Hall current effects on MHD flow of chemically reacting fluid through a porous medium with heat source

We considered the magnetohydrodynamic (MHD) free convective flow of an incompressible electrically conducting viscous fluid past an infinite vertical permeable porous plate with a uniform transverse magnetic field, heat source and chemical reaction in a rotating frame taking Hall current effects into account. The momentum equations for the fluid flow during absorbent medium are controlled by the Brinkman model. Through the undisturbed state, both the plate and fluid are in a rigid body rotation by the uniform angular velocity perpendicular to an infinite vertical plate. The perpendicular surface is subject to the homogeneous invariable suction at a right angle to it and the heat on the surface varies about a non-zero unvarying average whereas the warmth of complimentary flow is invariable. The systematic solutions of the velocity, temperature, and concentration distributions are acquired systematically by utilizing the perturbation method. The velocity expressions consist of steady-state and fluctuating situations. It is revealed that the steady part of the velocity field has a three-layer characteristic while the oscillatory part of the fluid field exhibits a multi-layer characteristic. The influence of various governing flow parameters on the velocity, temperature, and concentration are analyzed graphically. We also discuss computational results for the skin friction, Nusselt number, and Sherwood number in the tabular forms.     

Ferromagnetic nano model study for the peristaltic flow in a plumb duct with permeable walls

Microsystem Technologies - The purpose of the present enquiry is to analyse the mechanics of an incompressible fluid, with water as base fluid, through a radially symmetric plumb duct with...     

Corrosion behavior of under‐, peak‐, and over‐aged 6063 alloy: A comparative study

The mechanical property of age‐hardenable Al‐alloys is governed by the state of ageing, which determines the microstructure and consequently, their corrosion behavior which is a vital aspect for a number of applications. This article presents a comparative assessment of corrosion behavior of under‐, peak‐ and over‐aged Al‐Mg‐Si alloy. Corrosion characteristics have been determined via immersion tests in 0.1 M ortho‐phosphoric acid solution and intergranular corrosion (IGC) tests. Corroded surfaces are examined by field emission scanning electron micrographs‐energy dispersive spectroscopy and 3D optical profilometer. The obtained results reveal that the corrosion rate at a specific immersion time as well as the depth of IGC increases in the order for under‐, peak‐, and over‐aged states. Irrespective of the state of ageing, corrosion loss increases linearly but the rate of corrosion decreases rapidly with increasing immersion time. The dominant mode of corrosion in under‐aged alloy is identified as localized pitting, while peak‐aged is highly susceptible to IGC in contrast extensive pitting corrosion is observed for over‐aged alloy. The observed differences in corrosion behavior are explained considering characteristics of precipitates. Formation of β (Mg₂Si) in case of over‐aged alloy and presence of inclusions like AlFeMnSi particles are found to accelerate pitting corrosion.     

Stability and thermophysical properties of fly ash nanofluid for heat transfer applications

Improving the performance of heat transfer fluids is altogether significant. The best approach for improving the thermal conductivity is the addition of nanoparticles to the base fluid. In the present study, specific heat, dynamic viscosity, and thermal conductivity of water-based Indian coal fly ash stable nanofluid for 0.1% to 0.5% volume concentration in the temperature range of 30 to 60°C has been investigated. To evaluate an average particle diameter of 11.5 nm, the fly ash nanoparticles were characterized with scanning electron microscopy and dynamic light scattering. Using zeta potential, the stability of nanofluid in the presence of surfactant Triton X-100 was tested. Thermal conductivity and viscosity of fly ash nanofluid increased, while specific heat decreased as volume concentration increased. The effect of temperature on the fly ash nanofluid was directly proportional to its thermal conductivity and specific heat and inversely proportional to viscosity.     

Fetal fast MR imaging: reproducibility, technical quality, and conspicuity of anatomy

PURPOSE: To evaluate the normal appearance of fetal anatomy, the conspicuity of fetal organs, the reproducibility of images, and the limitations to image quality with the use of half-Fourier, single-shot rapid acquisition with relaxation enhancement (RARE) magnetic resonance (MR) imaging. MATERIALS AND METHODS: Fifty-four fetuses of 49 pregnancies underwent MR imaging with the half-Fourier, single-shot RARE technique. Two reviewers attempted to identify 47 organs and anatomic regions in each fetus. Organ or region conspicuity, image quality, and the limitations of image quality were graded. RESULTS: Fetal anatomy was well depicted in fetuses over 20 weeks in gestational age. Fetal imaging was limited by gestational age of 20 weeks or less usually owing to the small size of the organ or region being evaluated and, less frequently, by motion. CONCLUSION: Half-Fourier, single-shot RARE MR imaging provided a detailed and reproducible evaluation of normal fetal anatomy, which can be used as a standard of reference in MR imaging of fetal anomalies.     

Change of foot size with weightbearing. A study of 2829 children 3 to 18 years of age

The change of foot length and width with age has been reported in a few anthropometric studies in the literature. However, the relationship with body height rarely is reported, and the dynamic effect of weightbearing on foot size has not been documented. In this series, 2829 children 3 to 18 years of age of equal gender distribution were included in the study. The foot length and width on weightbearing and nonweightbearing were measured with a special precision electronic caliper. The foot length and width were found to increase linearly from the age of 3 years until 12 years in girls and 15 years in boys. This was followed by a phase during which the increase plateaued. The foot length and width increased significantly on weightbearing at all ages in both genders with a mean of 2.1 to 4.4 mm or 3.1% to 4.8%, respectively. The foot length and width also were found to correlate significantly with the body height in both genders, with a correlation coefficient of 0.96 to 0.98. No significant differences were found between the sizes of the dominant and nondominant foot in either gender.     

A real-time road pricing system: The case of a two-link parallel network

A real-time road pricing system in the case of a two-link parallel network is proposed in this paper. The system that is based on a combination of Dynamic Programming and Neural Networks makes “on-line” decisions about road toll values. In the first phase of the proposed model, the best road toll sequences during certain time period are calculated off-line for many different patterns of vehicle arrivals. These toll sequences are computed using Dynamic Programming approach. In the second phase, learning from vehicle arrival patterns and the corresponding optimal toll sequences, neural network is trained. The results obtained during on-line tests are close to the best solution obtained off-line assuming that the arrival pattern is known.     

Efficient compression and network adaptive video coding for distributed video surveillance

The availability of cheap network based video cameras and the prevalence of wireless networks has lead to a major thrust towards deployment of large scale Distributed Video Surveillance (DVS) systems. This has opened up an important area of research to deal with the issues involved in DVS system for efficient collection and transmission of large scale video streams from the cameras at the guarded sites, to the end users in possibly constrained network conditions. In this paper, we propose a framework based on content-based video classification and scalable compression scheme to provide a robust bandwidth efficient video transmission for DVS. The scheme builds on a Discrete Wavelet Transform (DWT) based Color-Set Partitioning for Hierarchical Trees (CSPIHT) coding to obtain a scalable bitstream. Wavelet domain segmentation and compression assists in development of a DVS architecture. The architecture includes a novel module for dynamic allocation of Network bandwidth based on the current available resources and constraints. Different frame constituents are optimally coded based on their relative significance, perceptual quality, and available estimate of network bandwidth. Experimental result over different video sequences and simulations for Network conditions demonstrate the efficient performance of the approach.