Study of the morphology and mechanical properties of polypropylene composites with silica or rice‐husk

The mechanical, morphological behavior and water absorption characteristics of polypropylene (PP) and silica, or PP and rice‐husk, composites have been studied. The silica used in this study as filler was a commercial type produced from soluble glass or rice husks. The compatibilizing effect of PP grafted with monomethyl itaconate (PP‐g‐MMI) and/or with vinyltriethoxysilane (PP‐g‐VTES) as polar monomers on the mechanical properties and water absorption was also investigated. In general, a high loading of the studied fillers in the polymer matrix increases the stiffness and the water absorption capacity. This effect is more noticeable in the tensile modulus of the PP/silica composite with PP‐g‐VTES as compatibilizer. However, the increase of the rice‐husk charge as a natural filler in the PP matrix decreases the stiffness, and in the presence of PP‐g‐MMI as compatibilizer in PP/rice‐husk, the tensile modulus and water absorption of the composite were improved. The better adhesion and phase continuity in the PP/silica and PP/rice‐husk composites with different compatibilizers was confirmed by the morphological study. Copyright © 2004 Society of Chemical Industry     

Methodology for evaluating a novel education technology: a case study of handheld video games in Chile

Many school systems, in both the developed and developing world, are implementing educational technology to assist in student learning. However, there is no clear consensus on how to evaluate these new technologies. This paper proposes a comprehensive methodology for estimating the value of a new educational technology in three steps: benefit analysis, through the administration of a well-designed experiment; cost analysis, which incorporates costs to weigh against the benefits; and feasibility analysis, which introduces real-world concerns that may affect the ability to actually implement the technology. To illustrate the methodology, a case study from Chile is used where portable educational video games were introduced into first and second grade classrooms with the aim of improving learning in mathematics and language. This paper demonstrates the importance of all three steps in the evaluation process and provides a framework for future analyses.     

Influence of grafted polypropylene on the mechanical properties of mineral‐filled polypropylene composites

The purpose of this work was to study how mineral fillers would behave in a polypropylene (PP) matrix when PP modified with maleic anhydride (MA) and/or itaconic acid (IA) was used as a coupling agent in the preparation of mineral‐filled PP composites. The composites were characterized with tensile mechanical measurements and morphological analysis. The optimum amount of the coupling agent to be used to obtain composites with improved mechanical properties was established. The results indicated that these coupling agents enhanced the tensile strength of the composites significantly, and the extent of the coupling effect depended on the nature of the interface that formed. The incorporation of coupling agents enhanced the resistance to deformation of the composite. The behavior of IA‐modified PP as a coupling agent was similar to that of a commercial MA‐modified PP for the filled PP composites. Evidence of improved interfacial bonding was revealed by scanning electron microscopy studies, which examined the surfaces of fractured tensile test specimens; their microstructures confirmed the mechanical results with respect to the observed homogeneous or optimized dispersion of the mineral‐filler phase in these composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2343–2350, 2007     

Indecomposability of free algebras in some subvarieties of residuated lattices and their bounded subreducts

In this paper, we show that free algebras in the variety of residuated lattices and some of its subvarieties are directly indecomposable and show, as a consequence, the direct indecomposability of free algebras for some classes of their bounded implicative subreducts.     

Ball Milling of Amaranth Starch-Enriched Fraction. Changes on Particle Size,Starch Crystallinity,and Functionality as a Function of Milling Energy

Starch-enriched fractions of amaranth grain were obtained from planetary ball milling and subsequently studied for particle size reduction, hydration properties, and crystallinity loss. Wide-angle X-ray scattering (WAXS) was used to evaluate the crystalline of starch-enriched fractions, using an iterative smoothing algorithm to estimate amorphous background scattering. This methodology was then used to determine initial crystallinity and monitor crystallinity loss during this process. The attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) showed that ball-milling treatment significantly decreased (p?<?0.05) the intensity ratios of the bands at 1,039 and 1,014 cm^?1 corresponding to the crystalline/amorphous part of starch structure. Starch crystallinity degree decreased by ball milling due to starch amorphization during this process. An excellent correlation was found between crystallinity degree obtained by WAXS and ATR-FTIR data for the whole ball-milled-analyzed samples. The energy required for size reduction was satisfactorily explained using a generalized grinding equation. A decrease of span and median diameter (D ₅₀) indicated sample homogenization during ball milling. Water absorption index and water solubility increased with crystallinity loss during process. The flour produced at the higher milling energy (6.52 kJ/g), with a mean size of 68?±?1 μm, showed a low crystallinity degree (<5 %), and high water absorption and solubility indexes in comparison to the starch-enriched fraction sample. Particle activation provided by ball-milling process can offer chances for starch application such as sorbent agent in food or pharmaceutical industries.     

A review of energy efficiency label of street lighting systems

There are very few countries that have provisions addressing the energy efficiency of the whole street lighting system, such as Spain or the Netherlands. Nevertheless, there is not an agreement about how energy efficiency must be assessed. The Spanish Government contemplates it in the Royal Decree 1890/2008 with the goal of improving energy savings and efficiency. However, this has not obtained the expected results. Nowadays, energy efficiency of this kind of systems is assessed using a label. In the case of Spain, this label only assesses one magnitude. The contributions of this paper are two evaluation systems (kiviat diagram and pie chart) which assess five magnitudes: lamps, energy efficiency index, light pollution, renewable energy contribution, and harness of the luminous flux using dimming. After that, a survey was done to study several subjects: (1) if citizens are aware about the efficiency of street lighting systems, (2) whether the sample of colors used in the label is adequate, and (3) if our proposed systems could replace the current evaluation system. Finally, the paper finishes with the conclusions of the survey.     

Improvement of Centrifugal Cryoconcentration by Ice Recovery Applied to Orange Juice

Centrifugal cryoconcentration, a concentration technique employed for fruit juices, involves challenges that still have to be overcome. The improvement of centrifugal cryoconcentration by recovery of ice fractions applied to orange juice is evaluated. The concentration process was performed with three consecutive cryoconcentration cycles and two recirculated ices. The solutes in the concentrated samples increased progressively six times after three cycles compared to the initial concentration of solids. The ice recovery samples increase the overall efficiency of the centrifugal cryoconcentration technique applied to orange juice.