五轴铣削加工中心坐标转换数学模型的建立及应用

首先以 HERMLE C1200 U 为例分析了五轴铣削加工中心的基本结构,然后据此给出了涉及多轴铣削加工中心后置处理角度分配和坐标变换的数学模型,最后介绍了以此数学模型为核心,为UG 软件开发的后置处理软件 UG-HERP1.0的解决方案。     

Interaction of Yttria with Uranium Fluoride Gases (UFn, n= 4, 6) at High Temperatures

The corrosion mechanism and microstructural characteristics of yttria (Y₂O₃) exposed to uranium hexafluoride (UF₄) and uranium tetrafluoride gases at temperatures above 900°C were investigated. Processed yttria samples were exposed for times ranging from 5 to 40 min. A weight increase was observed after each test exposure. An outer corrosion scale composed of UO₂ and YF₃, and an inner corrosion layer of YF₃, were observed following the UF₆ reaction at nearly 1200 K. During the UF₄ exposure, an outer layer containing a liquid mixture of fluoride, oxygen, yttrium, uranium compounds, a secondary reaction layer of UO₂ followed by an inner layer composed of a solution of Y₂O₃ and YF₃, possibly in the form of YOF inner layer, were observed. It was found that the corrosion process is controlled by the diffusion which is evidenced by the parabolic growth rate of the secondary layer. After completion of the solidification process, the formation of a eutectic region and dendrites were observed throughout the outer scale. In general, at temperatures above 1173 K, high corrosion rates were observed, and yttria did not appear to be a viable containment material for UF₄ and UF₆.     

Development of a suitable model for characterizing photovoltaic arrays with shaded solar cells

The aim of this study is to investigate the effects of non-uniform solar irradiation distribution on energy output of different interconnected configurations in photovoltaic (PV) arrays. In order to find which configuration is less susceptible to mismatch effects, a PV module model is developed. This model can take into consideration the effects of bypass diodes and the variation of the equivalent circuit parameters with respect to operating conditions. The proposed model can provide sufficient degree of precision as well as solar cell-based analysis in analyzing large scale PV arrays without increasing the computational effort. In order to produce more reliable and robust simulations, improved and extended algorithms are presented. Some results are discussed in detail and some recommendations are extracted by testing several shading scenarios.     

Degradation of PCB in different soils by inoculated Alcaligenes xylosoxidans

The degradation of PCB in soils by the biphenyl-utilising strain Alcaligenes xylosoxidans was studied in different soil types. In addition to the congener specificity, significant differences in the degradation of PCB by the strain in the different soil types were observed. Efficiency of degradation was generally better in sterilised soils, but the differences were not as significant as the differences observed between different soil types. These results indicate that the degradation of PCB is probably related not only to the capabilities of the strain employed and quality and amount of competitive species inhabiting the soils, but also to the soil sorption of the PCB congeners. Degradation is faster in the soils containing an intermediate amount of organic carbon with a high portion of total and aromatic carbon in humic acids.     

Interval type-2 fuzzy inverse controller design in nonlinear IMC structure

In the recent years it has been demonstrated that type-2 fuzzy logic systems are more effective in modeling and control of complex nonlinear systems compared to type-1 fuzzy logic systems. An inverse controller based on type-2 fuzzy model can be proposed since inverse model controllers provide an efficient way to control nonlinear processes. Even though various fuzzy inversion methods have been devised for type-1 fuzzy logic systems up to now, there does not exist any method for type-2 fuzzy logic systems. In this study, a systematic method has been proposed to form the inverse of the interval type-2 Takagi-Sugeno fuzzy model based on a pure analytical method. The calculation of inverse model is done based on simple manipulations of the antecedent and consequence parts of the fuzzy model. Moreover, the type-2 fuzzy model and its inverse as the primary controller are embedded into a nonlinear internal model control structure to provide an effective and robust control performance. Finally, the proposed control scheme has been implemented on an experimental pH neutralization process where the beneficial sides are shown clearly.     

Investigation of Ant System parameter interactions by using design of experiments for job-shop scheduling problems

In recent years, one of the most important and promising research fields has been metaheuristics to find optimal or near-optimal solutions for NP-hard combinatorial optimization problems. Improving the quality of the solution or the solution time is basic research area on metaheuristics. Modifications of the existing ones or creation of hybrid approaches are the focus of these efforts. Another area of improving the solution quality of metaheuristics is finding the optimal combination of algorithm control parameters. This is usually done by design of experiments or one-at-a-time approach in genetic algorithms, simulated annealing and similar metaheuristics. We observe that, in studies which use Ant Colonies Optimization (ACO) as an optimization technique; the levels of control parameters are determined by some non-systematic initial experiments and the interactions of the parameters are not studied yet.In this study, the parameters of Ant System have been investigated on different sized and randomly generated job-shop scheduling problems by using design of experiments. The effects and interactions of the parameters have been interpreted with the outputs of the experiments. Referring to the statistical analysis it is observed that none of the interactions between the Ant System parameters has a significant effect on makespan value. A specific fractional experimental design is suggested instead of the full factorial design. Depending on the findings from the benchmark problems it will be a reliable approach to use the suggested design for saving time and effort in experiments without sacrificing the solution quality.     

Evaluation of a university website’s usability for visually impaired students

Today websites are the tools most commonly used to access information. People with disabilities face difficulties accessing or using information, and the importance of website usability in their lives needs to be recognized. Visually impaired students need to be able to use university websites that inform them about the opportunities and events taking place on campus. This study aims to evaluate the usability of a university website by visually impaired students. In this research, six visually impaired students were interviewed. The assistive technologies they use, as well as the various web pages they wished to use unaided were identified. Following data collection, usability tests were conducted and satisfaction surveys were completed. The usability test was done with five visually impaired students. They were asked to think aloud while performing 11 tasks involving their university’s web pages, including the main page and the pages of student affairs, library and departments and then to accomplish these tasks. In this test, five tasks were not successfully completed by all students. According to the test results, finding final exam dates on the academic calendar posed major difficulties, and accessing the course schedule web page was the task that required the most time. The test results indicated the need for a search engine on each page, a text version for all pages, rearrangement of the web link sequences with tabs and more information about visuals. Suggestions related to the visually impaired students’ needs were offered.     

Using RFID for the management of pharmaceutical inventory — system optimization and shrinkage control

Motivated by a case study at a radiology practice, we analyze the incremental benefits of RFID technology over barcodes for managing pharmaceutical inventories. Unlike barcode technology, RFID enables accurate real-time visibility, which in turn enables several process improvements. We analyze the impact of automatic counting and discuss the system redesign critical to optimizing the inventory policy and eliminating shrinkage. We show that continuous review is superior to periodic review whenever accurate real-time information is available at no additional cost. We explain how RFID-enabled strategies vary with inventory parameters and provide a cost-benefit analysis for the implementation of RFID for the radiology practice.     

Partial correlation with copula modeling

We propose a new partial correlation approach using Gaussian copula. Our empirical study found that the Gaussian copula partial correlation has the same value as that which is obtained by performing a Pearson’s partial correlation. With the proposed method, based on canonical vine and d-vine, we captured direct interactions among eight histone genes.     

一株丝状真菌发酵法产红色素培养基的研究

研究了一株丝状真菌Miug-2．7发酵法生产红色素的液体培养基最佳组分，以及液体发酵培养基最佳配方．结果表明，本试验范围内最佳质量配比是淀粉3％，蛋白胨1．0％，诱导物1％，起始pH7．5．