An integrated system to remote monitor and control anaerobic wastewater treatment plants through the internet.

The TELEMAC project brings new methodologies from the Information and Science Technologies field to the world of water treatment. TELEMAC offers an advanced remote management system which adapts to most of the anaerobic wastewater treatment plants that do not benefit from a local expert in wastewater treatment. The TELEMAC system takes advantage of new sensors to better monitor the process dynamics and to run automatic controllers that stabilise the treatment plant, meet the depollution requirements and provide a biogas quality suitable for cogeneration. If the automatic system detects a failure which cannot be solved automatically or locally by a technician, then an expert from the TELEMAC Control Centre is contacted via the internet and manages the problem.     

Nonisothermal melt-crystallization kinetics of isotactic polypropylene synthesized with a metallocene catalyst and compounded with different quantities of an α nucleator

The nonisothermal crystallization kinetics of a metallocene-made isotactic polypropylene (m-iPP) and its compounds with 0.1 wt % and 0.3 wt % of a sorbitol derivative [1,3:2,4-bis(3,4-dimethylbenzylidene)sorbitol (DMDBS); an α nucleator] were investigated by differential scanning calorimetry at different cooling rates from the melt. The nucleation efficiency was proved by a significant increase in the crystallization temperatures (accompanied by a slight augmentation of the degree of crystallinity and a decrease in the crystal sizes). This increase in the crystallization temperatures led to higher amounts of fractional content in the γ polymorph, even though DMDBS was supposed to be a nucleator for the α form. The Avrami and Ozawa methods effectively described only the early stage of crystallization, whereas a combined Avrami–Ozawa method was valid for the whole crystallization process. The values of the exponent for this method decreased for nucleated samples in the later stage of crystallization, especially in the case of m-iPP with 0.3 wt % DMDBS added (m-iPP03). The activation energy of the process and the surface free energy were also estimated. The production of considerable proportions of the γ polymorph in m-iPP03 corresponded to higher values of the activation energy and lower values of the surface free energy. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Influence of deposition parameters on hole mobility in polymorphous silicon

Time-of-flight transient photoconductivity measurements reveal a monotonic increase with the deposition pressure in the hole mobility in polymorphous silicon for samples deposited under hydrogen dilution. With helium dilution, a maximum mobility that matches the highest value from H-dilution samples is measured at the intermediate pressure of 1.4 Torr. The deposition rate of those samples is twice the rate for the H-dilution ones. For the samples with the best hole mobilities, the valence-band tail is comparable to the one of standard hydrogenated amorphous silicon.     

Breast abscess with lethal septicemia due to Pseudomonas aeruginosa in a patient with AIDS

OBJECTIVE: The incidence of Pseudomonas aeruginosa in HIV-infected patients has increased over the last years. We describe a case of pseudomonal breast abscess complicated with fatal septicemia in an AIDS patient. CASE REPORT: A 21-year-old woman was admitted for fever, chills, nausea, vomiting and pain in the breast. She had a swelling in the right breast of 3 days duration. HIV infection had been confirmed 6 years earlier. CD4 count was 2/mm3. Surgical drainage produced a blue-green purulent discharge which grew Pseudomonas aeruginosa on culture. Despite cloxacilin, then ceftazidime and amikacin, initial improvement was followed 2 weeks later by nodular pulmonary infiltration with cavitation. P. aeruginosa was recovered from sputum and blood cultures, but stepwise resistance developed and the patient died 3 months after admission. DISCUSSION: Breast abscesses are infrequent in nonlactating women. P. aeruginosa is rarely involved, even in HIV patients. Due to the risk of resistance, prompt administration of appropriate antibiotics is required.     

Antagonistic effect of some starter cultures on enterobacteriaceae (E. coli)

The ability of Lactobacillus jensenii and Streptococcus 17SB to inbhibit Escherichia coli was demonstrated. The practical application of the inhibition was examined. Possible roles for several factors in the mechanism of inhibition by Lactobacillus jensenii and Streptococcus 17SB are briefly discussed. The effects of pH reached and acids produced by starters on the growth of Escherichia coli are described.     

The Utility of Land-Surface Model Simulations to Provide Drought Information in a Water Management Context Using Global and Local Forcing Datasets

Drought diagnosis and forecasting are fundamental issues regarding hydrological management in Spain, where recurrent water scarcity periods are normal. Land-surface models (LSMs) could provide relevant information for water managers on how drought conditions evolve. Here, we explore the usefulness of LSMs driven by atmospheric analyses with different resolutions and accuracies in simulating drought and its propagation to precipitation, soil moisture and streamflow through the system. We perform simulations for the 1980-2014 period with SASER (5 km resolution) and LEAFHYDRO (2.5 km resolution), which are forced by the Spanish SAFRAN dataset (at 5km and 30km resolutions), and the global eartH2Observe datasets at 0.25 degrees (including the MSWEP precipitation dataset). We produce standardized indices for precipitation (SPI), soil moisture (SSMI) and streamflow (SSI). The results show that the model structure uncertainty remains an important issue in current generation large-scale hydrological simulations based on LSMs. This is true for both the SSMI and SSI. The differences between the simulated SSMI and SSI are large, and the propagation scales for drought regarding both soil moisture and streamflow are overly dependent on the model structure. Forcing datasets have an impact on the uncertainty of the results but, in general, this impact is not as large as the uncertainty due to model formulation. Concerning the global products, the precipitation product that includes satellite observations (MSWEP) represents a large improvement compared with the product that does not.

     

Interactive visualization of medical volume models in mobile devices

Interactive visualization of volume models in standard mobile devices is a challenging present problem with increasing interest from new application fields like telemedicine. The complexity of present volume models in medical applications is continuously increasing, therefore increasing the gap between the available models and the rendering capabilities in low-end mobile clients. New and efficient rendering algorithms and interaction paradigms are required for these small platforms. In this paper, we propose a transfer function-aware compression and interaction scheme, for client-server architectures with visualization on standard mobile devices. The scheme is block-based, supporting adaptive ray-casting in the client. Our two-level ray-casting allows focusing on small details on targeted regions while keeping bounded memory requirements in the GPU of the client. Our approach includes a transfer function-aware compression scheme based on a local wavelet transformation, together with a bricking scheme that supports interactive inspection and levels of detail in the mobile device client. We also use a quantization technique that takes into account a perceptive metrics of the visual error. Our results show that we can have full interaction with high compression rates and with transmitted model sizes that can be of the order of a single photographic image.