Effect of Boronizing on Operating Stability of Steel AISI 304L under Erosion Impact of Hard Particles

Metal Science and Heat Treatment - The effect of solid boronizing at 950°C for 2 and 4 h on the phase composition, microstructure, hardness and abrasive wear of steel AISI 304L is studied...     

Second harmonic generation from a ferroelectric film

We derive an expression for transmittivity (T_SHG) of second harmonic generation (SHG) signals from a ferroelectric (FE) film. Intensities of up and down fields in the medium are investigated in relation to T_SHG. The derivations are made based on undepletion of input fields and nonlinear wave equation derived from the Maxwell equations. We present two cases: film without mirrors and with partial mirrors. Expressions for the newly derived nonlinear susceptibility coefficients of SHG for real crystal symmetry [J. Opt. Soc. Am. B 19 (2002) 2007] are used to get more realistic results. Variations in T_SHG with respect to film thickness are illustrated.     

Synthesis of heterocyclic metal complexes and their evaluation as marine antifoulants

4-Amino-3-thio-1,24-triazolidine (L₁) and 4-amino-5-thio-1,3,4-thiadiazole (L_II) as well as their metal complexes of the general formulae ML_I·2H₂O and ML_IICl (M; Pb(II), Cd(II) and Zn(II)) were prepared. With Sn(II), we obtained Sn(L_I)₂·2H₂O and SnL_IICl, respectively. The structures of the compounds were identified through elemental analysis, and IR and UV spectra measurements, in addition to thermal analysis in case of the metal complexes. The antifouling properties of the compounds were tested by their incorporation into paint formulations which were applied to PVC substrates and tested in water from Alexandria western harbour. When the compounds were added at 17·5% by volume, the coated panels were fouled after 3 months of immersion. The addition of 6·7% by volume of tributyltin oxide to 15·8% of the prepared compounds in one formulation elevated the paint efficiency and prevented fouling for 11 months. Paint containing solely tributyltin oxide at the same concentration was inactive against algae.     

THE ELECTROIMPACT COMPACTION OIF POWDERS: MECHANICS, STRUCTURE AND PROPERTIES

An electroimpact compaction method recently developed for powder consolidation is described In terms of the basic principles of electric discharge and dynamic compaction processes. The influence of processing parameters, microstructural characteristics and mechanical properties of preforms obtained are discussed. Mathematical models for the mechanics of compaction, electrical resistance, discharge current variations and comparisons with experimental results are presented. The best set of properties are obtained when electrical discharge is applied to cause interparticle fusion at the instant when dynamic compaction pressure attains its peak level.     

Alumina scale growth at zirconia-MCrAlY interface: a microstructural study

High-temperature oxide scale growth at the ceramic-metal interface is a major contributor to the thermomechanical resistance of thermal barrier coatings for hot stages of gas turbines. In order to better understand this phenomenon, microstructural observations of the alumina scales formed at 1100 and 1200 °C under air, between low-pressure plasma-sprayed NiCrAlY and air plasma-sprayed ZrO₂-8.5 wt % Y₂O₃, have been performed by classical and analytical transmission electron microscopy on transverse thin foil specimens. The evolution of the oxide grain morphology from the metal-oxide to the oxide-oxide interface suggests that the scale growth principally takes place at the metal-oxide interface. Segregation of yttrium at oxide grain boundaries has been detected as well as significant quantities of zirconium inside the alumina grains. The oxide growth seems to be dominated by a classical grain-boundary oxygen diffusion mechanism. The presence of zirconium inside the alumina grains also suggests that Al₂O₃ partially forms by chemical reduction of ZrO₂ by AI. The comparison between the microstructures observed and that of alumina scales grown under similar conditions on bare MCrAlY alloys gives some insight into how the ceramic top-coat modifies NiCrAlY high-temperature oxidation mechanisms.     

Poly-functional Catalyst Development for Benzene Production from Alkyl-aromatic Mixture via Hydrodealkylation

Development of a poly-functional catalyst that has higher hydrodealkylation activity based on 15% Cr/γ- Al₂ O₃ was researched for benzene production from an alkyl-aromatic mixture via hydrodealkylation. For this goal, the effects of the promoters like Fe, Co, or Ni and their concentrations on the activity of a Cr/Al₂ O₃ catalyst were investigated. Toluene + n-heptane + tetrahydrotiophene (89:10:1 w%) model mixture, which has the same content as industrial aromatics, was used as feedstock. The activities of catalysis in reactions of hydrodealkylation, hydrocracking, and hydrogenolize with respect to conversions of toluene, heptane, and tetrahydrotiophene were tested, respectively. As to the obtained results, the catalyst including 5% Fe has a higher hydrodealkylation activity, compared to the catalyst including Co, and especially to the alumocrom catalyst not including a promoter, while it has a lower coke formation and reduced activity to the catalyst including Ni.     

Capacitated Clustering Problems by Hybrid Simulated Annealing and Tabu Search

The capacitated clustering problem (CCP) is the problem in which a given set of weighted objects is to be partitioned into clusters so that the total weight of objects in each cluster is less than a given value (cluster ‘capacity’). The objective is to minimize the total scatter of objects from the ‘centre’ of the cluster to which they have been allocated. A simple constructive heuristic, a R-interchange generation mechanism, a hybrid simulated annealing (SA) and tabu search (TS) algorithm which has computationally desirable features using a new non-monotonic cooling schedule, are developed. A classification of the existing SA cooling schedules is presented. The effects on the final solution quality of the initial solutions, the cooling schedule parameters and the neighbourhood search strategies are investigated. Computational results on randomly generated problems with size ranging from 50 to 100 customers indicate that the hybrid SA/TS algorithm out-performs previous simulated annealing algorithms, a simple tabu search and local descent algorithms.     

Short-term preoperative radiotherapy results in down-staging of rectal cancer: a study of 1316 patients

OBJECTIVE: The incidence of back pain in children in our country is unknown. Several causes can produce this symptom, but it is necessary to rule out pathologies that require specific treatments. The goal of this work was to study the incidence and the etiology of back pain in children in our country. PATIENTS AND METHODS: We present a prospective study done in our Orthopedic Department during a period of 7 months. Twenty-two patients were referred with back pain of at least two months duration. The incidence was 2.9% compared to the total number of patients. The average age ranged from 7 to 17 years. RESULTS: A careful history and a radiological examination diagnosed 50% (11 cases) of the causes of backache in the present study. An idiopathic etiology was the most frequent cause and represented 9 patients (41%). In the remaining 12 cases (59%) pathological causes that required special treatment were identified including 2 cases of Scheuermann disease, 4 cases of painful scoliosis, 3 spondylolysis with spondylolisthesis, 2 cases of discitis, 1 benign neoplasm and 1 psychogenic cause. CONCLUSIONS: We recommend conservative management with the use of medication for relief of pain and physical therapy in the idiopathic cases. In the remaining cases, the specific treatment of the disease can improve the back pain.     

A STOCHASTIC CHARACTERIZATION OF THE MACHINE TOOL WORKPIECE SYSTEM IN BTA OEEP HOLE MACHINING Part I: Mathematical Modelling and Analysis

A three dimensional model of the BTA deep-hole machining system is presented by modelling each of the components separately and later combining to represent the total system. A model for the interaction between the workpiece and the cutting tool is also included. Such a model can determine the response of any component of the machine tool as well as the individual influence on the system performance. Based on this, physical models representing the three working methods in the BTA process can be studied, from which stochastic differential equations are derived to represent the resultant force system on the machine tool

A physical model for the stationary workpiece and rotating cutting tool working method is developed. The assumed modes method along with the Lagrange' equation is used to obtain the stochastic differential equation to represent the influence of axial force and torque, in order to obtain the response of the system under the action of the axial force and torque to predict the stability behaviour.     

Cellular neural network with trapezoidal activation function

This paper presents a cellular neural network (CNN) scheme employing a new non‐linear activation function, called trapezoidal activation function (TAF). The new CNN structure can classify linearly non‐separable data points and realize Boolean operations (including eXclusive OR) by using only a single‐layer CNN. In order to simplify the stability analysis, a feedback matrix W is defined as a function of the feedback template A and 2D equations are converted to 1D equations. The stability conditions of CNN with TAF are investigated and a sufficient condition for the existence of a unique equilibrium and global asymptotic stability is derived. By processing several examples of synthetic images, the analytically derived stability condition is also confirmed. Copyright © 2005 John Wiley & Sons, Ltd.