Photon and vibration synergism on planar defects induced 2D-graphitic carbon nitride for ultrafast remediation of dyes and antibiotic ampicillin

Journal of Materials Science - Hybrid oxidation methodologies (HOMs) and active site enrichment of 2D nanocatalyst through defects induction are ubiquitously used for generating adequate reactive...     

Physical Aging of Amorphous Fructose

ABSTRACT: Physical aging of amorphous anhydrous fructose at temperature 5 °C and at 22 °C was studied using differential scanning calorimetry (DSC). The dynamic glass transition temperature, T_g0 for unaged samples was 16 °C and 13.3 °C for heating rate of 10 °C/min and 1 °C/min, respectively. The fictive temperature, T_f0 for unaged samples calculated by Richardson and Savill method was 12 °C, which is close to the dynamic value obtained from the lower DSC heating rate. The fictive temperature T_f of the aged fructose glasses at temperatures both below and above the transition region was fitted well by a non-exponential decay function (Williams-Watts form). Aging above the transition region (22 °C) for 18 d increased both the dynamic glass transition temperature T_g and the fictive temperature T_f. However, aging below the transition region (5 °C) for 1 d increased the dynamic glass transition temperature T_g but decreased the fictive temperature T_f.     

Testing viability of cross subsidy using time-variant price elasticities of industrial demand for electricity: Indian experience

Indian electric tariffs are characterized by very high rates for industrial and commercial classes to permit subsidized electric consumption by residential and agricultural customers. We investigate the viability of this policy using monthly data for 1997–2003 on electric consumption by a few large industrial customers under the aegis of a small distribution company in the state of Uttar Pradesh. For a given price/cost ratio, it can be shown that if the cross-subsidizing class’ electricity demand is sufficiently elastic, increasing the class’ rates fail to recover incremental cross-subsidy necessary to support additional revenues for subsidized classes. This suboptimality is tested by individually estimating time-variant price-elasticities of demand for these industrial customers using Box-Cox and linear regressions. We find that at least for some of these customers, cross-subsidy was suboptimal prior to as late as October 2001, when rates were changed following reforms.     

Synthesis, Characterization, and Cytotoxicity Analysis of a Biodegradable Polyurethane

A polyester urethane was synthesized for use in a biodegradable scaffold. The polyurethane was synthesized in a two-step process: first, ester diol was synthesized from lactic acid and polyethylene glycol 400 (PEG 400), then it was polymerized with toluene diisocyanate using dibutyl tin dilaurate (DBTDL) as a catalyst to form a polyester urethane. Polyester urethane has tensile strength of 51-59 MPa and elongation at fracture of 369-439%. FTIR and XRD were used to confirm the formation and structure of the polymer. Hydrolytic degradation was studied in different alkali solutions and in saline water. In order to assess the cellular response of this material, cytotoxicity analysis was carried out against the cell line.     

Design and characterization of asymetrical super-lattice Si/4H-SiC pin photo diode array: a potential opto-sensor for future applications in bio-medical domain

Microsystem Technologies - Photo-sensors are integral part of different bio-medical diagnostic equipment. Each type of bio-molecules possess unique spectral fingerprint in visible wavelength region...     

Dual-Metal Double-Gate with Low-k/High-k Oxide Stack Junctionless MOSFET for a Wide Range of Protein Detection: a Fully Electrostatic Based Numerical Approach

Silicon - We investigate the performance of a dielectric modulated dual-metal double-gate with low-k/high-k oxide stack junctionless MOSFET (DM-DG-LK/HK-S JL-MOSFET) based sensor device for...     

A Novel DUF569 Gene Is a Positive Regulator of the Drought Stress Response in Arabidopsis

In the last two decades, global environmental change has increased abiotic stress on plants and severely affected crops. For example, drought stress is a serious abiotic stress that rapidly and substantially alters the morphological, physiological, and molecular responses of plants. In Arabidopsis, several drought-responsive genes have been identified; however, the underlying molecular mechanism of drought tolerance in plants remains largely unclear. Here, we report that the “domain of unknown function” novel gene DUF569 (AT1G69890) positively regulates drought stress in Arabidopsis. The Arabidopsis loss-of-function mutant atduf569 showed significant sensitivity to drought stress, i.e., severe wilting at the rosette-leaf stage after water was withheld for 3 days. Importantly, the mutant plant did not recover after rewatering, unlike wild-type (WT) plants. In addition, atduf569 plants showed significantly lower abscisic acid accumulation under optimal and drought-stress conditions, as well as significantly higher electrolyte leakage when compared with WT Col-0 plants. Spectrophotometric analyses also indicated a significantly lower accumulation of polyphenols, flavonoids, carotenoids, and chlorophylls in atduf569 mutant plants. Overall, our results suggest that novel DUF569 is a positive regulator of the response to drought in Arabidopsis.     

Role of heat transfer and thermal conductivity in the crystallization behavior of polypropylene‐containing additives: A phenomenological model

The thermal conductivity of a filler and the thermal conductivity of a composite made from that filler influence the heat‐transfer process during melt processing. The heat‐transfer process from the melt to the mold wall becomes an important factor in developing the skin–core morphology. These aspects were examined in this study. The thermal conductivity of polypropylene–filler composites was estimated with a standard model for various fillers such as calcium carbonate, talc, silica, wollastonite, mica, and carbon fibers. The rate of cooling under given conditions, including the melting temperature, mold wall temperature, mass of the composite, and filler content, was estimated with standard heat‐transfer equations. The time to attain the crystallization temperature for polypropylene was evaluated with a regression method with differential temperature steps. The crystallization curves were experimentally determined for the different fillers, and from them, the induction period for the onset of crystallization was estimated. These observations were correlated with the expected trends from the aforementioned formalism. The excellent fit of the curves showed that in all these cases, the thermal conductivity of the filler and composite played a dominant role in controlling the onset of the crystallization process. However, the nucleation effects became important in the later stages after the crystallization temperature was attained. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2994–2999, 2003