Effect of oxygen deficiency (δ) on transition temperature of yttrium cuprate superconductors

The nature of pairing mechanism as well as transition temperature of yttrium cuprates is discussed using the strong coupling theory. An interaction potential has been developed for the layered structure with two conducting CuO₂(a–b) layers in a unit cell. The interaction potential properly takes care of electron-electron, electron-phonon and electron-plasmon interactions. Furthermore, the electron-phonon coupling parameter (λ), the modified Coulomb repulsive parameter (μ*) and the 2D acoustic phonon (plasmon) energy as a function of oxygen deficiency is worked out. Finally, the superconducting transition temperature (T _c) is then evaluated by using these coupling parameters and obtainedT _c = 95(92)K for Y(Yb)Ba₂Cu₃O_7−δ superconductors withδ = 0·0. The model parameters estimated from the layered structure approach are consistent with the strong coupling theory. The result deduced on the variation ofT _c withδ are in fair agreement with the earlier reported data on yttrium cuprates. The analysis of the above results are discussed.     

A Monte Carlo simulation study of the mechanical and conformational properties of networks of helical polymers. I. General concepts

We study the mechanical and conformational properties of networks of helical polymers with a combination of Monte Carlo simulations based on the Wang-Landau algorithm and the three-chain model. We find that the stress-strain behavior of these networks has novel features not observed in typical networks made of synthetic polymers. In particular, we find that as these networks are stretched they first strengthen, then soften and finally strengthen again. This non-monotonic behavior of the stress correlates with the one of the helical content and is rationalized by the elongation-induced formation and melting of the helical structure of the polymer. We complement these results with a study of other conformational properties of the polymer strands that clarify the molecular mechanisms behind the mechanical behavior of these networks. Finally, we present a qualitative comparison of some of our results with the theoretical ones recently reported by Kutter and Terentjev.     

Target Location Estimation in Sensor Networks With Quantized Data

A signal intensity based maximum-likelihood (ML) target location estimator that uses quantized data is proposed for wireless sensor networks (WSNs). The signal intensity received at local sensors is assumed to be inversely proportional to the square of the distance from the target. The ML estimator and its corresponding Crameacuter-Rao lower bound (CRLB) are derived. Simulation results show that this estimator is much more accurate than the heuristic weighted average methods, and it can reach the CRLB even with a relatively small amount of data. In addition, the optimal design method for quantization thresholds, as well as two heuristic design methods, are presented. The heuristic design methods, which require minimum prior information about the system, prove to be very robust under various situations     

A novel hybrid deep learning method with cuckoo search algorithm for classification of arrhythmia disease using ECG signals

Neural Computing and Applications - This work presents an efficient hybridized approach for the classification of electrocardiogram (ECG) samples into crucial arrhythmia classes to detect heartbeat...     

CO2 laser annealing of plasma-deposited high-Tcsuperconducting thick films

Recent advances in the fabrication of high-T _c superconducting thick films demand processing techniques which can eliminate film/substrate interdifiusion that occurs during subsequent post-annealing heat treatment after the film is deposited, thereby limiting the application of the thick films for devices. The present study evaluates laser annealing techniques for plasma-deposited Y-Ba-Cu-O thick films using a high-energy CO₂ laser (10.6m) in a continuous wave mode. The results are compared with those obtained by conventional furnace annealing techniques necessary for post-heat treatment of as-deposited superconducting thick films. The high-T _c superconducting phase is recovered by cationic diffusion during subsequent post-annealing heat treatment. Crystallographic phases and microstructural characterization have been performed using XRD, SEM, and EPMA analytical techniques. The significance of the technology lies in the elimination of film/substrate interdiffusion problems, thereby resulting in high-quality superconducting thick films. The technology will significantly reduce the post-annealing times usually required by conventional furnace annealing techniques.     

Hexamethyl cyclotrisiloxane–styrene block copolymers and their chemical composition

Triblock copolymers of hexamethyl cyclotrisiloxane (D₃) and styrene were synthesized by first preparing “living” species of polystyrene dianion followed by polymerization of D₃. The chain lenght of polymeric blocks could be controlled in a predictable fashion leading to a central hard block of polystyrene and the two end segments of amorphous polydimethylsiloxane having narrow molecular weight distribution, were characterized by gel permeation chromatography. The chemical composition of block copolymers was determined by silicon analysis and infrared and nuclear magnetic resonance spectra. Thermal aging of block copolymers at 150, 200, and 300°C was also discussed.     

Fabrication and characterization of electrospun psyllium husk-based nanofibers for tissue regeneration

The present study reports for first time the blending of psyllium husk (PH) powder/gelatin (G) in the polymer-rich composition of polyvinyl alcohol (PVA) to make an electrospinnable solution. The composite was prepared in 3 different ratios viz., 100% (wt/wt) (PVA + PH), 75% + 25% (PVA + 75PH + 25G) (wt/wt) and 50% + 50% (PVA + 50PH + 50G) (wt/wt) in 6% PVA solution. Optimum electrospinning parameters were evaluated for all the prepared blends. The fabricated nanofibers were characterized by scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared, differential scanning calorimetry, porosity percentage, and fiber orientation using ImageJ software. A qualitative in vitro degradation study at room temperature is supported by SEM images. The cellular interactions were characterized by MTT assay of NIH-3T3 fibroblast cells for 2 and 4 days with an optimum cell growth of >50% by fourth day of culture and long-term cultivation of L929-RFP cells was observed for 10 days. The nanofibers were formed in the range of 49–600 nm. PVA + 75PH + 25G when cultured with L929-RFP cells exhibited highest fluorescence intensity and thus supported cellular proliferation significantly. Based on the results obtained from various analyses, we anticipate that fabricated psyllium-based nanofiber can be used as a promising candidate for wound healing and other biomedical applications.     

Antineoplastic and antioxidant potential of phycofabricated silver nanoparticles using microalgae Chlorella minutissima

This study for the first time reports on fresh water microalgae Chlorella minutissima aqueous extract (CmAe) which was utilized for the biogenic synthesis of silver nanoparticles and tested their antineoplastic potential against Liver Hepatocellular Carcinoma (HepG2) cell line. The characteristic colour change of the reaction mixture from greenish yellow to yellowish brown confirmed the synthesis of Chlorella minutissima silver nanoparticles (CmAgNPs). Microscopic analysis revealed CmAgNPs to be spherical‐shaped with particle size ranging from 10 to 30 nm. The carbohydrates and proteins distinctive peaks were observed in Fourier transform infrared spectroscopy (FTIR) spectra which suggested these biomolecules acted as reducing and capping agents. Further, the crystalline nature of CmAgNPs was confirmed by X‐ray diffraction (XRD) analysis. CmAgNPs showed maximum free radical scavenging proving it to be more potent antioxidant agent as compared to CmAe. The mortality rate of HepG2 cells treated with CmAgNPs was found to be 91.8 % at 120 μg/ml with IC₅₀ value 12.42 ± 1.096 μg/ml after 48 h whereas no effect was observed on normal Human Embryonic Kidney (HEK 293) cells. Fluorescent images of the treated HepG2 cells revealed the formation of apoptotic bodies, condensed nuclei and cell shrinkage indicating their effectiveness against the cancer cells.Inspec keywords: silver, nanoparticles, nanomedicine, microorganisms, cellular biophysics, nanofabrication, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, proteins, Fourier transform infrared spectra, molecular biophysics, X‐ray chemical analysis, X‐ray diffraction, kidney, cancer, biomedical materialsOther keywords: antineoplastic potential, antioxidant potential, phycofabricated silver nanoparticle, Chlorella minutissima, freshwater microalgae, aqueous extract, liver hepatocellular carcinoma cell line, CmAgNP synthesis, field emission scanning electron microscopy, high‐resolution transmission electron microscopy, atomic force microscopy, dynamic light scattering, carbohydrate, protein, Fourier transform infrared spectroscopy, biomolecule, energy‐dispersive X‐ray spectroscopy, elemental silver signal, CmAgNP crystalline, X‐ray diffraction analysis, antioxidant agent, HepG2 cell mortality rate, human embryonic kidney, HEK 293 cell, fluorescent image, apoptotic body formation, condensed nuclei, cell shrinkage, cancer cell, antineoplastic agent, Ag     

K–La–MgO as heterogeneous catalyst for synthesis of 3-(2-hydroxyethyl)-1,3-oxazolidin-2-one from diethanol amine and carbon dioxide

Cost-effective valorization of carbon dioxide into bulk and specialty chemicals using catalysis will be attractive in the foreseeable future. 1,3-Oxazolidin-2-one derivatives are one of the important classes of heterocyclic compounds which have wide applications in pharmaceutical industries due to their biological activities such as antibacterial, antimicrobial, antiseptic. Various synthetic routes are employed to prepare these compounds which include phosgenation, oxidative carbonylation, etc., which make use of polluting chemicals and homogeneous catalysts. The heterogeneous catalytic processes to synthesize these derivatives are quite limited. Thus, developing a green route which is environmental friendly is highly desirable. The current work deals with development of a heterogeneous reusable catalyst and its application to synthesize 1,3-oxazolidin-2-one derivatives using carbon dioxide as a C1 source. The fact that no use of promoter or organic co-catalyst is made in the current process makes the synthesis route more favorable. Pure La–MgO and K–La–MgO with different K loading (1, 3, 5, and 7 wt%) synthesized by combustion route were screened for carbonylation of diethanol amine. 5% K–La–MgO was found to be the best catalyst. The catalyst was well characterized in virgin form and after use by various analytical techniques like TEM, SEM, XRD, CO₂ and NH₃-TPD, BET surface area analysis. With 5% K–La/MgO, 72% conversion of diethanol amine was achieved with 100% selectivity of the desired product at optimum conditions, i.e., 150 °C, 5 wt% K–La/MgO catalyst loading of 0.02 g/cm³ and 2.0 MPa CO₂ pressure. Reaction mechanism was proposed and kinetic model developed. The apparent activation energy was calculated as 18.76 kcal/mol. The catalyst was robust and recyclable. The process is clean and green.