Technological and sensorial properties of liquid nitrogen ice cream enriched with protein from brewing waste (trub)

Debittered trub (brewing waste) is an important source of protein source (70.26%). Trub and whey protein were used for 5% protein enrichment of ice cream frozen by liquid nitrogen. Three formulations were elaborated: ice cream standard (ICS), ice cream with whey protein (ICW) and ice cream with trub (ICT). Chemical composition, rheological properties, texture, overrun, melting rate, scanning electron microscopy and a sensorial test were performed. Results showed that ICT presented a higher viscosity, obtained on the upward curve up to 6.76 Pa s⁻¹, consistency index (22.96 (Pa s⁻¹)ⁿ), hysteresis area (140.40 mPa s⁻¹) and hardness (31113.33 g) but a lower melting rate (0.38 g min⁻¹), overrun (13.92%) and sensorial acceptability than the other formulations. The addition of trub debittered for protein enrichment improved ice cream properties and demonstrated that it could be used as a food ingredient.     

Extended preservation of raw beef and pork meat by hyperbaric storage at room temperature

Hyperbaric storage (HS) was evaluated as a new food preservation methodology at room temperature (RT) for beef and pork meat, both minced and in pieces, and compared to refrigeration (RF) storage. The meat samples were stored at 50, 75 and 100 MPa and variable RT up to 60 days. HS at 75 and 100 MPa could not only inhibit microbial growth but also inactivate microorganisms. Regarding physicochemical analyses, an overall equal to better pH maintenance in HS samples was achieved, and similar colour differences between HS and RF were observed. Generally, similarities in moisture content and drip loss between HS (mostly 75 and 100 MPa) and RF were detected (tendency for lower values in the former and higher values in the latter for the higher pressure level). Protein solubility revealed a decrease of sarcoplasmic protein values during storage with a pressure level dependency in some samples.     

A multiwinding modeling method for high frequency transformers and inductors

This paper presents a method to obtain an electric model for transformers and inductors, including both frequency and geometry effects in the windings, which can be linked with existing core models. One-dimensional distributions for magnetic and electric fields are assumed, and from Maxwell's equations an equivalent electric circuit is easily obtained. This equivalent circuit has been included in analog simulators (Spice, AnalogWorkBench, Saber ...), and comparisons between measured and simulated results are shown, both in time domain and in AC sweep, which verify the model accuracy. The model described in this paper allows designers to deal with key issues in the design of high-frequency magnetic components (copper losses, leakage inductance, skin and proximity effects) by using analog simulators, which are usually more familiar to them than finite-element analysis tools.     

Coupling GIS with Hydrologic and Hydraulic Flood Modelling

Geographic Information Systems (GIS) have been recognised as a powerful means to integrate and analyse data from various sources in the context of comprehensive floodplain management. As part of this comprehensive approach to floodplain management, it is very important to be able to predict the consequences of different scenarios in terms of flooded areas and associated risk. Hydrologic and hydraulic modelling plays a crucial role and there is much to gain in incorporating these modelling capabilities in GIS. This is still a rather complex task and research is being done on the full integration of these models. Interfacing between these models and GIS may be a very efficient way of overcoming the difficulties and getting very good results in terms of engineering practice. This paper presents results based on the use of Intergraph GIS coupled with Idrisi GIS. Using these two systems substantially increased the flexibility of using GIS as a tool for flood studies. A lumped (XSRAIN) and a distributed (OMEGA) hydrologic models were used to simulate flood hydrographs. The well known HEC-2 Hydraulic model was used to compute flooded areas. These models were applied in the Livramento catchment with very good results. The computation of flooded areas for different flood scenarios, and its representation in GIS, can be used in the assessment of affected property and associated damages. This is a very useful GIS-based approach to floodplain management.     

Nephelometric study of salivary protein–tannin aggregates

Grape seed procyanidins were fractionated through different degrees of polymerisation, and human saliva was purified and separated into two fractions: one was mostly α‐amylase and the other was essentially proline‐rich proteins (PRPs). The interaction of these proteins with the procyanidin compounds was assayed using nephelometry, and the influence of several factors was investigated, such as degree of polymerisation, pH and concentrations of both protein and tannin. The same experiments were performed with bovine serum albumin (BSA). The amount of insoluble aggregates, resulting from the formation of polyphenol–protein aggregates, increased quickly up to a maximum value which thereafter remained practically unchanged. pH was set at 5.0 for all further assays, since it was the nearest value to that encountered in human saliva (pH 5.6–7.9), where proteins were stable and had a maximum ability to bind and precipitate procyanidin oligomers. These proteins were shown to have a strong affinity for procyanidin oligomers and were unable to resolubilise the polyphenol–protein aggregates when present in excess. PRPs required a much lower content to bind all the tannins (400 µg of procyanidin oligomers) than BSA and especially α‐amylase (48, 60 and 132 µg respectively). The procyanidin's ability to bind PRPs, BSA and α‐amylase increased with its average molecular weight. This ability increased regularly for PRPs up to 4500 Da, whereas the ability to bind the globular proteins decreased beyond 3400 Da. © 2001 Society of Chemical Industry     

Second primitive malignant tumour in patients with gynaecological cancer

OBJECTIVE: The purpose of this study was to characterise the occurrence of multiple primitive gynaecological malignant neoplasias, restricted to the genital tract and breast or associated with other organs, and to detect which types of association are most frequent concerning location, histology and staging. POPULATION AND METHODS: The records of patients with gynaecological cancer at the Portuguese Institute of Oncology--Lisbon Centre, between 1986 and 1993 were used in this study. RESULTS: Of the 10,746 women with gynaecological cancer, 91 (0.8%) were found to have a second primitive malignant neoplasia. Of these neoplasias, 64% (58 cases) were also located at a gynaecological site. The most frequent associations were endometrium/breast (13 cases), bilateral breast (12 cases) and ovary/endometrium (11 cases). The majority of primitive multiple gynaecological tumours were synchronous. Regarding gynaecological cancer and non-gynaecological cancer, in 28 cases (31%), the most common non-gynaecological location was the colon/rectum. Five patients had triple tumours. CONCLUSION: Although these situations are relatively rare the possibility of multiple primitive cancers should be considered with the presence of malignant tumours in two or more organs. This distinction between multiple primitive or metastatic cancers could be important for treatment as well as prognosis.     

Analysis of amyloid deposition in a transgenic mouse model of homozygous familial amyloidotic polyneuropathy

Amyloid fibrils derived from the Japanese, Portuguese, and Swedish types of familial amyloidotic polyneuropathy all consist of a variant transthyretin (TTR) with a substitution of methionine for valine at position 30 (TTR Met 30). In an attempt to establish an animal model of TTR Met-30-associated homozygous familial amyloidotic polyneuropathy and to study the structural and functional properties of human TTR Met 30, we generated a mouse line carrying a null mutation at the endogenous ttr locus (ttr-/-) and the human mutant ttr gene (6.0-hMet 30) as a transgene. In these mice, human TTR Met-30-derived amyloid deposits were first observed in the esophagus and stomach when the mice were 11 months of age. With advancing age, amyloid deposits extended to various other tissues. Because no significant difference was detected in the onset, progression, and tissue distribution of amyloid deposition between the ttr-/- and ttr+/+ transgenic mice expressing 6.0-hMet 30, endogenous normal mouse TTR probably does not affect the deposition of human TTR Met-30-derived amyloid in mice. TTR is a tetramer composed of four identical subunits that binds thyroxine (T4) and plasma retinol-binding protein. The introduction of 6.0-hMet 30 into the ttr-/- mice significantly increased their depressed serum levels of T4 and retinol-binding protein, suggesting that human TTR Met 30 binds T4 and retinol-binding protein in vivo. The T4-binding ability of human TTR Met 30 was confirmed by the analysis of T4-binding proteins in the sera of ttr-/- transgenic mice expressing 6.0-hMet 30. The T4-binding studies also demonstrated the presence of hybrid tetramers between mouse and human TTR subunits in the ttr+/+ transgenic mice expressing 6.0-hMet 30.     

Fabry Disease and the Heart: A Comprehensive Review

Fabry disease (FD) is an X-linked lysosomal storage disorder caused by mutations of the GLA gene that result in a deficiency of the enzymatic activity of α-galactosidase A and consequent accumulation of glycosphingolipids in body fluids and lysosomes of the cells throughout the body. GB3 accumulation occurs in virtually all cardiac cells (cardiomyocytes, conduction system cells, fibroblasts, and endothelial and smooth muscle vascular cells), ultimately leading to ventricular hypertrophy and fibrosis, heart failure, valve disease, angina, dysrhythmias, cardiac conduction abnormalities, and sudden death. Despite available therapies and supportive treatment, cardiac involvement carries a major prognostic impact, representing the main cause of death in FD. In the last years, knowledge has substantially evolved on the pathophysiological mechanisms leading to cardiac damage, the natural history of cardiac manifestations, the late-onset phenotypes with predominant cardiac involvement, the early markers of cardiac damage, the role of multimodality cardiac imaging on the diagnosis, management and follow-up of Fabry patients, and the cardiac efficacy of available therapies. Herein, we provide a comprehensive and integrated review on the cardiac involvement of FD, at the pathophysiological, anatomopathological, laboratory, imaging, and clinical levels, as well as on the diagnosis and management of cardiac manifestations, their supportive treatment, and the cardiac efficacy of specific therapies, such as enzyme replacement therapy and migalastat.     

A linear algebra approach to OLAP

Inspired by the relational algebra of data processing, this paper addresses the foundations of data analytical processing from a linear algebra perspective. The paper investigates, in particular, how aggregation operations such as cross tabulations and data cubes essential to quantitative analysis of data can be expressed solely in terms of matrix multiplication, transposition and the Khatri–Rao variant of the Kronecker product. The approach offers a basis for deriving an algebraic theory of data consolidation, handling the quantitative as well as qualitative sides of data science in a natural, elegant and typed way. It also shows potential for parallel analytical processing, as the parallelization theory of such matrix operations is well acknowledged.