Electrowetting-Assisted Generation of Ultrastable High Charge Densities in Composite Silicon Oxide–Fluoropolymer Electret Samples for Electric Nanogenerators

Electric nanogenerators that directly convert the energy of moving drops into electrical signals require hydrophobic substrates with a high density of static electric charge that is stable in “harsh environments” created by continued exposure to potentially saline water. The recently proposed charge-trapping electric generators (CTEGs) that rely on stacked inorganic oxide–fluoropolymer (FP) composite electrets charged by homogeneous electrowetting-assisted charge injection (h-EWCI) seem to solve both problems, yet the reasons for this success have remained elusive. Here, systematic measurements at variable oxide and FP thickness, charging voltage, and charging time and thermal annealing up to 230 °C are reported, leading to a consistent model of the charging process. It is found to be controlled by an energy barrier at the water-FP interface, followed by trapping at the FP-oxide interface. Protection by the FP layer prevents charge densities up to −1.7 mC m⁻² from degrading and the dielectric strength of SiO₂ enables charge decay times up to 48 h at 230 °C, suggesting lifetimes against thermally activated discharging of thousands of years at room temperature. Combining high dielectric strength oxides and weaker FP top coatings with electrically controlled charging provides a new paradigm for developing ultrastable electrets for applications in energy harvesting and beyond.     

Fast and accurate 4‐node quadrilateral

An accurate and variationally consistent 4‐node quadrilateral element is introduced where high coarse mesh accuracy and low mesh distortion sensitivity are characteristic qualities, even when incompressibility is approached for plane strain. One‐point quadrature integration procedure is adopted and a new improved stabilization technique is developed. Orthogonality conditions are utilized so that the patch test is satisfied for arbitrary quadrilaterals. Several numerical examples including a convergence rate study are presented which confirm the excellent performance of this element. Copyright © 2004 John Wiley & Sons, Ltd.     

Slip Control System for a Deep-Sea Mining Machine

Tracked vehicles capable of locomotion in the deep sea are used for manganese nodule mining. This requires specific technical solutions in various respects. Locomotion in the soft sea bed is one of them. For the Crawler to safely maneuver, an automatic drive mode with slip control of the driving tracks is essential. Based on experimental studies at IKS, University of Siegen, slip control for the NIOT-IKS mining machine has been developed and implemented. The experimental setup for the development of the slip control along with the logic of the automatic driving mode is described. The system is critically discussed and the test results and future work are briefly outlined. Note to Practitioners-The work is carried out as part of the polymetallic nodule mining program of the Government of India. The technique of slip control is a specific requirement for a tracked vehicle used in the deep sea. Slip is common in many vehicles-tracked and otherwise. Examples are steam engines in the early days and ordinary cars while negotiating slush or snow/ice and dozers working in soft soil. While these are manually controlled by drivers who have firsthand knowledge of the environmental conditions, in the case of a mining machine in deep sea, it has to be completely automatic and, hence, is challenging. The knowledge generated in this work could be effectively used by practitioners in other related areas of automobile engineering for updating their expertise. Also, similar techniques may be used for maneuvering vehicles sent to other planets     

Guidelines for management of left-sided prosthetic valve thrombosis: a role for thrombolytic therapy. Consensus Conference on Prosthetic Valve Thrombosis

OBJECTIVES: We sought to form a consensus recommendation for management of prosthetic valve thrombosis (PVT) from previous case and uncontrolled reports from a consensus of international specialists. BACKGROUND: PVT and thromboembolism relate to inadequate anticoagulation and valve type and location. PVT is suspected by history (dyspnea) and auscultation (muffled valve sounds or new murmurs) and confirmed by Doppler echocardiography showing a marked valve gradient. METHODS: A consensus conference was held to recommend management of left-sided PVT. RESULTS: Transesophageal Doppler echocardiography is used to visualize abnormal leaflet motion and the size, location and mobility of thrombus. Thrombolysis is used for high risk surgical candidates with left-sided PVT (New York Heart Association functional class III or IV) because cerebral thromboembolism may occur in 12% of patients. Duration of thrombolysis depends on resolution of pressure gradients and valve areas to near normal by Doppler echocardiography performed every few hours. Lysis is stopped after 72 or 24 h if there is no hemodynamic improvement (operation indicated). Heparin infusion with frequent measurement of activated partial thromboplastin time (aPTT) begins when aPTT is more than twice control levels and can be converted to warfarin (international normalized ratio [INR] 2.5 to 3.5) plus aspirin (81 to 100 mg/day). Patients in functional class I or II have lower surgical mortality, and those with large immobile thrombi on the prosthetic valve or left atrium have responded to endogenous lysis with combined subcutaneous heparin every 12 h (aPTT 55 to 80 s) plus warfarin (INR 2.5 to 3.5) for 1 to 6 months. Operation is advised for nonresponders or patients with mobile thrombi. CONCLUSIONS: Thrombolysis, followed by heparin, warfarin and aspirin, is advised for high risk surgical candidates with left-sided PVT.     

Parallel reduced area multipliers

As developed by Wallace and Dadda, a method for high-speed, parallel multiplication is to generate a matrix of partial products and then reduce the partial products to two numbers whose sum is equal to the final product. The resulting two numbers are then summed using a fast carry-propagate adder. This paper presents Reduced Area multipliers, which employ a modified reduction scheme that results in fewer components and less interconnect overhead than either Wallace or Dadda multipliers. This reduction scheme is especially useful for pipelined multipliers, because it minimizes the number of latches required in the reduction of the partial products. The reduction scheme can be applied to either unsigned (sign-magnitude) or two's complement numbers. Equations are given for determining the number of components and a method is presented for estimating the interconnect overhead for Wallace, Dadda, and Reduced Area multipliers. Area estimates indicate that for non-pipelined multipliers, the reduction in area achieved with Reduced Area multipliers ranges from 3.7 to 6.6 percent relative to Dadda multipliers, and from 3.8 to 8.4 percent relative to Wallace multipliers. For fully pipelined multipliers, the reduction in area ranges from 15.1 to 33.6 percent relative to Dadda multipliers, and from 2.9 to 9.0 percent relative to Wallace multipliers.     

Simulating Ramsey-Type Fringes in a Pulsed Microwave-Driven Classical Josephson Junction

We present evidence for a close analogy between the nonlinear behaviour of a pulsed microwave-driven Josephson junction at low temperature and the experimentally observed behaviour of Josephson systems operated below the quantum transition temperature under similar conditions. We specifically address observations of Ramsey-type fringe oscillations, which can be understood in classical nonlinear dynamics as results of slow transient oscillations in a pulsed microwave environment. Simulations are conducted to mimic experimental measurements by recording the statistics of microwave-induced escape events from the anharmonic potential well of a zero-voltage state. Observations consistent with experimentally obtained Ramsey-type oscillations are found in the classical model. An erratum to this article can be found at