Neutrophils in Tuberculosis: Cell Biology,Cellular Networking and Multitasking in Host Defense

Neutrophils readily infiltrate infection foci, phagocytose and usually destroy microbes. In tuberculosis (TB), a chronic pulmonary infection caused by Mycobacterium tuberculosis (Mtb), neutrophils harbor bacilli, are abundant in tissue lesions, and their abundances in blood correlate with poor disease outcomes in patients. The biology of these innate immune cells in TB is complex. Neutrophils have been assigned host-beneficial as well as deleterious roles. The short lifespan of neutrophils purified from blood poses challenges to cell biology studies, leaving intracellular biological processes and the precise consequences of Mtb–neutrophil interactions ill-defined. The phenotypic heterogeneity of neutrophils, and their propensity to engage in cellular cross-talk and to exert various functions during homeostasis and disease, have recently been reported, and such observations are newly emerging in TB. Here, we review the interactions of neutrophils with Mtb, including subcellular events and cell fate upon infection, and summarize the cross-talks between neutrophils and lung-residing and -recruited cells. We highlight the roles of neutrophils in TB pathophysiology, discussing recent findings from distinct models of pulmonary TB, and emphasize technical advances that could facilitate the discovery of novel neutrophil-related disease mechanisms and enrich our knowledge of TB pathogenesis.     

Microwave Detection of Stress-Induced Fatigue Cracks in Steel and Potential for Crack Opening Determination

Abstract

Fatigue crack detection in metals is an important practical issue in many industries. In this paper the results of detecting fatigue cracks, using the dominant mode approach, employing flange-mounted, open-ended, rectangular waveguides at several microwave frequencies are presented. The goal of this investigation has been to demonstrate the capability of this approach for detecting stress-induced cracks under various static loads. In addition, a correlation between the features of the measured crack characteristic signals and crack opening has been sought. The results show that at all of the investigated frequencies, cracks from being nearly closed to having openings of up to 0.0508 mm are detected effectively. Furthermore, it is found that the interaction of the flange edge with a crack results in features that can be used to enhance crack detection robustness significantly (i.e., increased probability of detection). Several features associated with these measured crack characteristic signals are shown to correlate linearly with crack opening. Such simple correlations may then be used to estimate a crack opening closely after it has been detected using this approach. A complete discussion of the results is also provided in this paper.     

Biogenic synthesis and thermo‐magnetic study of highly porous carbon nanotubes

Nanomaterials synthesis using natural sources is the technology to up come with advanced materials through extracts of plant, microorganisms, poultry waste etc. In this study, the authors report the synthesis of porous carbon nanotubes using high‐temperature decomposition technique facilitated by cobalt salt using chicken fats, a poultry waste as a precursor. Since chicken fats contain fatty acids which can decompose into short hydrocarbon chains and cobalt can act as the catalyst. The formation of carbon nanotubes was confirmed by Raman spectra, peaks at 1580 and 1350.46 cm⁻¹ confirmed the graphite mode G‐band and structural imperfections defect mode D‐band, respectively. Transmission electron microscopy showed the formation of tube‐like structures. Nitrogen adsorption–desorption studies showed the high‐surface area of 418.1 m² g⁻¹ with an estimated pore diameter of 8.1 nm. Thermogravimetry analysis–derivative thermogravimetric analysis–differential thermal analysis showed the instant weight loss at 517°C attributed to the rapid combustion of nanotubes. A vibrating‐sample magnetometer showed the paramagnetic nature of the so‐formed carbon nanotubes formed.Inspec keywords: transmission electron microscopy, infrared spectra, nanomagnetics, pyrolysis, decomposition, adsorption, desorption, carbon nanotubes, differential thermal analysis, thermal analysis, nanofabrication, Raman spectra, X‐ray diffraction, scanning electron microscopy, paramagnetic materialsOther keywords: biogenic synthesis, highly porous carbon nanotubes, microorganisms, high‐temperature decomposition technique, cobalt salt, chicken fats, fatty acids, short hydrocarbon chains, Raman spectra, graphite mode G‐band, structural imperfections defect mode D‐band, transmission electron microscopy, paramagnetic nature, thermo‐magnetic properties, poultry waste, nitrogen adsorption‐desorption studies, thermogravimetry analysis, differential thermal analysis, carbon nanotubes, temperature 517.0 degC, C     

Upgrading of biomass by means of torrefaction

We present results on upgrading of wood and briquettes by means of torrefaction. The torrefied products showed significantly less smoking during combustion and a relatively faster rate of combustion. The weight and energy yeilds of torrefied wood are 66.7–83.3 and 76.5–89.6%, respectively; the corresponding values for sawdust briquettes are 76.3–93.8 and 83.1–95.3%, respectively.     

Spatial distribution of biomass consumption as energy in rural areas of the Indo-Gangetic plain

Biomass is widely used as energy source in rural households in India. Biomass samples and socio-economic data have been collected at district level in the rural areas of Indo-Gangetic plain (IGP), India to determine the emissions of trace gases and aerosols from domestic fuels. Dung cake, fuelwood and crop residue are main sources of energy in rural areas of the IGP. Dung cake is the major domestic fuel (80-90%) in the rural areas of Delhi, Punjab, Haryana, Uttar Pradesh, Bihar and West Bengal, whereas, 99% of rural households in Uttarakhand use wood as the main energy source. Using crop production data and usage of crop residues as energy, new consumption values have been estimated (21.13 Mt). Present information on the domestic fuel usage would be helpful in determining budgets estimates of trace gases and aerosols for India.     

In vitro model improves the prediction of soil arsenic bioavailability: worst-case scenario

There is a strong interest in developing an in vitro arsenic (As) model that satisfactorily estimates the variability in in vivo relative oral bioavailability (RBA) measurements. Several in vitro tests have been developed, but none is universally accepted due to their limited success in predicting soil As RBA. A suite of amorphous and crystalline solid As phases were chosen, utilizing a worst-case scenario (WCS) that simulated fasting children's gastric solution chemistry. The objectives of this study were to (i) determine the effects of residence time, pH, and solid-to-solution ratio on As bioaccessibility and speciation in the in vitro gastric test; (ii) provide the fundamental basis for an optimized in vitro model constrained by the WCS; and (iii) validate the optimized in vitro test with the in vivo RBA obtained with BALB/c mice. The gastric pH was the only significant (p < 0.05) factor influencing solid As bioaccessibility. Bioaccessible As retained the oxidation state after its release from the solid into the gastric solution. The optimized in vitro model adequately predicted RBA values for a suite of solid As phases typically encountered in soils, with the exception of aluminum-based solids. This study is an excellent starting point for developing an in vitro test applicable to different As-contaminated soils.     

Formulation and evaluation of solid self-microemulsifying drug delivery system of chlorthalidone by spray drying technology

The main objective of this study was to prepare a solid self-microemulsifying drug delivery system (S-SMEDDS) by spray drying liquid SMEDDS with an inert solid carrier Aerosil 200 to improve the dissolution rate and permeability of chlorthalidone (CTD). The liquid SMEDDS was composed of CTD, oleic acid, tween 20, and PEG 200. Preliminary screening was performed to select proper component combination. Solubility of CTD was determined in various vehicles. Ternary phase diagram for four series was constructed to delineate the boundaries of the nanoemulsion domain. Optimized S-SMEDDS (S3) was evaluated for dispersibility test (13.30?±?0.95), percentage transmittance (99.50?±?0.002), turbidity (260.43?±?1.02), percent drug content (97.86?±?0.56), droplet size (159.4), polydispersity index (PDI, 0.30), and zeta potential (?12.4). Solid-state characterization was done by scanning electron microscopy (SEM), differential scanning calorimetry, X-ray powder diffraction (XRD), and Fourier transform infrared (FT-IR). The XRD analysis confirmed that there was no crystalline CTD in the S-SMEDDS. SEM study revealed adsorption of liquid SMEDDS on Aerosil 200. In vitro drug release study was performed using water and 0.1N HCl as dissolution medium and compared with plain drug and marketed tablet Thaiklor TM 12.5, and marked increase in rate and extent of dissolution of S-SMEDDS was observed. Ex vivo intestinal permeability study revealed that diffusion of drug was significantly higher from S-SMEDDS than that of suspension of plain drug. The solid SMEDDS formulation was stable. In conclusion, the S-SMEDDS might be an encouraging strategy to improve the oral absorption of CTD.     

Optimization of Physiological Growth Conditions for Maximal Gamma-linolenic Acid Production by Cunninghamella blakesleeana-JSK2

Effects of various cultural conditions on biomass, lipid and Gamma-linolenic acid (GLA) production were investigated in the oleaginous fungus Cunninghamella blakesleeana-JSK2 isolated from soil. The GLA production was influenced by various factors such as growth condition (static and shaken), incubation time, pH, temperature, carbon and nitrogen sources. The results indicated that optimum GLA production (21 %) was obtained when the fungus was grown under shaken condition at 120 rpm for 6 days with optimum pH and temperature of 6 and 28 °C ,respectively. Glucose and potassium nitrate enhanced the GLA production. Urea and sucrose were poor substances for biomass, lipid and GLA production.     

Wear Analysis of Extracted Polyethylene Acetabular Cups Using a 3D Optical Scanner

Wear analysis of total hip replacements (THRs) is considered one of the most relevant research areas helping to improve the longevity and overall design of THRs. The coordinate machine method (CMM) and Fourier profilometry are the most common methods for measuring THR wear. This article presents optical scanner digitalization as a new method for measuring the wear of polyethylene (PE) acetabular cups. The aim of this article is to explore the potential of this method for the PE wear measurements. Optical scans for the purposes of this study were produced using an ATOS Triple Scan 3D optical scanner. The optical scanner is efficient and it can measure a large number of points for polygonization and for further development of the preworn models. In this study, the scanner first generated point clouds on a sample of 13 retrieved ultra-high-molecular-weight polyethylene (UHMWPE) acetabular cups. Next, volumetric models of the cups were created by polygonizing the point clouds. Reverse engineering was used to develop models of the original acetabular cups using the geometry of the unworn parts of the retrieved cups. A comparison of the two models then showed the total volume of the PE debris. The optical scanning method was validated against the gravimetric method using three new acetabular cups that were worn out on a hip pendulum simulator. Validation shows that the optical scanning method is a valid method for wear analysis of the retrieved UHMWPE acetabular cups.