Base-stock control for single-product tandem make-to-stock systems

In this paper, we consider a multiple-stage tandem production/inventory system producing a single product. Processing time at each stage is assumed to have a general stationary processing time distribution. The cost of holding work-in-process (WIP) inventory is different at each stage. Therefore, decisions on when to release work to the system as well as when to transfer WIP from one stage to another need to be made. We formulate this problem of release/production control as a Markov decision process. However, the optimal policy is rather complex, making its implementation impracticable in practice. We therefore investigate the performance of simple base stock policies. Our approach aggregates several stages into one and uses a simple approximation to compute 'approximately optimal' base stock levels. We present the results of a simulation study that tests the performance of our approximation in estimating the best base stock levels, and the performance of base stock policies as compared with the optimal policy.     

Effects of Coir Fiber and Maleic Anhydride Modification on the Properties of Thermoplastic Starch/PLA Composite Laminates

Coir fiber reinforced composite laminates made of poly(lactic acid) (PLA) with a thermoplastic starch (TPS) were fabricated. Modified thermoplastic starch (MTPS) was prepared by reactive blending of TPS with maleic anhydride (MA). The effect of coir fibers was of our main interest. The tensile properties, water absorption, and morphological properties of the fabricated composite laminates were investigated. The composite laminates between PLA and starch TPS were prepared using coir fiber as reinforcing core, and the physical, mechanical, and morphological properties were studied. The results suggested that the optimum fiber contents for maximum tensile strength for TPS/PLA and MTPS/PLA composites were 20 and 30 wt%, respectively. Using MA for chemical modification of TPS for PLA composites could reduce the PLA content of about 10 wt%, and improve the tensile about 20%. The volume swelling for the MTPS/PLA composites was much lower than that for the TPS/PLA composites, and the swelling reduced with increasing coir fiber content. Based on compressive strength, the pallets produced using MTPS/PLA composites showed a high potential to replace the commercial urea-formaldehyde/PLA composites. It clearly appeared that MA modification to TPS not only improve the mechanical properties of fiber reinforced PLA composites, but also made the PLA composites bio-degrade more quickly.     

Chromium behavior during cement-production processes: a clinkerization, hydration, and leaching study

The behavior of chromium during the production of cement clinker, during the hydration of cement and during the leaching of cement mortars was investigated. The microstructures of clinker and mortar properties were investigated using free lime, XRD, SEM/EDS, and TG/DTA techniques. Chromium was found to be incorporated in the clinker phase. The formation of new chromium compounds such as Ca(6)Al(4)Cr(2)O(15), Ca(5)Cr(3)O(12), Ca(5)Cr(2)SiO(12), and CaCr(2)O(7), with chromium oxidation states of +3, +4.6, +5, and +6, respectively, was detected. After the hydration process, additional chromium compounds were identified in the mortar matrix, including Ca(5)(CrO(4))(3)OH, CaCrO(4)·2H(2)O, and Al(2)(OH)(4)CrO(4), with chromium oxidation states of +4.6, +6, and +6, respectively. Additionally, some species of chromium, such as Cr(3+) from Ca(6)Al(4)Cr(2)O(15) and Cr(6+) from CaCr(2)O(7), CaCrO(4)·2H(2)O, and Al(2)(OH)(4)CrO(4), were leached during leaching tests, whereas other species remained in the mortar. The concentrations of chromium that leached from the mortar following U.S. EPA Method 1311 and EA NEN 7375:2004 leaching tests were higher than limits set by the U.S. EPA and the Environment Agency of England and Wales related to hazardous waste disposal in landfills. Thus, waste containing chromium should not be allowed to mix with raw materials in the cement manufacturing process.     

Base-stock control for single-product tandem make-to-stock systems

In this paper, we consider a multiple-stage tandem production/inventory system producing a single product. Processing time at each stage is assumed to have a general stationary processing time distribution. The cost of holding work-in-process (WIP) inventory is different at each stage. Therefore, decisions on when to release work to the system as well as when to transfer WIP from one stage to another need to be made. We formulate this problem of release/production control as a Markov decision process. However, the optimal policy is rather complex, making its implementation impracticable in practice. We therefore investigate the performance of simple base stock policies. Our approach aggregates several stages into one and uses a simple approximation to compute approximately optimal base stock levels. We present the results of a simulation study that tests the performance of our approximation in estimating the best base stock levels, and the performance of base stock policies as compared with the optimal policy.