A QoS Aware Resource Placement Approach Inspired on the Behavior of the Social Spider Mating Strategy in the Cloud Environment

Wireless Personal Communications - The efficient management of resource sharing plays a crucial role in the cloud execution environment. The constraints such as heterogeneity and dynamic nature of...     

Escherichia coli,Salmonella spp., and Staphylococcus aureus susceptibility to antimicrobials of human and veterinary importance in poultry sector of India

In India, little attention has been paid on antimicrobial resistance (AMR) in the context of developing “One Health” approach. Hence, utilizing multi-disciplinary approach, we assess the AMR level and dynamics/pattern of multi-drug resistance (MDR) in Escherichia coli, Salmonella spp., and Staphylococcus aureus circulating over the different stages of poultry in India. A total of 342 isolates including E. coli (n = 143), Salmonella spp. (n = 104), and S. aureus (n = 95) were recovered from fecal (n = 80) and cecal (n = 80) samples of chicken, collected across the different poultry-retail shops and poultry-farms located at urban and rural areas of Rajasthan, India, respectively. High rates of AMR to drugs that are critically/highly important both in human and veterinary medicine were observed among all the isolates. Upward trends in AMR prevalence was observed in poultry-retail shops than in poultry-farms. Notably, >90% of all the isolates were MDR, of particular, pattern/prevalence of MDR was substantially varied across the poultry-farms vs. poultry-retail shops. Our results indicate AMR including MDR to be common in E. coli, Salmonella spp., and S. aureus distributed frequently in poultry. The study encourages the formulation of national policy, programmes and further research with a “One Health” approach that can benefits to the human/animal and the environment.     

Effects of DEM Source,Spatial Resolution and Drainage Area Threshold Values on Hydrological Modeling

Water Resources Management - Automated computation of hydrological and morphometric parameters of any watershed are not only depended on Digital Elevation Model (DEM) resolution but also affected...     

Comparison of four RNA extraction methods for the detection of porcine reproductive and respiratory syndrome virus by RT-PCR

We investigated the effect of repeated cold stress (RCS) on the capsaicin-evoked release of glutamate from the primary afferent fibers of the rat, and compared this with the effect of inoculation of complete Freund's adjuvant (adjuvant inoculation). The release of glutamate was measured using a fluorometric on-line continuous monitoring system in which the immobilized glutamate dehydrogenase column was connected to an in vitro superfusion system. In the presence of 0.3 microM tetrodotoxin, the application of 1 microM capsaicin to spinal dorsal horn slices evoked glutamate release (18.6 +/- 1.2 pmol mg(-1) protein, n = 11). In rats subjected to RCS (RCS rats), the release of glutamate evoked by 1 microM capsaicin was markedly increased to 272% (n = 6, P < 0.05) of the value for the control group, although the basal release was not significantly altered (n = 6, P > 0.05). Adjuvant inoculation produced a significant increase in the basal and capsaicin (1 microM) evoked release of glutamate to 141 and 344% (n = 6, P < 0.05) of the value for the control group, respectively. The present results suggest that the facilitated release of glutamate from capsaicin-sensitive primary afferent terminals in the spinal dorsal horn is, at least in part, involved in the hyperalgesia of RCS rats as well as the complete Freund's adjuvant-induced hyperalgesia.     

Simulation and Modeling-implementing GaAs device models with SPICE

A method for evaluating the accuracy of a device model and its tendency toward convergence problems before implementing it as a SPICE primitive is presented. Two different GaAs MESFET models suitable for analyzing nonlinear analog and microwave circuits are implemented using generic SPICE primitives. It is shown that no modification to the SPICE program is required. Controlled sources are extensively used in implementing the models using this method     

Vinyl acetate monomer—a pilot plant study

The kinetics of the reaction of acetic acid and acetylene over zinc acetate-activated carbon catalyst was investigated over a wide range of process variables in a pilot reactor. Although various catalytic reaction mechanisms were postulated, the rate of reaction was most satisfactorily correlated by a mechanism of surface reaction between charged adsorbed acetic acid and acetylene, which assumes that the rate controlling step was the irreversible charged adsorption of acetylene and acetic acid.     

Managing signal integrity [PCB design]

As system clock rates race to 100 MHz and beyond, designers of printed-circuit boards and multichip modules must watch out for such high-speed effects as ground bounce, ringing, reflections, and crosstalk. The author describes how today's high-speed printed-circuit boards and multichip modules require integrated design systems that include signal integrity analysis tools     

Dependence of critical current density on microstructure and processing of high-Tc superconductors

Microstructural origins for reduced weak-link behavior in high-J_c melt-processed YBCO, spray pyrolyzed thick films of Tl-1223, metallic precursor Y-124 polycrystalline powder-in-tube (PIT) wires and PIT Bi-2212/2223 are discussed. Since the materials studied are the highest J_c, polycrystalline, high-T_c superconductors fabricated worldwide, the results provide important guidelines for further improvements in superconducting properties, thereby enabling practical applications of these materials. It is found that strongly linked current flow within domains of melt-processed 123 occurs effectively through a single crystal path. In c-axis oriented, polycrystalline Tl-1223 thick films, local in-plane texture has been found to play a crucial role in the reduced weak-link behavior. Formation of “colonies” of grains with a common c-axis and modest in-plane misorientation was observed. Furthermore, a colony boundary in general has a varying misorientation along the boundary. Large regions comprised primarily of low angle boundaries were observed. Percolative transport through a network of such small angle boundaries appears to provide the nonweak-linked current path. Although powder-in-tube BSCCO 2212 and 2223 also appear to have a “colony” microstructure, there are some important differences. Colonies in BSCCO consist of stacks of grains with similar c-axis orientation in contrast to colonies in Tl-1223 films where few grains are stacked on top of one another. Furthermore, most grains within a colony in BSCCO have the same lateral dimensions as that of the colony, resulting largely largely in “twist” boundaries. Further microstructural characterization of high-J_c PIT 2212 and 2223 is currently underway. In the case of Y-124 wires, weak macroscopic in-plane texture is found. Additional measurements are underway to determine if a sharper, local in-plane texture also exists. It is found that in three of the four types of superconductors studied, reduced weak-link behavior can be ascribed to some degree of biaxial alignment between grains, either on a “local” or a “global” scale.     

Critical current and microstructure in oxide superconductors

Critical current density (J_c) in the presence of a magnetic field is the property that currently limits many applications of the high-critical-temperature oxide superconductors. Poor current transmission at grain boundaries and weak flux pinning are responsible for the low critical current densities observed in bulk materials. Since 1986, substantial progress has been made both in understanding the microstructural factors affecting J_c and in developing practical fabrication methods. Much of the fundamental understanding has been obtained from studies of YBa₂Cu₃O_7?x while the bismuth and thallium-based compounds appear to offer greater potential as the basis for the first practical conductors.