Two-dimensional (2D) nanomaterials have attracted a great deal of attention since the discovery of graphene in 2004, due to their intriguing physicochemical properties and wide-ranging applications in catalysis, energy-related devices, electronics and optoelectronics. To maximize the potential of 2D nanomaterials for their technological applications, controlled assembly of 2D nanobulding blocks into integrated systems is critically needed. This mini review summarizes the reported strategies of 2D materials-based assembly into integrated functional nanostructures, from in-situ assembly method to post-synthesis assembly. The applications of 2D assembled integrated structures are also covered, especially in the areas of energy, electronics and sensing, and we conclude with discussion on the remaining challenges and potential directions in this emerging field.
Wax deposit properties are a significant concern in pipeline pigging during waxy crude oil transportation. In the present work, the impacts of flow conditions and oil properties on the wax precipitation characteristics of wax deposits are investigated. A flow loop apparatus was developed to conduct wax deposition experiments using four crude oils collected from different field pipes. The differential scanning calorimetry (DSC) technique was employed to observe the wax precipitation characteristics of crude oil and wax deposit. The results show that the wax content and the wax appearance temperature (WAT) of the deposits increase with shear stress and radial temperature gradient, and decrease with radial wax molecule concentration gradient near the pipe wall. The DSC tests on the wax deposits revealed that the deposit wax content is strongly correlated to the oil wax content. Furthermore, an empirical correlation was developed to predict the wax content and the WAT of the wax deposit. Verification of the empirical correlation using the different oils indicated that the average relative error of the wax content prediction and average absolute error of WAT prediction were 13.2% and 3.6°C, respectively. 相似文献
Journal of Mathematical Imaging and Vision - In this paper, we address the problem of denoising images obtained under low-light conditions for the Poisson shot noise model. Under such conditions,... 相似文献
In this study, the thickness and wax content of wax deposits were found to be thinner and lower in the polyethylene (PE) pipe than in the stainless steel (SS) pipe using a flow loop apparatus. The diffusivity of wax, radial thermal gradient, and wax precipitation rate in the PE and SS pipes were calculated and compared. It was found the diffusivity of wax in the PE pipe was higher and tended to enhance the wax deposition in the PE pipe, while the radial thermal gradient and wax precipitation rate were lower in the PE pipe and had the opposite effects. These factors are shown to be comparable with each other and the effect of the thermal gradient dominates the mass flux of wax from bulk to the oil-deposit interface and into the deposits finally, thus causing differences in thickness and wax content of deposits between the PE and SS pipes. 相似文献