Understanding TES microcalorimeter noise and energy resolution

We have performed numerical calculations of the noise in voltage-biased superconducting transition edge-based X-ray microcalorimeters, using a finite-element model. Details of the model are discussed, as well as results for different absorber geometries. The results are in agreement with an analytical model and show that the amount of internal thermal fluctuation noise can be reduced by using a segmented absorber. The simulation also agrees well with experimental data, which, for our detectors, contain no major unidentified noise sources. Furthermore, the discrepancy between the (small-signal) theoretical and the measured energy resolutions for 5.9 keV X-rays, for our sensors typically a factor of 2, is explained by a more accurate modelling of the sensor responsivity, taking into account the large signal behaviour.     

IPv6 delay and loss performance evolution

Although packet delay and loss are two important parameters of the Internet performance, to the best of our knowledge, the evolution of large‐scale IPv6 delay and loss performance has previously not been studied. In this paper, we analyze more than 600 end‐to‐end IPv6 paths between about 26 testboxes of RIPE Network Coordination Centre over two years, and compare the delay and loss performance over time with their IPv4 counterparts. We present and discuss the measurement methodologies and show that IPv6 paths have a higher delay and loss than their IPv4 counterparts. The main reason for the worse performance stems from IPv6‐in‐IPv4 tunnels rather than from native IPv6 paths and such tunnels are still widely used today. Copyright © 2007 John Wiley & Sons, Ltd.     

State multiplicity in CSTR-separator-recycle polymerisation systems

This article continues earlier work (Comput. Chem. Eng. 24 (2000) 209) concerning the design and control of isothermal reactor-separator-recycle systems. The multiplicity behaviour of six reaction systems of increasing complexity, from one-reactant, first-order reaction to chain-growth polymerisation, is investigated. Below a critical value of the plant Damkohler number, Da<Da^cr, the only steady state involves infinite flow rates. Feasible steady states become possible if the critical value is exceeded, Da>Da^cr. For one-reaction systems, one stable steady state is born at a transcritical bifurcation. For consecutive-reaction systems, including polymerisation, a fold bifurcation can lead to two feasible steady states. Moreover, the transcritical bifurcation is destroyed when two reactants are involved. If the gel-effect is included, a maximum of four steady states are possible. When multiple steady states exist, the achievable conversion is constrained by the instability of the low-conversion branch. This has practical importance for polymerisation systems when the radicals’ quasi-steady state assumption is not valid or the gel effect is significant.     

Alphabetic search: Comment on Klahr, Chase, and Lovelace (1983).

Response time (RT) curves were obtained from Ss who were instructed to search for following or preceding letters in the alphabet with respect to given stimulus letters. To describe the shape of these curves, D. Klahr et al (see record 1984-05777-001) proposed a search model. It was assumed that the alphabet was internally represented by a number of chunks of a few letters. Klahr et al assumed that serial searches occurred along 2 hierarchical levels: (1) a search for the correct chunk and (2) a search of the letters within the chunk. The Klahr et al model predicted an ascending sawtooth-shaped RT curve. However, according to the authors' analysis of the data, the RT curves did not show the expected sawtooth shapes. In order to find out whether the lack of empirical support for the model was an artifact of averaging the data, the experiment was replicated. It was found that individual RT curves did not show the shape characteristics that were predicted by the Klahr et al model either. The data supported the hypothesis that the access of letters was direct without any hierarchy, and that the retrieval of successive letters was determined by the variable associations between subsequent letters. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Prediction of compressive strength and optimization of mixture proportioning in ternary cementitious systems

This paper discussed the application of the method of the simplex-lattice design for predicting the properties of cement-based composites. On the basis of the compressive strength, its use was demonstrated on ternary paste systems composed of cement, silica fume and fly ash with constant water to binder ratio and a mass fraction of mineral admixtures not exceeding 30%. The regression model between compressive strength of paste and binder proportion was built up. The F-test method was utilized for validation of the regression model. The nonlinear programming system with upper and lower bound was solved. This allowed assessment of optimum mixture proportions and corresponding maximum compressive strength. It was shown that: (1) the 3rd-order regression model constructed by using the simplex-lattice design method could accurately predict the compressive strength in ternary paste system made of cement, silica fume and fly ash (the total mass fraction of all mineral admixtures was up to 30%); (2) to solve the nonlinear programming with the constraints of upper and lower bound played an important role in getting the optimum compressive strength and its corresponding mixture proportion at different ages; (3) the combination of the simplex-lattice design method and the optimization theory could be valuable tool for optimization of cement-based composites' properties.     

马铃薯淀粉的交联-聚合体化学修饰途径

The crosslink reaction is in fact from a commercial perspective the most reward ing reacting there is.It is used to adjust viscosity or rheology parameter in a large number of applications like p.e.the food or adhesives and textile printing.     

Quantitative aspects of two methods to dissolve collagen-free muscle proteins from acetone dry powders of Guelders ring sausage

Summary The purpose of this study was to find experimental conditions for the complete solubility of collagen-free muscle proteins (CFMP) using acetone powder of Guelders ring sausage. Preliminary experiments were carried out to choose the best procedure for preparing the acetone dry powder. Two different methods of acetone extraction of minced sausage were compared. The acetone dry mass (ADM) method using continuous extraction in a Soxhlet [2] apparatus gave better results than the acetone powder (ACP) method, which used a blender [1]. The ADM method was used for further investigations. ADM was extracted with two types of sodium dodecyl sulphate (SDS), containing solvents A and B. Solvent A contains a Tris-boric acid buffer (pH 8.2) with 1.5% (m/v) SDS and 0.05% (m/v) dithioerythreitol [3]. Solvent B is a borate-chloric acid buffer (pH 9.0) with 2.0% (m/v) SDS and 1.0% (m/v) mercapto-ethanol [2]. Both solvents showed a linear relationship between the quantities of CFMP in ADM and the dissolved CFMP. The linear relationships were found between quantities of 10.0 and 30.0 mg (solution A) and of 5.0 and 30.0 mg ADM (solution B) per ml solvent. The solubility of CFMP was better in solvent B than in solution A. Completely dissolved CFMP from ADM was only obtained in the case of 5.0 mg ADM in 1.0 ml solution B. These conditions will be used in liquid chromatography experiments, the results of which will be reported later.

---

Quantitative Aspekte zweier Verfahren für das Auflösen kollagenfreier Muskelproteine aus acetontrockenen Pulvern der Gelderschen Rauchwurst

Zusammenfassung Der Zweck dieser Untersuchungen ist, die experimentellen Bedingungen für die vollstän-dige Löslichkeit des kollagenfreien Muskelproteins (CFMP) aus dem Acetonpulver der Gelderschen Rauchwurst zu finden. Durch Vorversuche wurde die beste Arbeitsweise für das Zubereiten des Acetonpulvers gewählt. Zwei verschiedene Extraktionsverfahren mit zerkleinertem Wurstmaterial wurden miteinander verglichen. Die Methode mit der Acetontrockenmasse (ADM) mittels kontinuierlicher Extraktion [2] führte zu besseren Ergebnissen als die Methode mit Acetonpulver (ACP), wozu ein Mischgerät [1] verwendet wurde. Die ADM-Methode wurde für weitere Untersuchungen angewendet. ADM wurde mit zwei verschiedenen Extraktionslösungen von Natrium-Dodecylsulfat (SDS) (A und B) extrahiert. Lösung A enthalt einen Tris-Borsäure Puffer (pH 8,2) mit SDS (1,5%) und Dithioerithritol (0,05%) [3]. Die Lösung B enthält einen Borat-Salzsäure Puffer (pH 9,0) mit SDS (2,0%) und Mercapto-Ethanol (1,0%) [2]. Beide Extraktionslösungen zeigen ein lineares Verhalten zwischen den Mengen vom CFMP in ADM und in aufgelöstem CFMP. Diese Linearität wurde von 10,030,0 mg ADM (Lösungsmittel A) und von 5,030,0 mg ADM (Lösungsmittel B) gefunden. Die Lös-lichkeit in Lösung B ist gegeniiber Lösung A besser. Ein vollständig gelöstes CFMP aus ADM wurde nur bei der Extraktion von 5,0 mg ADM in 1,0 ml der Losung B erhalten. Diese Bedingung soll in unseren künftigen flüssigchromatographischen Experimenten verwendet werden.

---

---

Supported by a grant from the Hoofdinspectie Levensmiddelen of the Ministry of Welzijn, Volksgezondheid en Cultuur     

聚乙烯与聚丙烯单组分复合材料研究进展

综述了聚乙烯、聚丙烯单组分复合材料的发展概况及最新研究动态。介绍了熔融膜压法、粉末浸渍法、溶液浸渍法三类制备聚乙烯单组分复合材料的传统方法。重点介绍了热压法、共挤出热压法两类制备单组分复合材料的创新方法。分析了各制备方法的优缺点:熔融法、粉末法与溶液法效率均较低且复合材料中纤维含量较少,力学性能不佳;热压法由于初始材料为100％纤维,从而综合效率较高,力学性能良好,缺点为加工温度过于苛刻;共挤出热压法效率较高,在具有高的增强相含量的同时拥有较宽的加工温度范围,缺点为增强相强度需进一步提高。最后介绍了单组分复合材料的应用并对其研究与应用前景作了展望。     

Synthesis and properties of aminopropyl nucleic acids

Oligonucleotides that contain up to three aminopropyl nucleoside analogues have been synthesized. Dimers of aminopropyl adenine and thymidine were prepared and used as building blocks by applying phosphoramidite chemistry. Both R and S isomers of the aminopropyl nucleosides were used. This incorporation led to a reduction of thermal stability of double-stranded DNA. Furthermore, the (R)-adenine analogue, which yielded (S)-APNA, can be considered as a candidate for universal base pairing.