The use of biomass and stillage recycle in conventional ethanol fermentation

Modifications of the conventional ethanol fermentation process using biomass and stillage recycle were investigated and the advantages of the technique were studied. The biomass recycle method resulted in a reduction in the use of approximately 8% raw material (molasses). The recycle of 15–70% of stillage (dealcoholised) from a previous fermentation was also tested successfully. Generally the results of these experiments revealed 13–47% less water consumption and consequently about 13–47% reduction of stillage volume, which was more economical for further treatments.     

Application of dielectric barrier discharge (DBD) plasma packed with glass and ceramic pellets for SO2 removal at ambient temperature: optimization and modeling using response surface methodology

Air pollution is a major health problem in developing countries and has adverse effects on human health and the environment. Non-thermal plasma is an effective air pollution treatment technology. In this research, the performance of a dielectric barrier discharge (DBD) plasma reactor packed with glass and ceramic pellets was evaluated in the removal of SO₂ as a major air pollutant from air in ambient temperature. The response surface methodology was used to evaluate the effect of three key parameters (concentration of gas, gas flow rate, and voltage) as well as their simultaneous effects and interactions on the SO₂ removal process. Reduced cubic models were derived to predict the SO₂ removal efficiency (RE) and energy yield (EY). Analysis of variance results showed that the packed-bed reactors (PBRs) studied were more energy efficient and had a high SO₂ RE which was at least four times more than that of the non-packed reactor. Moreover, the results showed that the performance of ceramic pellets was better than that of glass pellets in PBRs. This may be due to the porous surface of ceramic pellets which allows the formation of microdischarges in the fine cavities of a porous surface when placed in a plasma discharge zone. The maximum SO₂ RE and EY were obtained at 94% and 0.81 g kWh⁻¹, respectively under the optimal conditions of a concentration of gas of 750 ppm, a gas flow rate of 2 l min⁻¹, and a voltage of 18 kV, which were achieved by the DBD plasma packed with ceramic pellets. Finally, the results of the model's predictions and the experiments showed good agreement.     

Conductive multichannel PCL/gelatin conduit with tunable mechanical and structural properties for peripheral nerve regeneration

Peripheral nerve injuries remain among the most challenging medical issues despite numerous efforts to devise methods in fabrication of nerve conduits to functionally regenerate axonal defects. In this regard, the current study offers a holistic perspective in design by considering the mechanical, topographical and structural aspects which are crucial for a successful nerve guide conduit. Poly(e-caprolactone) and gelatin were employed to serve this purpose in the form of dual-electrospun films which were rolled and later shaped the assembly of a multichannel conduit. Polyaniline/graphene (PAG) nanocomposite was incorporated to endow the conduit with conductive properties. FTIR analysis, water contact angle measurements, and SEM observations as well as mechanical and conductivity tests were used to evaluate the properties of the conduits. In addition, MTT assay was conducted to assess the proliferation of rat bone marrow-derived mesenchymal stem cells cultured on the films. Incorporating 2% PAG proved to have superior cell support and proliferation, while guaranteeing electrical conductivity of 10.8 × 10⁻⁵ S/cm and remarkable tensile strength of 3.52 ± 1.3 MPa and 14.12 ± 3.1 MPa for wet and dry conditions, respectively. Overall, the observed results highlight the great potential of the fabricated conduit to be used as a candidate for peripheral nerve defects.     

Hydrodynamic characteristics of gas–solid fluidization at high temperature

Effect of temperature on the hydrodynamics of bubbling gas–solid fluidized beds was investigated in this work. Experiments were carried out at different temperatures ranged of 25–600°C and different superficial gas velocities in the range of 0.17–0.78 m/s with sand particles. The time‐position trajectory of particles was obtained by the radioactive particle tracking technique at elevated temperature. These data were used for determination of some hydrodynamic parameters (mean velocity of upward and downward‐moving particles, jump frequency, cycle frequency, and axial/radial diffusivities) which are representative to solids mixing through the bed. It was shown that solids mixing and diffusivity of particles increases by increasing temperature up to around 300°C. However, these parameters decrease by further increasing the temperature to higher than 300°C. This could be attributed to the properties of bubble and emulsion phases. Results of this study indicated that the bubbles grow up to a maximum diameter by increasing the temperature up to 300°C, after which the bubbles become smaller. The results showed that due to the wall effect, there is no significant change in the mean velocity of downward‐moving clusters. In order to explain these trends, surface tension of emulsion between the rising bubble and the emulsion phase was introduced and evaluated in the bubbling fluidized bed. The results showed that surface tension between bubble and emulsion is increased by increasing temperature up to 300°C, however, after that it acts in oppositely.     

A novel analog switch for high‐precision switched‐capacitor applications

The performance of a switched‐capacitor circuit strongly depends on its analog switches. This paper introduces a new technique to design a high‐precision analog metal‐oxide‐semiconductor switch for switched‐capacitor applications. The accuracy of analog switches is a critical parameter to determine overall performance of the discrete‐time analog systems. To satisfy the accuracy requirements of the switch, a novel technique to minimize the charge injection and clock feedthrough errors by using a very simple structure is proposed. Moreover, an innovative approach to increase the OFF resistance of the switch and consequently minimizing its leakage current is presented. To evaluate the performance of the proposed switch, simulations are done in TSMC 0.18μm standard complementary metal‐oxide‐semiconductor technology with BSIM3V3 device models. The ON and OFF resistances of the switch are one of the most important factors that should be considered while investigating analog switches. The ON resistance of the proposed switch is less than 560Ω over entire input signal range which completely satisfies the tracking bandwidth requirements. In addition, since the proposed switch provides an ultrahigh OFF resistance in the range of several GΩs, the leakage current of the proposed switch is negligible. Simulation results also show that switch‐induced errors are significantly eliminated by using the proposed cancellation technique. The output error charge due to charge injection and clock feedthrough over a wide range of input signal variation is very low (less than 1.6 fC). Moreover, simulation results show that the proposed switch achieves signal to noise plus distortion ratio of 80.55 dB, effective number of bits of 13.08, total harmonic distortion of ?81.41 dB, and spurious‐free dynamic range of 87.7 dB for a 2.5‐MHz sinusoidal input of 800‐mV peak‐to‐peak amplitude at 200‐MHz sampling rate with a 1.8‐V supply voltage. Consequently, the simulation results verify that the proposed switch can significantly improve the dynamic and static performances of a switched‐capacitor circuit.     

Preparation and characterization of novel derivatives of chitosan and trimethyl chitosan conjugated with dipeptides and vitamin B12 as candidates for oral delivery of insulin

Chitosan and its derivatives are widely used in drug delivery systems due to their bio-degradebility, bio-compatibility and absorption enhancing properties. Many peptide and protein derived therapeutics cannot be administered through oral rout because of the proteolytic condition of gastro-intestinal tract and their low bio-availability. Insulin is a peptide drug which is widely used in diabetics as repeated daily injection. Due to the fact that there are receptors for didpeptides and vitamine B12 in small intestine, in this research work novel derivatives of chitosan and trimethyl chitosan conjugated with glycyl-glycine, alanyl-alaninie and vitamine B12 were synthesized and characterized. The structure of conjugates as well as substitution of different functional groups was confirmed by different instrumental analytical methods such as Fourier transform infrared, magnetic resonance, and X-ray diffraction spectroscopy. Nano-particles of aforementioned loaded with insulin were prepared and their size, surface electrical charge and morphology characterized and their release profile were studied. The results are promising and reveal that these new chitosan and trimethyl chitosan derivatives are potential vehicles for protein and peptide drug molecules.     

Perfect forward secrecy in VoIP networks through design a lightweight and secure authenticated communication scheme

With the growth of the internet, development of IP based services has increased. Voice over IP (VoIP) technology is one of the services which works based on the internet and packet switching networks and uses this structure to transfer the multimedia data e.g. voices and images. Recently, Chaudhry et al., Zhang et al. and Nikooghadam et al. have presented three authentication and key agreement protocols, separately. However, in this paper, it is proved that the presented protocols by Chaudhry et al. and also Nikooghadam et al. do not provide the perfect forward secrecy, and the presented protocol by Zhang et al. not only is vulnerable to replay attack, and known session-specific temporary information attack, but also does not provide user anonymity, re-registration and revocation, and violation of fast error detection. Therefore, a secure and efficient two-factor authentication and key agreement protocol is presented. The security analysis proves that our proposed protocol is secure against various attacks. Furthermore, security of proposed scheme is formally analyzed using BAN logic and simulated by means of the AVISPA tool. The simulation results demonstrate security of presented protocol against active and passive attacks. The communication and computation cost of the proposed scheme is compared with previously proposed authentication schemes and results confirm superiority of the proposed scheme.

     

IoT-Enabled Autonomous System Collaboration for Disaster-Area Management

Timely investigating post-disaster situations to locate survivors and secure hazardous sources is critical, but also very challenging and risky. Despite first responders putting their lives at risk in saving others, human-physical limits cause delays in response time, resulting in fatality and property damage. In this paper, we proposed and implemented a framework intended for creating collaboration between heterogeneous unmanned vehicles and first responders to make search and rescue operations safer and faster. The framework consists of unmanned aerial vehicles (UAVs), unmanned ground vehicles (UGVs), a cloud-based remote control station (RCS). A light-weight message queuing telemetry transport (MQTT) based communication is adopted for facilitating collaboration between autonomous systems. To effectively work under unfavorable disaster conditions, antenna tracker is developed as a tool to extend network coverage to distant areas, and mobile charging points for the UAVs are also implemented. The proposed framework’s performance is evaluated in terms of end-to-end delay and analyzed using architectural analysis and design language (AADL). Experimental measurements and simulation results show that the adopted communication protocol performs more efficiently than other conventional communication protocols, and the implemented UAV control mechanisms are functioning properly. Several scenarios are implemented to validate the overall effectiveness of the proposed framework and demonstrate possible use cases.      

An efficient improvement remote user mutual authentication and session key agreement scheme for E-health care systems

The E-health care systems allow patients to gain the health monitoring facility and access medical services remotely. A secure mechanism for mutual authentication and session key agreement is the most important requirements for E-Health Care Systems. Recently, Amin et al.’s proposed a mutual authentication and session key agreement protocol and claimed that their scheme is secure against all possible attacks. In this paper, we show that not only their scheme is vulnerable to privileged-insider attack, replay attack, session key disclosure attack, but also does not provide patient untraceability and backward secrecy. In order to withstand the mentioned security weaknesses, we propose an efficient remote mutual authentication scheme for the systems which are using ECC and Fuzzy Extractor. The proposed scheme not only resists against different security attacks, but it also provides an efficient registration, login, mutual authentication, session key agreement, and password and biometric update phases. During the experimentation, it has been observed that the proposed scheme is secure against various known attacks. Beside, our scheme is robust against privileged-insider attack that it rarely checked in security analysis. The informal analysis will ensure that our scheme provides well security protection against the different security attacks. Furthermore, we analyzed the security of the scheme using AVISPA software and Random Oracle Model. The formal analysis results and performance evaluation vouch that our scheme is also secure and efficient in computation and communication cost.     

Multi-objective optimal design of braced frames using hybrid genetic and ant colony optimization

In this article, multi-objective optimization of braced frames is investigated using a novel hybrid algorithm. Initially, the applied evolutionary algorithms, ant colony optimization (ACO) and genetic algorithm (GA) are reviewed, followed by developing the hybrid method. A dynamic hybridization of GA and ACO is proposed as a novel hybrid method which does not appear in the literature for optimal design of steel braced frames. Not only the cross section of the beams, columns and braces are considered to be the design variables, but also the topologies of the braces are taken into account as additional design variables. The hybrid algorithm explores the whole design space for optimum solutions. Weight and maximum displacement of the structure are employed as the objective functions for multi-objective optimal design. Subsequently, using the weighted sum method (WSM), the two objective problem are converted to a single objective optimization problem and the proposed hybrid genetic ant colony algorithm (HGAC) is developed for optimal design. Assuming different combination for weight coefficients, a trade-off between the two objectives are obtained in the numerical example section. To make the final decision easier for designers, related constraint is applied to obtain practical topologies. The achieved results show the capability of HGAC to find optimal topologies and sections for the elements.