with the wide tissue distribution of most cysteine proteinases characterized to date, including cathepsin L, and suggests that cathepsin L2 may play a specialized role in the thymus and testis. Expression analysis of cathepsin L2 in human tumors revealed a widespread expression in colorectal and breast carcinomas but not in normal colon or mammary gland or in peritumoral tissues. Cathepsin L2 was also expressed by colorectal and breast cancer cell lines as well as by some tumors of diverse origin, including ovarian and renal carcinomas. These results open the possibility that this novel enzyme may be involved in tumor processes, as already reported for other cysteine proteinases, including cathepsin L.     

Development of the meshless finite volume particle method with exact and efficient calculation of interparticle area

The Finite Volume Particle Method (FVPM) is a meshless method based on a definition of interparticle area which is closely analogous to cell face area in the classical finite volume method. In previous work, the interparticle area has been computed by numerical integration, which is a source of error and is extremely expensive. We show that if the particle weight or kernel function is defined as a discontinuous top-hat function, the particle interaction vectors may be evaluated exactly and efficiently. The new formulation reduces overall computational time by a factor between 6.4 and 8.2. In numerical experiments on a viscous flow with an analytical solution, the method converges under all conditions. Significantly, in contrast with standard FVPM and SPH, error depends on particle size but not on particle overlap (as long as the computational domain is completely covered by particles). The new method is shown to be superior to standard FVPM for shock tube flow and inviscid steady transonic flow. In benchmarking on a viscous multiphase flow application, FVPM with exact interparticle area is shown to be competitive with a mesh-based volume-of-fluid solver in terms of computational time required to resolve the structure of an interface.     

Pervaporation of 50 wt % ethanol–water mixtures with poly(1‐trimethylsilyl‐1‐propyne) membranes at high temperatures

Poly(1‐trimethylsilyl‐1‐propyne) (PTMSP) membranes have been used to separate ethanol–water mixtures by pervaporation. This polyacetylene is known to present high affinity toward ethanol, showing high selectivity and ethanol permeation flux. The performance of this polymer in the separation of alcohol–water solutions has been evaluated over long periods (572 h) at a high temperature (75°C) to examine the deterioration of the transport properties in the separation of 50 wt % ethanol–water solutions. Although PTMSP membranes present good characteristics for the separation of gases and liquid mixtures, their organic selectivity decrease with the operating time because of the relaxation processes of the polymeric chains, which affect the free volume of the polymer, the deterioration being more evident for concentrated solutions. The effects of the operation temperature on the characteristic parameters of pervaporation have also been studied to establish how this variable affects the performance of PTMSP membranes. The selectivity increases slightly with the operation temperature, but the effect of the temperature on the separation factor decreases as membranes are degraded with the operation time. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2843–2848, 2007