Design of high-speed data transfer turbo code for body channel communication transceivers

In this work, a digital differential transmitter based on low-power wireless compensation transceiver for body channel communication (BCC) is proposed. Further, the proposed transceiver is composed of Touch Status Detection Unit (TSDU), Wireless Status Compensation Unit (WSCU), and a reconfigurable preamplifier. Initially, the human body channel environment for wireless communication is investigated based on properties from 1 to 100 MHz. Further, the turbo code-based encoding scheme is used to encode the data before transferring the data on the transmitter side. Also, the proposed error-correcting parallel turbo decoder using a modified step-by-step algorithm is presented. The turbo code-based decoding scheme is used to recover the error-free transmitted data at the receiver side. Results demonstrate that the proposed BCC transceiver is designed using 90 nm CMOS technology and it is observed that the proposed BCC transceiver has utilized an area of 600mm². Also, the maximum data rate achieved by a proposed BCC transceiver was 100 Mbps, and the overall transceiver power consumption is 0.42 mW, and energy for communication is 0.02 nj/b.     

Developing a virtual machining model to generate MTConnect machine-monitoring data from STEP-NC

The ability to predict performance of manufacturing equipment during early stages of process planning is vital for improving efficiency of manufacturing processes. In the metal cutting industry, measurement of machining performance is usually carried out by collecting machine-monitoring data that record the machine tool’s actions (e.g. coordinates of axis location and power consumption). Understanding the impacts of process planning decisions is central to the enhancement of the machining performance. However, current methodologies lack the necessary models and tools to predict impacts of process planning decisions on the machining performance. This paper presents the development of a virtual machining model (called STEP2M model) that generates machine-monitoring data from process planning data. The STEP2M model builds upon a physical model-based analysis for the sources of energy on a machine tool, and adopts STEP-NC and MTConnect standardised interfaces to represent process planning and machine-monitoring data. We have developed a prototype system for 2-axis turning operation and validated the system by conducting an experiment using a Computer Numerical Control lathe. The virtual machining model presented in this paper enables process planners to analyse machining performance through virtual measurement and to perform interoperable data communication through standardised interfaces.     

In-vitro digestibility,textural and quality characteristics of ditalini pasta fortified with green banana flour and its type -IV modified starch

Resistant starch in unripe banana offers a possibility to alter the glycemic properties in convenience foods, such as pasta. In this study, pasta formulations were tried by replacing 30% semolina with varying proportions of green banana flour (GBF) and banana-modified starch (MS). The effect of substitution on physicochemical and functional properties, including in-vitro starch digestibility, antioxidant property and consumer acceptability, was evaluated. Among the composite flours, MS recorded higher swelling power and water holding capacity. The replacement of semolina with GBF resulted in higher resistant starch, 4–5 times enhanced indigestible fraction, phenols, flavonoids and antioxidant activity in pasta. Pronounced increment was also observed in potassium, calcium and magnesium content in blended pasta. Optimal cooking time was reduced with the addition of GBF, whereas it was enhanced with MS. GBF and MS in the blends, decreased the hydrolysis rate (up to 24%) and glycemic index (up to 17%) of pasta. However, the addition of MS beyond 10% negatively influenced springiness and chewiness. Microstructural studies explained the positive structural changes with the addition of GBF and MS. Sensory attributes disclosed that the addition of 25% GBF and 5% MS is a desirable proportion for pasta with a functional characteristics.     

Preparation of a functional nanofibrous polymer membrane incorporated with poly(2-aminothio phenol) stabilized gold nanoparticles

Functional nanofibrous polymer membranes were prepared by incorporating poly(2-aminothio phenol) (P2AT) stabilized Au NPs onto electrospun polyvinylidene fluoride (PVdF) nanofibers (designated as P2AT-Au NPs@PVdF-NFM). The preparation of P2AT-Au NPs@PVdF-NFM involves two steps: loading of 2AT (monomer) into electrospun PVdF nanofibrous membrane and polymerization of 2AT by gold chloride. P2AT and Au NPs were simultaneously formed into the electrospun PVdF-NFM. Transmission electron microscope image of P2AT-Au NPs@PVdF-NFM informs the presence of Au NPs (with sizes ~10 nm) onto PVdF-NFM.     

Electrical conduction in evaporated terbium fluoride thin films

The current-voltage characteristics of thin-film capacitors with evaporated terbium fluoride dielectric have been studied as a function of temperature (in the range 300 to 418 K). For sufficiently high electric fields (> 10⁴ V cm^–1, the leakage current is found to increase exponentially with the square root of the applied electric field. Analysis of the data suggests an electrode-limited mechanism such as that suggested by Schottky. It is seen that the conduction mechanism is an activated process with the activation energy decreasing with increasing field. Dielectric break-down and its dependence on film thickness have also been investigated. Break-down field strength follows the Forlani-Minnaja relation.     

Template-free mechanochemical route to prepare crystalline and electroactive polydiphenylamine nanostructures

A facile and sustainable mechanochemical route for the synthesis of undoped polydiphenylamine (PDPA) and inorganic acid doped nanostructures are reported. Field emission scanning electron microscopic (FESEM) images highlighted the formation of distinctly different nanostructures for each of the inorganic acid doped PDPA. Elemental analysis carried out for the polymers revealed the presence of more repeating units in their backbone. The X-ray diffraction (XRD) results of the as-prepared PDPA nanostructures indicated the high degree of crystallinity ever reported for PDPA. Spectroscopic profile of the polymers showed that the prepared PDPA is in a doped conducting form. Electrochemical studies performed for the polymeric particles ascertained the redox behaviour and the good electrochemical activity of obtained PDPA samples. The probable mechanistic aspect behind the formation of PDPA nanostructures through this simple and efficient route is discussed.     

Effect of imbibed moisture on monotonic and low-velocity impact behavior of injection over-molded short/continuous fiber reinforced polypropylene composites

Design of automotive components with over-molded short/continuous fiber reinforced thermoplastic composites necessitates understanding of their behavior under extreme outdoor conditions. The short, quasi-isotropic and over-molded short/continuous glass fiber reinforced polypropylene (PP) composite specimens were prepared as per standard and immersed in water until equilibration to study their relative moisture absorption characteristics and consequent mechanical behavior. As the absorbed moisture mostly occupied the interface between fiber and matrix in laminated composite inserts and moisture absorption of short fiber composite core is insignificant, the moisture absorption of over-molded composites is just above 50% of that of laminated composites. The flexural, interlaminar shear and impact behavior of equilibrated composites is primarily governed by the quantum of imbibed moisture of composite materials. Optical analysis of failed moisture equilibrated over-molded specimens showed a marginal delamination between plies of the inserts without any perceptible damage within the short fiber composite similar to dry as molded specimens.     

Electrochemical synthesis and characterization of poly(aniline-co-1-amino-9,10-anthraquinone), a nanosized conducting copolymer

The electrochemical copolymerization of aniline (ANI) with 1-amino-9,10-anthraquinone (1-AAQ) was carried out in 4 M sulfuric acid by potential cycling in the potential range of −0.1 V to 1.3 V vs. SCE. Copolymer films were grown from different feed ratios of ANI and 1-AAQ (0.2:0.8, 0.4:0.6, 0.5:0.5, 0.6:0.4, 0.8:0.2) on a glassy carbon electrode (GCE). Studies on the effect of scan rate on the conductivity of the copolymer film confirmed the formation of a stable conducting copolymer film. The FTIR spectrum recorded for the copolymer film provides concrete evidence of copolymer formation, since it indicates the presence of quinone units in the copolymer backbone. XRD data (particle size: 47 nm) and SEM (grain size: 100 nm) micrographs provide a clear picture of the nano-sized polymeric particles formed. It is envisaged that the newly reported copolymer could be a useful material for performing the catalytic reduction of oxygen in an acidic medium—a useful process for fuel cell applications.