Production of alumina fibre through jute fibre substrate

Alumina fibre has been produced using jute fibre as substrate material at temperatures lower than 1600 C in a reducing atmosphere. Processed jute fibre was chemically pretreated by saturation with Al₂Cl₆ · 12H₂O, coked and then pyrolysed to obtain alumina fibre. Chemical pretreatment conditions have been determined by following weight loss measurements of the jute fibre at 0.1 to 0.6 N solutions of NaOH, KOH, NH₄OH, Na₂CO₃, K₂CO₃, HCl and acetic acid. The effect of heat treatment on the jute fibre and jute fibre + aluminium salt has been studied from 150 to 1600 C. Trace elements present (Fe₂O₃, SiO₂, K₂O, Na₂O, CaO, MgO, ZnO, MnO, V₂O₅, P₂O₅, CuO) on heat-treated products have been determined by atomic absorption spectrometry. Optical and scanning electron micrographs of representative samples showing growth mechanism are presented. The effect of copper, nickel and platinum catalysts and fluxing agents such as K₂O and Na₂O in fibre formation has also been examined. Particle size and surface area analyses of intermediate and final products have been carried out. Changes in 2 values are plotted for various products from X-ray diffraction studies. It is conceived that the porous surface of cellulosic fibrils in the jute fibre adsorbs the AlCl₃ molecules which decompose to oxide and are gradually shaped to the fibrous form during the course of thermal treatment in a reducing atmosphere and due to the high surface area.     

A PC-controlled microwave tomographic scanner for breast imaging

This article presents the design and development of a personal computer based controller for a microwave tomographic system for breast cancer detection. The system uses motorized, dual-polarized antennas and a custom-made GUI interface to control stepper motors, a wideband vector network analyzer (VNA) and to coordinate data acquisition and archival in a local MDSPlus database. Both copolar and cross-polar scattered field components can be measured directly. Experimental results are presented to validate the various functionalities of the scanner.     

Production of (S)-β-Nitro Alcohols by Enantioselective C−C Bond Cleavage with an R-Selective Hydroxynitrile Lyase

Hydroxynitrile lyase (HNL)-catalysed stereoselective synthesis of β-nitro alcohols from aldehydes and nitroalkanes is considered an efficient biocatalytic approach. However, only one S-selective HNL—Hevea brasiliensis (HbHNL)—exists that is appropriate for the synthesis of (S)-β-nitro alcohols from the corresponding aldehydes. Further, synthesis catalysed by HbHNL is limited by low specific activity and moderate yields. We have prepared a number of (S)-β-nitro alcohols, by kinetic resolution with the aid of an R-selective HNL from Arabidopsis thaliana (AtHNL). Optimization of the reaction conditions for AtHNL-catalysed stereoselective C−C bond cleavage of racemic 2-nitro-1-phenylethanol (NPE) produced (S)-NPE (together with benzaldehyde and nitromethane, largely from the R enantiomer) in up to 99 % ee and with 47 % conversion. This is the fastest HNL-catalysed route known so far for the synthesis of a series of (S)-β-nitro alcohols. This approach widens the application of AtHNL for the synthesis not only of (R)- but also of (S)-β-nitro alcohols from the appropriate substrates. Without the need for the discovery of a new enzyme, but rather by use of a retro-Henry approach, it was used to generate a number of (S)-β-nitro alcohols by taking advantage of the substrate selectivity of AtHNL.     

Dry machining of aluminum for proper selection of cutting tool: tool performance and tool wear

Machining of aluminum and its alloy is very difficult due to the adhesion and diffusion of aluminum, thus the formation of built-up edge (BUE) on the surface. The BUE, which affects the surface integrity and tool life significantly, affects the service and performance of the workpiece. The minimization of BUE was carried out by selection of proper cutting speed, feed, depth of cut, and cutting tool material. This paper presents machining of rolled aluminum at cutting speeds of 336, 426, and 540 m/min, the feeds of 0.045, 0.06, and 0.09 mm/rev, and a constant depth of cut of 0.2 mm in dry condition. Five cutting tools WC SPUN grade, WC SPGN grade, WC + PVD (physical vapor deposition) TiN coating, WC + Ti (C, N) + Al₂O₃ PVD multilayer coatings, and PCD (polycrystalline diamond) were utilized for the experiments. The surface roughness produced, total flank wear, and cut chip thicknesses were measured. The characterization of the tool was carried out by a scanning electron microscope (SEM) equipped with energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) pattern. The chip underface was analyzed for the study of chip deformation produced after machining. The results indicated that the PCD tool provides better results in terms of roughness, tool wear, and smoother chip underface. It provides promising results in all aspects.     

Superconducting gap function and upper critical field in the presence of inhomogeneous magnetic order

Rare earth ternary superconductors are known to exhibit oscillatory magnetic orders below their superconducting transition temperatures. The study of behaviour of superconducting electrons in an inhomogeneous magnetic field is therefore important for such systems. We report here the results of our theoretical study of superconducting gap function Δ(T) and upper critical fieldH _c2 (T). The results are applied to analyse and explain the variation of Δ(T) andH _c2 (T) in case of NdRh₄B₄.     

A dual polarized aperture coupled circular patch antenna using a C-shaped coupling slot

The design and development of a dual linearly polarized aperture coupled circular microstrip patch antenna at C-band are presented. The antenna uses a novel configuration of symmetric and asymmetric coupling slots. Variations in isolation between orthogonal feedlines and antenna axial ratio with the position of coupling slots are studied and broadband isolation and axial ratio are achieved. The prototype antenna yields 7.6 dBi peak gain, 70/spl deg/ 3-dB beam width, 25 dB cross-polarization levels and an isolation better than 28 dB between the two ports. With an external quadrature hybrid coupler connected to the two orthogonal feedlines, the antenna yields 3-dB axial ratio bandwidth of more than 30% at 5.8 GHz.     

Relation of change in geometrical parameters in the thermal performance of solar chimney

Journal of Mechanical Science and Technology - The article deals with the effects of change in dimensions of solar chimney upon the thermodynamic characteristics of the air flowing inside it. The...     

Mineral element composition of spinach

An extensive study has been made on the mineral element compositions of spinach leaves and stems. Twenty two locally grown different spinach samples have been analysed for 16 elements using ICP and atomic absorption spectrophotometric techniques. Both spinach leaves and stems were analysed separately. A detailed elucidation of the inorganic matrix in spinach leaves and stems has been provided. © 1998 SCI.     

Nano-liposomal dry powder inhaler of Amiloride Hydrochloride

The purpose of this study was to encapsulate Amiloride Hydrochloride into nano-liposomes, incorporate it into dry powder inhaler, and to provide prolonged effective concentration in airways to enhance mucociliary clearance and prevent secondary infection in cystic fibrosis. Liposomes were prepared by thin film hydration technique and then dispersion was passed through high pressure homogenizer to achieve size of nanometer range. Nano-liposomes were separated by centrifugation and were characterized. They were dispersed in phosphate buffer saline pH 7.4 containing carriers (lactose/sucrose/mannitol), and glycine as anti-adherent. The resultant dispersion was spray dried. The spray dried powders were characterized and in vitro drug release studies were performed using phosphate buffer saline pH 7.4. In vitro and in vivo drug pulmonary deposition was carried out using Andersen Cascade Impactor and by estimating drug in bronchial alveolar lavage and lung homogenate after intratracheal instillation in rats respectively. Nano-liposomes were found to have mean volume diameter of 198 +/- 15 nm, and 57% +/- 1.9% of drug entrapment. Mannitol based formulation was found to have low density, good flowability, particle size of 6.7 +/- 0.6 microm determined by Malvern MasterSizer, maximum fine particle fraction of 67.6 +/- 0.6%, mean mass aerodynamic diameter 2.3 +/- 0.1 microm, and geometric standard deviation 2.4 +/- 0.1. Developed formulations were found to have prolonged drug release following Higuchi's Controlled Release model and in vivo studies showed maximal retention time of drug of 12 hrs within the lungs and slow clearance from the lungs. This study provides a practical approach for direct lung delivery of Amiloride Hydrochloride encapsulated in liposomes for controlled and prolonged retention at the site of action from dry powder inhaler. It can provide a promising alternative to the presently available nebulizers in terms of prolonged pharmacological effect, reducing systemic side effects such as potassium retention due to rapid clearance of the drug from lungs in patients suffering from cystic fibrosis.