Review on zirconate-cerate-based electrolytes for proton-conducting solid oxide fuel cell

The performance of low-to-intermediate temperature (400–800?°C) solid oxide fuel cells (SOFCs) depends on the properties of electrolyte used. SOFC performance can be enhanced by replacing electrolyte materials from conventional oxide ion (O^2-) conductors with proton (H⁺) conductors because H⁺ conductors have higher ionic conductivity and theoretical electrical efficiency than O^2- conductors within the target temperature range. Electrolytes based on cerate and/or zirconate have been proposed as potential H⁺ conductors. Cerate-based electrolytes have the highest H⁺ conductivity, but they are chemically and thermally unstable during redox cycles, whereas zirconate-based electrolytes exhibit the opposite properties. Thus, tailoring the properties of cerate and/or zirconate electrolytes by doping with rare-earth metals has become a main concern for many researchers to further improve the ionic conductivity and stability of electrolytes. This article provides an overview on the properties of four types of cerate and/or zirconate electrolytes including cerate-based, zirconate-based, single-doped cerate–zirconate and hybrid-doped cerate–zirconate. The properties of the proton electrolytes such as ionic conductivity, chemical stability and sinterability are also systematically discussed. This review further provides a summary of the performance of SOFCs operated with cerate and/or zirconate proton conductors and the actual potential of these materials as alternative electrolytes for proton-conducting SOFC application.     

Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

Isometric Texture Mapping for Free-form Surfaces

Texture mapping is a frequently exploited technique in computer graphics aimed at the emulation of high-resolution details in surfaces. In this paper we present a distance-ratios preservation method for bivariate raster texture mapping to free-form surfaces in an arbitrarily precise manner. The proposed method reduces the original general problem of computing the inverse of a three-dimensional parametric surface mapping into a problem of two-dimensional image warping. Several examples that demonstrate the proposed approach are also provided.     

Shortcoming, problems and analytical comparison for flooding-based search techniques in unstructured P2P networks

Peer-to-Peer networks attracted a significant amount of interest because of their capacity for resource sharing and content distribution. Content distribution applications allow personal computers to function in a coordinated manner as a distributed storage medium by contributing, searching, and obtaining digital content. Searching in unstructured P2P networks is an important problem, which has received considerable research attention. Acceptable searching techniques must provide large coverage rate, low traffic load, and optimum latency. This paper reviews flooding-based search techniques in unstructured P2P networks. It then analytically compares their coverage rate, and traffic overloads. Our simulation experiments have validated analytical results.     

维吾尔新文字大小写同形字母的识别

为有效识别出新维文中大小写同形字母,分析新维文的特点,提出一种基于模板匹配的大小写同形字母识别算法。根据同形字母中大写字母外轮廓大而小写字母外轮廓小的特点,统计字母外轮廓大小与全文字母外轮廓平均大小的比例值,进行字母的大小写判断。分析结果表明,该方法有效克服了传统模板匹配方法容易混淆同形字母的大小写的缺点,提高了系统的识别率。     

印刷哈萨克斯拉夫粘连字符的切分方法

哈萨克斯拉夫图像文本经过行切分和列切分后,存在水平方向接触和垂直方向重叠的粘连字符。为提高字符识别率,依据字符连通域的最小外接矩形切分开垂直方向重叠的粘连字符图像块;利用判决条件:字符宽度概率密度分布图、字符图像块垂直投影的波峰数目和字符图像块垂直投影波峰的对称性,分离初始粘连字符图像块中正确的单个字符图像块和实际接触的粘连字符图像块;在允许的字符宽度范围内,寻找粘连字符图像垂直投影图的极小值点,以切分实际接触的粘连字符。实验结果表明,该方法泛化能力较好且识别率有明显提高。     

尿素嵌入法制备纤维素氨基甲酸酯的研究

探讨了尿素嵌入法制备纤维素氨基甲酸酯(CC)的生产工艺。指出:选用聚合度为450~625、α-纤维素含量大于90/的纤维素浆粕,用14/~16/的氢氧化钠溶液,于40~50℃条件下活化处理30~40min后,与尿素以1∶2~3的比例混合,在137℃的二甲苯体系中反应2~3h,便可得到含氮量为2.4/~3.5/的纤维素氨基甲酸酯产物。该产物在氢氧化钠溶液中可形成良好的稳定溶液,过滤性好,可直接用于纺丝。     

Modeling and Simulation for Transient Thermal Analyses Using a Voltage-in-Current Latency Insertion Method

This article presents a modeling and simulation method for transient thermal analyses of integrated circuits (ICs) using the original and voltage-in-current (VinC) latency insertion method (LIM). LIM-based algorithms are a set of fast transient simulation methods that solve electrical circuits in a leapfrog updating manner without relying on large matrix operations used in conventional Simulation Program with Integrated Circuit Emphasis (SPICE)-based methods which can significantly slow down the solution process. The conversion from the thermal to electrical model is performed first by using the analogy between heat and electrical conduction. Since electrical inductance has no thermal equivalence, a modified VinC LIM formulation is presented which removes the requirement of the insertion of fictitious inductors. Numerical examples are presented, which show that the modified VinC LIM formulation outperforms the basic LIM formulation, in terms of both stability and accuracy in the transient thermal simulation of ICs.     

Phase Distribution and Magnetic Properties of Mechanically Alloyed Hard/Soft Ferrite Nanocomposites

Improvement in the magnetic properties of hard/ soft ferrite nanocomposites was studied by varying the composition of the soft phase in SrFe₁₂O₁₉/Ni_0.5Zn_0.5Fe₂O₄ nanocomposites. The SrFe₁₂O₁₉/Ni_0.5Zn_0.5Fe₂O₄ nanocomposites were prepared using the mechanical alloying method. The samples were prepared by varying the amount of the soft phase from 10 to 50 wt% while the amount of the hard phase remained 100 wt% in the ferrite nanocomposites. X-ray diffraction (XRD), a vibrating sample magnetometer (VSM), and a transmission electron microscope (TEM) were used to characterize the samples. From the result, it was found that the nanocomposite magnet with 10 wt% of soft phase content had the highest remanence ratio, M _r / M _s , which was 0.61, while the values of the coercivity, H _c , and magnetization, M _s , measured were 4482.4 G and 9.71 emu/g, respectively, and the average particle size of the ferrite nanocomposites was < 50 nm for all the samples. It was also shown that H _c decreased as the weight percent of the soft ferrite increased, which resulted from the dipolar interaction that occurred in the ferrite nanocomposites, showing the effect of phase distribution on the magnetic properties.     

Characterisation of sol–gel method synthesised MgZnFe2 O4 nanoparticles and its cytotoxic effects on breast cancer cell line,MDA MB‐231 in vitro

In this study, nanocrystalline magnesium zinc ferrite nanoparticles were successfully prepared by a simple sol–gel method using copper nitrate and ferric nitrate as raw materials. The calcined samples were characterised by differential thermal analysis/thermogravimetric analysis, Fourier transform infrared spectroscopy and X‐ray diffraction. Transmission electron microscopy revealed that the average particle size of the calcined sample was in a range of 17–41 nm with an average of 29 nm and has spherical size. A cytotoxicity test was performed on human breast cancer cells (MDA MB‐231) and (MCF‐7) at various concentrations starting from (0 µg/ml) to (800 µg/ml). The sample possessed a mild toxic effect toward MDA MB‐231 and MCF‐7 after being examined with MTT (3‐[4, 5‐dimethylthiazol‐2‐yl]‐2, 5 diphenyltetrazolium bromide) assay for up to 72 h of incubation. Higher reduction of cells viability was observed as the concentration of sample was increased in MDA MB‐231 cell line than in MCF‐7. Therefore, further cytotoxicity tests were performed on MDA MB‐231 cell line.Inspec keywords: sol‐gel processing, nanoparticles, nanofabrication, magnesium compounds, zinc compounds, toxicology, biological organs, cancer, cellular biophysics, nanomedicine, calcination, differential thermal analysis, Fourier transform infrared spectra, X‐ray diffraction, transmission electron microscopy, particle size, organic compoundsOther keywords: sol‐gel method, cytotoxic effects, breast cancer cell line, MDA MB‐231 in vitro, nanocrystalline magnesium zinc ferrite nanoparticles, copper nitrate, ferric nitrate, raw materials, calcined samples, differential thermal analysis, thermogravimetric analysis, Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, average particle size, cytotoxicity testing, human breast cancer cells, mild toxic effect, 3‐[4,5‐dimethylthiazol‐2‐yl]‐2,5 diphenyltetrazolium bromide) assay, cell viability, MCF‐7, MDA MB‐231 cell line, size 17 nm to 41 nm