Enzymatic biodiesel production: Technical and economical considerations

It is well documented in the literature that enzymatic processing of oils and fats for biodiesel is technically feasible. However, with very few exceptions, enzyme technology is not currently used in commercial‐scale biodiesel production. This is mainly due to non‐optimized process design and a lack of available cost‐effective enzymes. The technology to re‐use enzymes has typically proven insufficient for the processes to be competitive. However, literature data documenting the productivity of enzymatic biodiesel together with the development of new immobilization technology indicates that enzyme catalysts can become cost effective compared to chemical processing. This work reviews the enzymatic processing of oils and fats into biodiesel with focus on process design and economy.     

Emission Of Volatile And Semivolatile Organic Compounds From Waterborne Paints – The Effect Of The Film Thickness

A waterborne paint was applied to tin plated steel sheets with three different film thicknesses. The emission of volatile and semivolaile organic compounds ((S) VOCs) from the samples was measured in small climatic chambers under standard conditions over a two-week period. The purpose of the study was to evaluate the effect of the film thickness on the emission rate decay. First order decay models, including sink effects for the high boiling (S) VOCs, were fitted to the concentration versus time data. The results showed that the first order rate constants decrease with increasing film thickness. In uddition, the results indicated that the emissions of the (S)VOCs in the waterborne paint film seemed to be controlled by evaporation. The thicknesses of paint films used in climatic chamber tests to estimate emission rates for product compurison or emission prediction must be known in order to prevent erroneous conclusions     

Existence of discrete-time LQG-controllers

Existence results for the LQG-controller are investigated. An infimal Riccati equation based controller may potentially give closed loop eigenvalues on the unit circle. Assuming left and right invertibility it is shown that there exists an optimal controller if and only if the Riccati equation based controller stabilizes the closed loop system after removal of all its unobservable and uncontrollable modes. Furthermore this reduced controller is the optimal controller, and its transfer function is unique. This existence condition is a considerable simplification of the more general geometric condition recently derived by Trentelman and Stoorvogel.     

A computational fluid dynamic analysis of gas and particle flow in flame spraying

The flame spraying process, which is a common industrial thermal spraying application, has been analyzed by means of three-dimensional computational fluid dynamics (CFD) simulations. The process used at the Volvo Aero Corporation for the coating of fan and compressor housings has been modeled. The process uses the Metco 6P torch (Metco, Westbury, NY), which ejects a mixture of acetylene and oxygen at high speed through a ring of 16 orifices to form the flame. A stream of argon gas flowing through an orifice in the center of the ring carries a powder of nickel-covered bentonite through the flame to the spray substrate. The torch is cooled by a flow of air through an outer ring of 9 orifices. The simulation emulated reality closely by including the individual inlets for fuel, cooling air, and injected particles. The gas combustion was simulated as a turbulent, multicomponent chemically reacting flow. The standard, two-equation k-ε turbulence model was used. The chemical reaction rates appeared as source terms in the species transport equations. They were computed from the contributions of the Arrhenius rate expressions and the Magnussen and Hjertager eddy dissipation model. The first simulations included several intermediate chemical substances whose predicted concentration agreed favorably with measurements. Later, more simplified simulations incorporated only the global chemical reaction involving the initial and the final products, with corrections to the thermal properties being made to account for the missing intermediaries. The gas velocity and temperature fields predicted by the later simulations compared satisfactorily to those predicted by the earlier, more elaborate, ones. Therefore, the final simulations, which incorporated injected particles, were conducted employing the simplified model with only the global reaction. An in-house finite difference code was developed to calculate particle properties. Allowance was made for elliptical shapes, phase changes, and internal heat transfer with regard to the composite material. The particle velocities and temperatures predicted by the final simulations compared fairly well with experimental results obtained with the optical DPV2000 system.     

像素与矢量

智能对象的出现使得在Photoshop和Illustrator中使用像素和矢量之间的差别迅速消失。Derek Lea将会在制作一个结构完美且矢量明显的作品的同时为你解释原因。     

Word level bitwidth reduction for unbounded hardware model checking

In this paper we present a word-level model checking method that attempts to speed up safety property checking of industrial netlists. Our aim is to construct an algorithm that allows us to check both bounded and unbounded properties using standard bit-level model checking methods as back-end decision procedures, while incurring minimum runtime penalties for designs that are unsuited to our analysis. We do this by combining modifications of several previously known techniques into a static abstraction algorithm which is guaranteed to produce bit-level netlists that are as small or smaller than the original bitblasted designs. We evaluate our algorithm on several challenging hardware components.     

Cost efficiency comparison of four video-based techniques for assessing upper arm postures

Many video-based techniques for assessing postures at work have been developed. Choosing the most appropriate technique should be based on an evaluation of different alternatives in terms of their ability to produce posture information at low input costs, i.e. their cost efficiency. This study compared four video-based techniques for assessing upper arm postures, using cost and error data from an investigation on hairdressers. Labour costs associated with the posture assessments from the video recordings were the dominant factor in the cost efficiency comparison. Thus, a work sampling technique associated with relatively large errors appeared, in general, to be the most cost-efficient because it was labour-saving. Measurement bias and other costs than labour cost for posture assessment influenced the ranking and economic evaluation of techniques, as did the applied measurement strategy, i.e. the numbers of video recordings and repeated assessments of them. PRACTITIONER SUMMARY: The cost efficiency of four video-based techniques for assessing upper arm postures was compared. Work sampling techniques were in general more cost efficient than continuous observations since they were labour-saving. Whilst a labour cost dominated the comparison, 'hidden costs', bias and measurement strategy also influenced this dominance.     

Nodal DG-FEM solution of high-order Boussinesq-type equations

A discontinuous Galerkin finite-element method (DG-FEM) solution to a set of high-order Boussinesq-type equations for modelling highly nonlinear and dispersive water waves in one horizontal dimension is presented. The continuous equations are discretized using nodal polynomial basis functions of arbitrary order in space on each element of an unstructured computational domain. A fourth-order explicit Runge-Kutta scheme is used to advance the solution in time. Methods for introducing artificial damping to control mild nonlinear instabilities are also discussed. The accuracy and convergence of the model with both h (grid size) and p (order) refinement are confirmed for the linearized equations, and calculations are provided for two nonlinear test cases in one horizontal dimension: harmonic generation over a submerged bar, and reflection of a steep solitary wave from a vertical wall. Test cases for two horizontal dimensions will be considered in future work.     

Effect of interesterified fat mixtures on certain lipid indices in experimental fat metabolism disturbance

Groups of adult Wistar male and female rats were fed isoenergetically for a three and a six weeks period either with synthetic lipogenic diet containing 5% and 20% fat mixtures (in which sunflower oil and lard were blended according to the ratio of 35:65) or with the same synthetic diet containing the mixture of sunflower oil and interesterified lard in a similar ratio. A control group received a normal diet for 6 weeks, whereas one of the experimental groups (fed with the 20% fat mixture in the lipogenic diet for 6 weeks) was given the normal diet for an additional two weeks period. After the feeding periods had been completed serum HDL-C levels and the total lipid, triglyceride, total cholesterol, free fatty acid levels were determined in serum and liver. The distribution of fatty acids in liver and heart muscle was also evaluated. In comparison to the control values it has been found: 1. Consumption of the lipogenic diet which is known to increase the serum total lipid and total cholesterol content induced in male rats a smaller augmentation in these indices when consuming the 20% fat mixture with a P/S ratio approaching the ideal 1 values, than in case of a 5% fat mixture consumption. In case of female rats, considerable increases of the serum values, could be observed at both fat consumption levels. The serum triglyceride and HDL-C contents decreased for all experimental groups. 2. The total lipid and triglyceride content of the liver increased in a high degree, the fatty liver syndrome was developed--more rapidly in males than in females. The total lipid, triglyceride and total cholesterol contents of the liver of male rats exceeded those of females by 15-30%. 3. The interesterification of the lard component of fat mixture resulted in lipid indices similar to those without interesterification, or in certain cases, they were found to be even slightly more favourable, i.e. the biological effect of the technological change proved to be adequate. 4. After a two weeks regeneration period the serum values of the male rats approached closer the normal control values than those of the females which were decreasing from a very high level but the degree of decrease was greater for them than for the male rats. The lipid content of the liver showed similar values.(ABSTRACT TRUNCATED AT 400 WORDS)