Strain rate sensitivity of the commercial aluminum alloy AA5182-O

The mechanical behavior of the commercial aluminum alloy AA5182-O is investigated at temperatures ranging from −120 to 150 °C and strain rates from 10⁻⁶ to 10⁻¹ s⁻¹. The strain rate sensitivity parameter is determined as a function of temperature and plastic strain, and the strain rate and temperature range in which dynamic strain aging leads to negative strain rate sensitivity is mapped. The effect of dynamic strain aging on ductility and strain hardening is investigated. The sensitivity of the measured quantities to the experimental method employed and their dependence on grain shape are discussed. The experimental data are compared with the predictions of a model constructed based on a recently proposed mechanism for dynamic strain ageing. The mechanism is based on the effect solute clustering at forest dislocations has on the strength of dislocation junctions. The model is shown to reproduce qualitatively the experimental trends.     

DIChirp: direct injection bandwidth estimation

Ideally, network bandwidth estimation algorithms should be independent of the end system performance. If end system capabilities are involved, then the measurement will be of the system throughput and will not indicate a correct assessment of network bandwidth. Packet dispersion‐based active bandwidth estimation schemes including Pathload, TOPP and pathChirp use delay correlation where the network‐induced delay on packets transmitted at certain rates is translated into bandwidth estimation. Since packet dispersion‐based active measurement schemes use delay correlation, bandwidth estimations are distorted by the host protocol stack‐induced delay variations. Studies revealed that the host protocol stack‐induced delay variations due to context switching are stovepiped in the network‐induced delay variations and impact the measurement process. This study explores the delay variations introduced by the host protocol stack in packet dispersion‐based techniques. The impact of host protocol delay variations and context switching on bandwidth estimation is analyzed and a new active bandwidth estimation tool minimizing the impact of context switching is proposed. Direct Injection Chirp (DIChirp) bypasses the TCP/IP protocol stack and directly interfaces with the network hardware. It uses the kernel for scheduling the outgoing packets, thus achieving more accurate estimation of bandwidth. Experiments revealed that the host protocol and context switching‐induced delay variations can be as high as 800µs and could result in bandwidth estimation errors near 20%. Experiments also revealed that the DIChirp is superior to the pathChirp implementation in performance estimation since the datapath utilized by DIChirp is less prone to delay variations induced by context switching. Copyright © 2007 John Wiley & Sons, Ltd.     

Reliability-Aware Heterogeneous 3D Chip Multiprocessor Design

Ability to stack separate chips in a single package enables three-dimensional integrated circuits (3D ICs). Heterogeneous 3D ICs provide even better opportunities to reduce the power and increase the performance per unit area. An important issue in designing a heterogeneous 3D IC is reliability. To achieve this, one needs to select the data mapping and processor layout carefully. This paper addresses this problem using an integer linear programming (ILP) approach. Specifically, on a heterogeneous 3D CMP, it explores how applications can be mapped onto 3D ICs to maximize reliability. Preliminary experiments indicate that the proposed technique generates promising results in both reliability and performance.     

Respiratory motion of the heart from free breathing coronary angiograms

Respiratory motion compensation for cardiac imaging requires knowledge of the heart's motion and deformation during breathing. This paper presents a method for measuring the natural tidal respiratory motion of the heart from free breathing coronary angiograms. A three-dimensional (3-D) deformation field describing the cardiac and respiratory motion of the coronary arteries is recovered from a biplane acquisition. A cardiac respiratory parametric model is formulated and used to decompose the deformation field into cardiac and respiratory components. Angiograms from ten patients were analyzed. A 3-D translation motion model was sufficient for describing the motion of the heart in only two patients. For all patients, the heart translated caudally (mean, 4.9+/-1.9 mm; range, 2.4 to 8.0 mm) and underwent a cranio-dorsal rotation (mean, 1.5 degrees+/-0.9 degrees; range, 0.2 degrees to 3.5 degrees) during inspiration. In eight patients, the heart also translated anteriorly (mean, 1.3+/-1.8 mm; range, -0.4 to 5.1 mm) and rotated in a caudo-dextral direction (mean, 1.2 degrees+/-1.3 degrees; range, -1.9 degrees to 3.2 degrees).     

Novel T-rail electrodes for substrate removed low-voltage high-speed GaAs/AlGaAs electrooptic modulators

A novel traveling-wave electrode utilizing capacitively loaded T-rail elements was developed for low-voltage high-speed substrate-removed GaAs/AlGaAs electrooptic modulators. Electrodes with varying dimensions were fabricated and characterized. Electrode phase velocity, characteristic impedance, loss coefficient, and capacitive loading were extracted from the measured s-parameters up to 40 GHz. Electrode was also simulated using a finite-element solver. The measured and calculated electrode capacitance values were found to be in excellent agreement, showing that the electrode can be precisely designed. Approaches were outlined to provide a group velocity-matched very high-speed modulator electrode suitable for a low drive-voltage substrate-removed GaAs/AlGaAs electro-optic modulator     

Lipoprotein Subfraction Profile and HDL-Associated Enzymes in Sickle Cell Disease Patients

Although hypocholesterolemia is a reported finding in sickle cell disease (SCD), low-density lipoprotein (LDL)/high-density lipoprotein (HDL) subfractions and HDL-associated enzymes have not been determined in SCD patients. Blood was collected from 38 hemoglobin (Hb)A volunteers and 45 homozygous HbSS patients who had not received blood transfusions in the last 3 months. Serum lipids were measured by automated analyzer while LDL and HDL subfraction analysis was done by continuous disc polyacrylamide gel electrophoresis. Serum levels of cholesteryl ester transfer protein (CETP), lecithin-cholesterol acyltransferase (LCAT), apolipoprotein B (apoB) and apolipoprotein A-1 (apoA-I) were determined by enzyme-linked immunosorbent assay (ELISA). Total cholesterol (TC), low-density lipoprotein cholesterol (LDL-C) and high-density lipoprotein cholesterol (HDL-C) levels were significantly decreased, while TG levels were significantly increased in SCD patients compared to controls. A significant decrease in intermediate-density lipoprotein (IDL)-C, IDL-B, IDL-A and LDL-1 fractions were seen in SCD patients, while no significant difference was observed in small dense LDL particles. A significant decrease was seen in HDL-large, HDL-intermediate and HDL-small fractions in SCD patients versus controls. Levels of LCAT and ApoA-1 protein measured in SCD patients were significantly lower while no significant difference was observed in CETP and ApoB protein levels compared to controls. The reduction observed in LDL- and HDL-C in SCD patients was reflected as significantly decreased IDL, LDL-1 and HDL-subfractions. Decreased HDL subfractions may possibly lead to the reduced ApoA-1 and LCAT protein levels observed in SCD patients.     

Improving hydrophobicity on polyurethane-based synthetic leather through plasma polymerization for easy care effect

This study reports on the deposition of a hydrophobic coating on polyurethane (PU)-based synthetic leather through a plasma polymerization method and investigates the hydrophobic behavior of the plasma-coated substrate. The silicon compound of hexamethyldisiloxane (HMDSO), inactive gas argon (Ar), and toluene were used to impart surface hydrophobicity to a PU-based substrate. Surface hydrophobicity was analyzed by water contact angle measurements. Surface hydrophobicity was increased by deposition of compositions of 100% HMDSO, 3:1 HMDSO/toluene, and 1:1 HMDSO/toluene. Optimum conditions of 40 W, 30 s plasma treatment resulted in essentially the same initial contact angle results of approximately 100° for all three treatment compositions. The initial water contact angle for untreated material was about 73°. A water droplet took 1800 s to spread out on the plasma-treated sample after it had been placed on the sample surface. An increase in plasma power also led to a decrease in contact angle, which may be attributed to oxidization of HMDSO during plasma deposition. XPS analysis showed that plasma polymerization of HMDSO/toluene compositions led to a significant increase in atomic percentage of Si compound responsible for the hydrophobic surface. The easy clean results for the treated and untreated PU-based synthetic leather samples clearly showed that the remaining stain on the plasma-polymerized sample was less than that of untreated sample. The plasma-formed coating was both hydrophobic and formed a physical barrier against water and stain.     

Masking the Peroxidase-Like Activity of the Molybdenum Disulfide Nanozyme Enables Label-Free Lipase Detection

Two-dimensional MoS₂ nanoparticles (2D-nps) exhibit artificial enzyme properties that can be regulated at bio-nanointerfaces. We discovered that protein lipase is able to tune the peroxidase-like activity of MoS₂ 2D-nps, offering low-nanomolar, label-free detection and identification in samples with unknown identity. The inhibition of the peroxidase-like activity of the MoS₂ 2D-nps was demonstrated to be concentration dependent, and as low as 5 nm lipase was detected with this approach. The results were compared with those obtained with several other proteins that did not display any significant interference with the nanozyme behavior of the MoS₂ 2D-nps. This unique response of lipase was characterized and exploited for the successful identification of lipase in six unknown samples by using qualitative visual inspection and a quantitative statistical analysis method. The developed methodology in this approach is noteworthy for many aspects; MoS₂ 2D-nps are neither labeled with a signaling moiety nor modified with any ligands for signal readout. Only the intrinsic nanozyme activity of the MoS₂ 2D-nps is exploited for this detection approach. No analytical equipment is necessary for the visual detection of lipase. The synthesis of the water-soluble MoS₂ 2D-nps is low costing and can be performed in bulk scale. Exploring the properties of 2D-nps and their interactions with biological materials reveals highly interesting yet instrumental features that offer the development of novel bioanalytical approaches.     

Synthesis and Characterization of a Bis-Pyrazoline Derivative as Corrosion Inhibitor for A283 Carbon Steel in 1M HCl: Electrochemical,Surface, DFT and MD Simulation Studies

Protection of Metals and Physical Chemistry of Surfaces - The effect of a new synthesized bis-pyrazoline derivative namely: 5,5'-(1,4-phenylene) bis [1?formyl-4,5-dihydro-3-phenyl-1H...