Circular stereotactic callosotomy: a preliminary report. Technical note

The authors propose a new method for performing stereotactic callosotomy, which they have named circular callosotomy. The operating device is the original Riechert-Mundinger's string electrode, which can be protruded through a side window and by rotating the probe it is possible to cut the commisural pathways to the extent required. The anatomical results of the operation can be checked using MRI scanning.     

The CORSET time-of-flight spectrometer for measuring binary products of nuclear reactions

The CORSET time-of-flight spectrometer has been developed at the Flerov Laboratory of Nuclear Reactions of the Joint Institute for Nuclear Research (Dubna, Russia) for investigating binary products of nuclear reactions. The spectrometer has been used to study the dynamics of fusion-fission and quasi-fission of superheavy elements. The design and the main characteristics of the spectrometer, as well as the algorithms for deducing the mass-energy distributions of fragments and the cross sections of nuclear reactions, are presented. The spectrometer contains two time-of-flight arms based on microchannel-plate detectors and three telescopes, each of which is composed of two microchannel-plate detectors and one semiconductor detector. A system of four semiconductor detectors is used to obtain the absolute value of a cross section. The time resolution of the time-of-flight arms is 150 ps, which allows the time-of-flight distances to be set at 10–20 cm, thus providing a mass resolution of 3 amu and an angular resolution of 0.3°. Owing to these characteristics, the spectrometer can be used as a trigger in multidetector setups for measuring light charged particles, neutrons, and γ rays in coincidence with reaction fragments.     

Treatment with the oral growth hormone secretagogue MK-677 increases markers of bone formation and bone resorption in obese young males

The effect of 2 months of treatment with the oral growth hormone (GH) secretagogue MK-677 on markers of bone metabolism was determined in healthy obese male subjects. This was a randomized, double-blind, parallel, placebo-controlled study. Twenty-four healthy obese males, 19-49 years of age, with body mass index > 30 kg/m2 were treated with MK-677 (25 mg/day; n = 12) or placebo (n = 12) for 8 weeks. MK-677 increased markers of bone formation; a 23% increase in the carboxy-terminal propeptide of type I procollagen levels and a 28% increase in procollagen III peptide levels were seen with as little as 2 weeks of MK-677 treatment (p < 0.01 and p = 0.001 vs. placebo, respectively) while a 15% increase in serum levels of osteocalcin was not detected until 8 weeks of treatment (p < 0.01 vs. placebo). Markers of bone resorption were induced within 2 weeks of treatment with MK-677; serum levels of the carboxy-terminal cross-linked telopeptide of type I collagen were increased 26% at 8 weeks (p = 0.001 vs. placebo), and urine hydroxyproline/creatinine and calcium/creatinine ratios at 8 weeks were increased by 23% (p < 0.05 vs. placebo) and 46% (p < 0.05 vs placebo), respectively, MK-677 increased serum insulin-like growth factor binding protein-5 (IGFBP-5) by 43-44% after 2-8 weeks of treatment (p < 0.01 vs. placebo). Serum IGFBP-4 was increased by 25% after 2 weeks of treatment (p < 0.001 vs. placebo) but no significant change from baseline was observed after 8 weeks of treatment. Plasma interleukin-6 was not significantly changed by active treatment. In conclusion, short-term treatment of healthy obese male volunteers with the GH secretagogue MK-677 increases markers of both bone resorption and formation. Large increases in serum levels of IGF-1 and IGFBP-5 and a transient increase in serum IGFBP-4 were found. Future long-term studies are needed to investigate if prolonged treatment with MK-677 increases bone mass.     

Modification of the polarity of isotactic polypropylene through blending with oxidized paraffin wax

The modification of the polarity of isotactic polypropylene (iPP) through blending with oxidized paraffin wax (Fischer–Tropsch synthesis) was investigated. The oxidized paraffin wax significantly increased the polar component of the total surface free energy of polypropylene. Modified iPP also showed significantly higher adhesion to the polar substrate, as represented by a crosslinked epoxy‐based resin. The conservation of the good mechanical properties of the blends was observed up to 6 wt % wax. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 529–533, 2004     

Structural,electrical and electrochemical properties of polyacrylonitrile-ammonium hexaflurophosphate polymer electrolyte system

Polyacrylonitrile (PAN) based polymer electrolyte membranes complexed with Ammonium hexafluorophosphate (NH₄PF₆) with different molar concentration are prepared by solution casting method. Increase in the amorphous nature by the addition of Ammonium salt and the formation of polymer-salt complex are confirmed by X ray diffraction studies and infrared spectroscopy respectively. The glass transition temperature is measured for all membranes and it showed a lowest value for the PAN complexed with 20 mol% of NH₄PF₆. Electrical properties are studied by AC impedance spectroscopy. An ionic conductivity of the order of 10^?3 Scm^?1 is obtained for the 80 PAN / 20 NH₄PF₆ polymer electrolyte. Conductivity, dielectric and modulus spectra from the impedance data are analysed to understand the ionic transport mechanism. Transference number measurement is done to study the ionic contribution to the charge transport. A proton battery with the configuration, Zn+ ZnSO₄. 7H₂O /80 PAN / 20 NH₄PF₆ / PbO₂ +V₂O₅ has been constructed and its discharge characteristics are studied.     

Effect of TiO2 and nozzle geometry on diesel emissions fuelled with biodiesel blends

In this present study, the compression ignition engine was designed to run on CIME (Calophyllum inophyllum methyl ester) biodiesel with nanoparticles. The TiO₂ nanoparticle is added to the biodiesel in the form of nanofluid at concentration levels of 100?ppm whereas ethanox is added at levels of 100, 200 and 500?ppm. The nanoparticle and the ethanox are dispersed by the ultrasonication process. The addition of nanofluid reduces the particulate emission like nitrogen oxide (NO_x) at 100% load. The efficiency is better and emission is reduced owing to the influence of explosion of water molecules present in the biodiesel. We found ethanox to be a superlative nanofluid to reduce the emission of toxic gas at appreciable levels. We have witnessed a 20% reduction in emission of NO_x and 10% reduction of other particulate emission. In addition, the exit geometry of exhaust is modified from a circular shape to an elliptical one and the consequence of the geometry is calculated.     

Nanostructured Zn-Fe2O3 thin film modified by Fe-TiO2 for photoelectrochemical generation of hydrogen

Nanostructured semiconductor thin films of Zn-Fe₂O₃ modified with underlying layer of Fe-TiO₂ have been synthesized and studied as photoelectrode in photoelectrochemical (PEC) cell for generation of hydrogen through water splitting. The Zn-Fe₂O₃ thin film photoelectrodes were designed for best performance by tailoring thickness of the Fe-TiO₂ film. A maximum photocurrent density of 748 μA/cm² at 0.95 V/SCE and solar to hydrogen conversion efficiency of 0.47% was observed for 0.89 μm thick modified photoelectrode in 1 M NaOH as electrolyte and under 1.5 AM solar simulator. To analyse the PEC results the films were characterized for various physical and semiconducting properties using XRD, SEM, EDX and UV–Visible spectrophotometer. Zn-Fe₂O₃ thin films modified with Fe-TiO₂ exhibited improved visible light absorption. A noticeable change in surface morphology of the modified Zn-Fe₂O₃ film was observed as compared to the pristine Zn-Fe₂O₃ film. Flatband potential values calculated from Mott–Schottky curves also supported the PEC response.     

Stability of oil‐in‐water emulsions as influenced by thermal treatment of whey protein dispersions or emulsions

Properties of whey protein concentrate stabilised emulsions were modified by protein and emulsion heat treatment (60–90 °C). All liquid emulsions were flocculated and the particle sizes showed bimodal size distributions. The state and surface properties of proteins and coexisting protein/aggregates in the system strongly determined the stability of heat‐modified whey protein concentrate stabilised emulsions. The whey protein particles of 122–342 nm that formed on protein heating enhanced the stability of highly concentrated emulsions. These particles stabilised protein‐heated emulsions in the way that is typical for Pickering emulsions. The emulsions heated at 80 and 90 °C gelled due to the aggregation of the protein‐coated oil droplets.     

Microstructural evolution during batch annealing of boron containing aluminum-killed steel

Role of boron in low carbon aluminum-killed cold rolled batch annealed steels has been critically examined. It was found that it is not the absolute boron but B/N ratio that controls the forming properties. Pancake shaped grains (high grain shape anisotropy) are highly desirable for improving the desirable {111} texture, normal anisotropy, and draw ability of the steel sheets. Microstructural analysis showed that the extent of pancaking decreases with increase in B/N atomic ratio and reaches ultimately to formation of equiaxed grains. Low B/N ratio (upto 0.3) resulted in improved mean plastic anisotropy ratio (r _m) value and high grain shape anisotropy, which has been characterized through grain aspect ratio. The desirable orientation in steel with low B/N ratio is attributed to sufficient availability of Al and N to precipitate during batch annealing. Optimum amount of boron, aluminum, and nitrogen in steel has resulted in coarse pancake structure, which is ideally suited for improved formability.