Cross-sectional study of the isokinetic muscle trunk strength among school children

Our surveys have shown lifetime prevalence of L.BP. over 30% among schoolchildren. The purpose of this study was to evaluate the relationship between back and isokinetic trunk strength, anthropometric parameters, and sports activities. One hundred and seventeen healthy children aged 10-16 years were included. All these volunteers had semi-structured interview, anthropometric and dynamic strength measurements. Lifetime prevalence of back pain was 44.5% and point prevalence was 13%. In this cross-sectional study, anthropometric and strength profiles were significantly related to age and gender. Non specific low back pain was not correlated to trunk muscle strength and/or sports activities.     

Liquid crystal-on-silicon implementation of the partial pixel three-dimensional display architecture

We report the implementation of a liquid crystal-on-silicon, three-dimensional (3-D) diffractive display based on the partial pixel architecture. The display generates multiple stereoscopic images that are perceived as a static 3-D scene with one-dimensional motion parallax in a manner that is functionally equivalent to a holographic stereogram. The images are created with diffraction gratings formed in a thin liquid crystal layer by fringing electric fields from transparent indium tin oxide interdigitated electrodes. The electrodes are controlled by an external drive signal that permits the 3-D scene to be turned on and off. The display has a contrast ratio of 5.8, which is limited principally by optical scatter caused by extraneous fringing fields. These scatter sources can be readily eliminated. The display reported herein is the first step toward a real-time partial pixel architecture display in which large numbers of dynamic gratings are independently controlled by underlying silicon drive circuitry.     

Modeling and Fabrication of CMOS Surface Acoustic Wave Resonators

A fully integrated two-port surface acoustic wave (SAW) resonator, fabricated using a standard 0.6-mum complementary metal-oxide semiconductor (CMOS) process is described in this paper. Only three micromachining processes, namely, reactive ion etching, zinc-oxide deposition, and wet etching, implemented subsequent to the standard process, are required to realize these resonators. Three design examples of these resonators are given to demonstrate the characteristics of these resonators at different operating frequencies. Experimental measurements of the S₂₁ transmission characteristics were conducted on the fabricated resonators and they were found to have parallel resonant frequencies of 1.02 GHz, 941 MHz, and 605 MHz and quality (Q) factors of 44, 86, and 285, respectively. Based on these measurements and the fabrication layers of the device, an equivalent-circuit model tailored specifically for standard CMOS two-port resonators was developed. Finite-element modeling of the SAW resonators was performed to verify the measured series resonant frequency. Comparison between the developed model and measurement characteristics was also presented. Improvement in Q factor was observed when reflector height was increased     

Wiener-based smoother and predictor for massive-MIMO downlink system under pilot contamination

One of the challenges in massive-MIMO system is pilot contamination during the channel estimation process. Pilot contamination can cause error or inaccurate channel estimation process for future fifth generation (5G) downlink transmissions. This paper considers using a Wiener-based filter to smooth and predict the channel estimation to reduce the pilot contamination for more accurate CSI during channel estimation. The simulation results show that the Wiener-based smoothing and predicting technique reduces the effect of pilot contamination and increases the accuracy of CSI during channel estimation process. Wiener smoother (WS) is implemented based on Wiener-based filtering technique. The previous estimated CSI and weight coefficient vector are used to smooth the current estimated CSI by using block data formulation to reduce the effect of pilot contamination. However, WS technique suffers from pilot contamination due to pilot training. This motivates the development of two Wiener predictors (WP), known as WP1 and WP2. The WP1 and WP2 run a prediction technique for CSI and number of pilot training during the prediction period, which is missing from the original WS. Comparison results show that the proposed WS and WP outperforms the conventional minimum mean square error and least square, in terms of channel estimation error and per-cell rate. WP2 perform better than WS and WP1 because of the algorithm complexity that required more information to be updated, stored and processed for prediction. Thus, WP2 requires large computation and matrix operation compared to WS and WP1. The results indicate that the channel estimation error due to pilot contamination can be reduced by using the Wiener-based approaches.     

In situ corrosion study of stainless steels in an MSF desalting plant

The corrosion resistance of different stainless steel grades have been studied as regards localized attack under service conditions. Test racks with welded samples with artificially applied crevices were inserted in three different flash chambers. Materials used for splash plates, brine piping and. condenser tubes were also tested.Beinge a pilot plant, various process conditions were tested. Hence, the materials have been exposed to different corrosive conditions, including stagnant seawater during shut-down periods.The results show that stainless steels of type 316L and higher alloyed exhibit good corrosion resistance, even in brine at high temperature viz pipes from the brine heater.     

Supramolecular Assembly of Aminoethylene‐Lipopeptide PMO Conjugates into RNA Splice‐Switching Nanomicelles

Phosphorodiamidate morpholino oligomers (PMOs) are oligonucleotide analogs that can be used for therapeutic modulation of pre‐mRNA splicing. Similar to other classes of nucleic acid‐based therapeutics, PMOs require delivery systems for efficient transport to the intracellular target sites. Here, artificial peptides based on the oligo(ethylenamino) acid succinyl‐tetraethylenpentamine (Stp), hydrophobic modifications, and an azide group are presented, which are used for strain‐promoted azide‐alkyne cycloaddition conjugation with splice‐switching PMOs. By systematically varying the lead structure and formulation, it is determined that the type of contained fatty acid and supramolecular assembly have a critical impact on the delivery efficacy. A compound containing linolenic acid with three cis double bonds exhibits the highest splice‐switching activity and significantly increases functional protein expression in pLuc/705 reporter cells in vitro and after local administration in vivo. Structural and mechanistic studies reveal that the lipopeptide PMO conjugates form nanoparticles, which accelerate cellular uptake and that the content of unsaturated fatty acids enhances endosomal escape. In an in vitro Duchenne muscular dystrophy exon skipping model using H2K‐mdx52 dystrophic skeletal myotubes, the highly potent PMO conjugates mediate significant splice‐switching at very low nanomolar concentrations. The presented aminoethylene‐lipopeptides are thus a promising platform for the generation of PMO‐therapeutics with a favorable activity/toxicity profile.     

Facile Fabrication of PbS Nanocrystal:C60 Fullerite Broadband Photodetectors with High Detectivity

Hybrid PbS nanocrystal/C₆₀ fullerite photodetectors are fabricated using a simple one‐step drop casting procedure onto pre‐patterned interdigitated electrodes. The devices exhibit a broad spectral response from the near UV through to the near infrared yielding a detectivity, D*, of above 10¹⁰ Jones from 400 nm to ≈1050 nm. The ability to further extend the spectral response to wavelengths ≈1350 nm in the near infrared via tuning of the PbS nanocrystal diameter is also demonstrated. The dynamic responses of the devices are presented, exhibiting a fast photocurrent rise time (<40 ns) followed by a long bi‐exponential decay with characteristic lifetimes of τ₁ = 5.3 μs ± 0.1 μs and τ₂ = 37.8 μs ± 0.7 μs. These devices, which have a detectivity approaching that of commercial detectors, a broader spectral response, and a fast rise time, offer an attractive low‐cost solution for large‐area broadband photodetectors.     

Autostereoscopic three-dimensional display based on a micromirror array

A novel approach for three-dimensional (3-D) display systems implemented with a micromirror array was proposed, designed, realized, and tested. The major advantages of this approach include the following: (1) micromirrors are reflective and hence achromatic (panchromatic), (2) a wide variety of displays can be used as image sources, and (3) time multiplexing can be introduced on top of space multiplexing to optimize the viewing zone arrangements. A two-view (left and right) 3-D autostereoscopic display system was first constructed. Left- and right-eye views in the forms of both still and motion 3-D scenes were displayed, and viewers were able to fuse the stereo information. A multiview (two left and two right) 3-D autostereoscopic display system was then simulated.     

Characterization of two-dimensional finite-aperture wire grid polarizers by a spectral-domain technique

We investigate the transmission characteristics of perfectly conducting two-dimensional wire grid polarizers fabricated in finite and infinite apertures using a rigorous spectral-domain mode-matching method. Specifically, the transmission coefficient for both transverse-electric and transverse-magnetic polarizations, extinction ratio, and diffraction pattern are characterized for a wide variety of geometric and material parameters including aperture dimension, conducting wire fill factor, wire spacing, polarizer thickness, material dielectric constants, and incident wave arrival angle. The results indicate that the transmission behavior is largely insensitive to aperture dimension.