CFD Modeling of Active Volume Creation in a Non‐Newtonian Fluid Agitated by Submerged Recirculating Jets

Computational fluid dynamics (CFD) models were employed to investigate flow conditions inside a model reactor in which yield stress non‐Newtonian liquid is mobilized using submerged recirculating jets. The simulation results agree well with the experimental results of active volume in the reactor obtained using flow visualization by the authors in a previous study. The models developed are capable of predicting a critical jet velocity (v_c) that determines the extent of active volume obtained due to jet mixing. The v_c values are influenced both by the rheological properties of the liquid and the nozzle orientation. The liquid with higher effective viscosity leads to higher v_c for a downward facing injection nozzle. However, an upward facing injection nozzle along with a downward facing suction nozzle generates enhanced complementary flow fields which overcome the rheological constraints of the liquid and lead to lower v_c.     

The laminar/turbulent transition in a sludge pipeline

Globally, wastewater treatment plants are under pressure to handle high concentration sludge in a sludge treatment line. Unawareness of the non-Newtonian behaviour of the thickened sludge has the potential to cause unexpected problems when the fluid behaviour changes from turbulent to laminar flow. In this study, sludge apparent viscosity was plotted as a function of total suspended solids concentration (TSS) and shear rate. Then, the transition velocity based on several predictive models in the literature was determined. This analysis provides a practical basis for the prediction of the pipe flow behaviour of thickened sludge in troubleshooting and engineering design.     

Technological and flavour potential of cultures isolated from traditional Greek cheeses – A pool of novel species and starters

This study explored the microbiota of Formaella, Kopanisti, Feta and Mana cheeses. A total of 133 wild lactic acid bacteria were isolated and classified phenotypically. Mesophilic lactobacilli were the most abundant group. Thermophilic lactobacilli and thermophilic cocci were the best milk acidifiers, whereas thermophilic lactobacilli were the most proteolytic isolates. Higher peptidolytic and esterolytic activities were obtained with thermophilic cocci. Only five isolates were lipolytic, whereas none was able to catabolize citrate. Fast gas chromatography−mass spectrometry analysis of the metabolites produced and subsequent principal components analysis revealed segregated groups of isolates in accordance with the phenotypic ones. Electronic nose analysis revealed similar results. Lactobacillus rennini and Lactobacillus acidipiscis were found to be the sole microbial species in Kopanisti cheese and Mana. These isolates produced alcohols and aldehydes as major volatile compounds, as a result of secondary amino acid catabolism.     

Rockford, Ill.: Cognitive and Affective Outcomes

Small but significant and possibly critical differences favor two-way system of in-service training program for city firefighters.     

Glass microparticle- versus microsphere-filled experimental dental adhesives

This study aimed to formulate antibacterial dental adhesives. Phosphate-substituted methacrylate adhesives were modified with 0–20 wt % copper-doped glass microparticles. Two shapes of microparticles were used: regular shaped (microspheres) and irregular shaped (microparticles). The morphology/composition, roughness, monomer conversion (DC%), thermogravimetric analysis, and antibacterial action against S. mutans and P. aeruginosa and ion release were investigated. The results showed that microspheres produced adhesives with a relatively smoother surface than microparticles did. The DC% of adhesives increased with increasing glass filler content. Filled adhesives showed polymer decomposition at ~315 °C and glass melting at 600–1000 °C. The weight loss percent of adhesives decreased with increasing weight percent of fillers. Glass microparticles at 0–20 wt % significantly increased the antibacterial action of adhesives against both bacteria. Glass microspheres at 0–5 wt % significantly increased the antibacterial action of adhesives against both bacteria. Only 20 wt % microparticle-filled adhesive showed an inhibition zone similar to tobramycin (positive control). Microparticle-filled adhesives (with >5 wt % filler) significantly reduced S. mutans more than their microsphere counterparts. Microsphere-filled adhesives (with ≤5 wt % filler) significantly reduced P. aeruginosa more than their microparticle counterparts. Microsphere-filled adhesives showed higher Cu release than their microparticle counterparts. Accordingly, phosphate-substituted methacrylate filled with glass could be used as an antibacterial adhesive. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47832.     

Plant-natural enemy association in the tritrophic system,Cotesia rubecula-Pieris rapae-brassiceae (cruciferae): I. Sources of infochemicals

The role of airborne infochemicals in host selection by the parasitoidCotesia rubecula (Marshal) (Hymenoptera: Braconidae) was examined in a wind tunnel. To elucidate the role of volatile chemicals in attractingC. rubecula to cabbage infested by the host [Pieris rapae L. (Lepidoptera: Pieridae)], the potential sources of volatiles related toP. rapae infestation on cabbage were tested individually. The responses of females to nonhost plant species, bean and geranium, as well as to frass of a nonhost lepidopteran were also examined.C. rubecula was attracted to cabbage previously infested byP. rapae and to frass and regurgitate ofP. rapae. No attraction was observed to larvae ofP. rapae alone. Females were also attracted to mechanically damaged cabbage, cabbage previously infested byPlutella xylostella L. (Lepidoptera: Plutellidae) (a nonhost lepidopteran herbivore), and cabbage previously infested by snails (a nonhost, noninsect herbivore). Intact cabbage, bean, and geranium plants elicited no attraction. A low frequency of attraction was observed to mechanically damaged bean and geranium. Attraction was also observed to frass ofP. xylostella. Volatiles from cabbage related to damage, and volatiles from frass and regurgitate of the host seem to play an important role in guidingC. rubecula to plants infested by its host.     

Clear model fluids to emulate the rheological properties of thickened digested sludge

Optimising flow processes in wastewater treatment plants requires that designers and operators take into account the flow properties of the sludge. Moreover, due to increasingly more stringent conditions on final disposal avenues such as landfill, composting, incineration etc., practitioners need to produce safer sludge in smaller quantities. Anaerobic digestion is a key treatment process for solids treatment and pathogen reduction. Due to the inherent opacity of sludge, it is impossible to visualise the mixing and flow patterns inside an anaerobic digester. Therefore, choosing an appropriate transparent model fluid which can mimic the rheological behaviour of sludge is imperative for visualisation of the hydrodynamic functioning of an anaerobic digester.Digested sludge is a complex material with time dependent non-Newtonian thixotropic characteristics. In steady state, it can be modelled by a basic power-law. However, for short-time processes the Herschel-Bulkley model can be used to model liquid-like properties.The objective of this study was to identify transparent model fluids which will mimic the behaviour of real sludge. A comparison of three model fluids, Carboxymethyl Cellulose (CMC), Carbopol gel and Laponite clay revealed that these fluids could each model certain aspects of sludge behaviour. It is concluded that the rheological behaviour of sludge can be modelled using CMC in steady state flow at high shear rates, Carbopol gel for short-time flow processes and Laponite clay suspension where time dependence is dominant.