TSTL: the template scripting testing language

International Journal on Software Tools for Technology Transfer - A test harness, in automated test generation, defines the set of valid tests for a system, as well as their correctness properties....     

Regenerated cellulose nanocomposites reinforced with exfoliated graphite nanosheets using BMIMCL ionic liquid

Green nanocomposites of regenerated cellulose/exfoliated graphite nanosheets films with low nanofiller loadings were prepared using environmentally benign 1-butyl-3-methylimidazolium chloride (BMIMCl) ionic liquid. X-ray diffraction revealed well developed intercalated nanocomposites. The tensile strength and Young's modulus of the prepared nanocomposites were increased by 97.5% and 172% respectively when 0.75 wt.% and 1 wt.% exfoliated graphite nanosheets were added. The results were validated using the Halpin–Tsai model. The exfoliated graphite nanosheets were unidirectionally aligned in the regenerated cellulose parallel to the surface of the nanocomposites as revealed by transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM). Also, the TEM and FESEM revealed uniform dispersion of the exfoliated graphite nanosheets and good interaction between the nanofillers and the matrix. The addition of the exfoliated graphite nanosheets enhanced the thermal stability and reduced the water absorption and diffusivity of the nanocomposites.     

A Modified Method for the Determination of N‐Nitrosodiethanolamine in Coconut Diethanolamide Using HPLC with Dual‐Wavelength UV–Vis Detector

A simple and novel method based on high‐performance liquid chromatography with dual‐wavelength ultraviolet detection at 234 and 254 nm has been developed for the determination of underivatized N‐nitrosodiethanolamine in coconut diethanolamide. The correlation coefficient obtained shows that the method is correct.     

A Robust Peak-to-Average Power Ratio Reduction Scheme by Inserting Dummy Signals with Enhanced Partial Transmit Sequence in OFDM Systems

Peak-to-average power ratio (PAPR) is one of the main drawbacks in orthogonal frequency division multiplexing (OFDM) systems. High PAPR forces the power amplifier to back off in order to operate in its linear region, which degrades the power efficiency of the system. Several PAPR reduction techniques have been developed, but most of them have not considered both complexity and PAPR reduction. In this paper, a novel PAPR reduction scheme based on the insertion of dummy sequences to an enhanced partial transmit sequence is proposed. By applying this scheme the PAPR performance is enhanced compared to the conventional methods while the complexity is significantly reduced. Numerical analysis is carried out with OFDM signal and QPSK modulation.     

The partial replacement of silica or calcium carbonate by halloysite nanotubes as fillers in ethylene propylene diene monomer composites

The effect of partial replacement of silica or calcium carbonate (CaCO₃) by halloysite nanotubes (HNTs) on the curing behavior, tensile properties, dynamic mechanical properties, and morphological characteristics of ethylene propylene diene monomer (EPDM) composites was studied. Five different compositions of EPDM/Silica/HNT and EPDM/CaCO₃/HNT compounds (i.e. 100/30/0, 100/25/5, 100/15/15, 100/5/25, and 100/0/30 parts per hundred rubber (phr)) were prepared on a two‐roll mill. The results indicated that the replacement of CaCO₃ by HNTs increased the tensile strength, elongation at break (E_b), and tensile modulus of composites from 0 to 30 phr of HNTs whereas for silica, the maximum tensile strength and E_b occurred at 5 phr loading of HNTs with an enhanced stress at 300% elongation (M300). The curing results show that, with replacement of silica or CaCO₃ by HNTs, the cure time (t₉₀) and cure rate (CRI) were decreased and increased, respectively. Scanning electron microscopy investigation confirmed that co‐incorporation of 5 phr of HNTs with silica would improve the dispersion of silica and enhanced the interactions between fillers and EPDM matrix. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Low Complexity Partial Transmit Sequence with Complex Gain Memory Predistortion in OFDM Systems

In this paper the peak to average power ratio (PAPR) reduction and digital predistortion effects in orthogonal frequency division multiplexing (OFDM) systems are investigated. By applying a predistortion technique called complex gain memory predistortion (CGMP), power amplifier works at higher power efficiency. The proposed enhanced partial transmit sequence scheme is applied for PAPR reduction and integration with CGMP technique results in increasing in OFDM system efficiency and prolonged battery life. Simulation and results are examined with actual power amplifier and OFDM signal with quadrature phase shift keying (QPSK) modulation.     

Peak‐to‐average power ratio reduction and digital predistortion effects in power amplifiers in OFDM system

In this paper, the effects of peak‐to‐average power ratio reduction in nonlinear power amplifiers (PAs) by considering memory effects and of digital predistortion are investigated. A new predistortion technique is proposed, which is called the complex gain memory predistortion (CGMP) method. The CGMP is applied to compensate the dynamic memory effects of PAs. The conventional partial transmit sequence method is applied for peak‐to‐average power ratio reduction, and combining it with the CGMP results in efficiency enhancement and spectrum efficiency improvement. Simulation and results are examined with the two types of PAs and with an OFDM signal with quadrature phase‐shift keying modulation. Copyright © 2011 John Wiley & Sons, Ltd.     

A low complexity high efficiency hybrid multiplicative-additive crest factor reduction for OFDM systems

In this paper, we propose a novel technique to reduce the crest factor (CF) in orthogonal frequency division multiplexing systems. It consists of two inverse fast Fourier transform (IFFT) blocks, the input symbols of the first IFFT are the mapped symbols, whereas the input symbols of the second IFFT are the summations of the absolute value of the real part of the outer signal constellation points and zero symbols. First, the output of the two IFFT blocks is partitioned into four subblocks, which are subsequently used to rearrange the subblocks with padding zeros in a specific manner. Then, a new optimization scheme is introduced, in which only a single two-phase sequence and four iterations need to be applied. Numerical analysis shows that the proposed hybrid technique achieves better CF reduction performance with significantly lower complexity and better bit error rate performance than the existing scrambling (multiplicative) and additive CF techniques.     

Exploiting a fleet of UAVs for monitoring and data acquisition of a distributed sensor network

Neural Computing and Applications - This study proposes an efficient data collection strategy exploiting a team of unmanned aerial vehicles (UAVs) to monitor and collect the data of a large...